Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

Consolidated edition incorporating the sheets of the third edition (1969), plus supplements A, B, C, D, E, F, G, H, J, K, L, M, N, P, Q, and R valid on 1996-12-31.

Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit - Teil 2: Lampenfassungen

Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité - Partie 2: Douilles

Edition consolidée incorporant les feuilles de la troisième édition (1969) et de ses compléments A, B, C, D, E, F, G, H, J, K, L, M, N, P, Q, et R valable au 31 décembre 1996 .

Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne zamenljivosti in varnosti - 2. del: Okovi sijalk - Dopolnilo A51 (IEC 60061-2:1969/A51:2016 )

General Information

Status
Published
Publication Date
22-Sep-2016
Withdrawal Date
03-Jul-2019
Current Stage
6060 - Document made available - Publishing
Start Date
23-Sep-2016
Completion Date
23-Sep-2016

Relations

Buy Standard

Amendment
EN 60061-2:1999/A51:2016 - BARVE
English and French language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2016
Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne
zamenljivosti in varnosti - 2. del: Okovi sijalk - Dopolnilo A51 (IEC 60061-
2:1969/A51:2016 )
Lamp caps and holders together with gauges for the control of interchangeability and
safety - Part 2: Lampholders - Amendment 51 (IEC 60061-2:1969/A51:2016 )
Ta slovenski standard je istoveten z: EN 60061-2:1993/A51:2016
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60061-2:1993/A51

NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2016
ICS 29.140.10
English Version
Lamp caps and holders together with gauges
for the control of interchangeability and safety -
Part 2: Lampholders
(IEC 60061-2:1969/A51:2016)
Culots de lampes et douilles ainsi que calibres  Lampensockel und -fassungen sowie Lehren
pour le contrôle de l'interchangeabilité et de la sécurité - zur Kontrolle der Austauschbarkeit und Sicherheit -
Partie 2: Douilles Teil 2: Lampenfassungen
(IEC 60061-2:1969/A51:2016) (IEC 60061-2:1969/A51:2016)
This amendment A51 modifies the European Standard EN 60061-2:1993; it was approved by CENELEC on 2016-07-04. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60061-2:1993/A51:2016 E

European foreword
The text of document 34B/1854/FDIS, future IEC 60061-2:1969/A51, prepared by SC 34B "Lamp caps
and holders" of IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 60061-2:1993/A51:2016.
The following dates are fixed:
(dop) 2017-04-04
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2019-07-04
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60061-2:1969/A51:2016 was approved by CENELEC as a
European Standard without any modification.
NORME
INTERNATIONALE IEC
INTERNATIONAL 60061-2
STANDARD
AMENDEMENT 51
AMENDMENT 51
2016-05
Amendement 51
Culots de lampes et douilles ainsi que calibres

pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 2:
Douilles
Amendment 51
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 2:
Lampholders
Les feuilles de cet amendement sont à insérer dans
l'IEC 60061­2 (1969)
The sheets contained in this amendment are to be inserted
in IEC 60061­2 (1969)
 IEC 2016 Droits de reproduction réservés  Copyright - all rights reserved

International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch

NORME
INTERNATIONALE IEC
INTERNATIONAL 60061-2
Edition 3.51
STANDARD
2016-05
Modifiée selon les compléments/amended in accordance with supplements:

A(1970), B(1971), C(1972), D(1975), E(1977),
F(1980), G(1983), H(1987), J(1989), K(1992), L(1994),

M(1994), N(1995), P(1996), Q(1996), R(1996), S(1997)

et les amendements/and amendments 18(1998), 19(1999), 20(1999), 21(2000),

22(2001), 23(2001), 24(2001), 25(2002), 26(2002), 27(2002), 28(2003), 29(2003),

30(2003), 31(2004), 32(2004), 33(2005), 34(2006) 35(2007), 36(2007), 37(2008),

38(2009), 39(2009), 40(2010), 41(2010), 42(2010), 43(2011), 44(2011), 45(2012),

46(2013), 47(2013), 48(2014), 49(2015), 50(2015) et/and 51(2016)

Culots de lampes et douilles ainsi que calibres

pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 2:
Douilles
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 2:
Lampholders
 IEC 2016 Droits de reproduction réservés  Copyright - all rights reserved

Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch

IEC 60061-2:1969/AMD51:2016  IEC 2016 – 1 –

SOMMAIRE CONTENTS
DOUILLES - SOMMAIRE PAR DÉSIGNATION LAMPHOLDERS - CONTENTS BY DESIGNATION

Feuilles Sheet
Douilles PX26, PY26d-1 … PY26d-7 . 7005-5-4 Lampholders PX26, , PY26d-1 … PY26d-7 . 7005-5-4
Douille E11 . 7005-6-1 Lampholder E11 . 7005-6-1
Douille EY10 . 7005-7-1 Lampholder EY10 . 7005-7-1
Douilles pour culots à baïonnette BAX9s . 7005-8-1 Lampholders for bayonet caps BAX9s . 7005-8-1
Douilles pour culots à baïonnette BAY9s . 7005-9-1 Lampholders for bayonet caps BAY9s . 7005-9-1
Douilles à baïonnette B22d . 7005-10-8 Bayonet lampholders B22d . 7005-10-8
Douilles à baïonnette B22d-3(90°/135°) . 7005-10A-4 Bayonet lampholders B22d-3(90°/135°) . 7005-10A-4
Douilles pour culots à baïonnette Lampholders for bayonet automobile
pour automobiles BA7 . 7005-11-3 caps BA7 . 7005-11-3
Douilles pour culots à baïonnette Lampholders for bayonet automobile
pour automobiles BA9 . 7005-12-2 caps BA9 . 7005-12-2
Douilles BA15, BAU15, BAW15, BAY15 Lampholders BA15, BAU15, BAW15, BAY15
& BAZ15 . 7005-13-5 & BAZ15 . 7005-13-5
Douilles pour culots à baïonnette Lampholders for bayonet automobile
pour automobiles BA20 . 7005-14-2 caps BA20 . 7005-14-2
Douilles pour culots à baïonnette BA21-3 . 7005-15-2 Lampholders for bayonet caps BA21-3 . 7005-15-2
Douilles à baïonnette B15d . 7005-16-4 Bayonet lampholders B15d . 7005-16-4
Douilles à baïonnette BY22d . 7005-17-5 Bayonet lampholders BY22d . 7005-17-5
Douille pour culots à baïonette BAU15s . 7005-19-1 Lampholder for bayonet caps BAU15s . 7005-19-1
Position de la chemise filetée de la douille Edison Position of holder thread in relation to central
par rapport au contact central . 7005-20-6 contact of the Edison lampholder . 7005-20-6
Douilles E26 . 7005-21A-1 Lampholders E26 . 7005-21A-1
Douilles E39 . 7005-24A-3 Lampholders E39 . 7005-24A-3
Douille E12 . 7005-28-1 Lampholder E12 . 7005-28-1
Position de la chemise filetée par rapport aux Position of holder thread in relation to the central
contacts central et intermédiaire de la douille E26d . 7005-29-2 and intermediate contacts of the lampholder E26d . 7005-29-2
Douille préfocus EP10 . 7005-30-1 Prefocus lampholder EP10 . 7005-30-1
Douilles P20, PX20, PY20 & PZ20 . 7005-31-2 Lampholders P20, PX20, PY20 & PZ20 . 7005-31-2
Douilles P22 & PX22 . 7005-32-2 Lampholders P22 & PX22 . 7005-32-2
Douilles 2G13 . 7005-33-1 Lampholders 2G13 . 7005-33-1
Douille PX43t . 7005-34-1 Lampholder PX43t. 7005-34-1
Douille PX13.5s. 7005-35-1 Lampholder PX13.5s . 7005-35-1
Douille P26s . 7005-36-1  7005-36-1
Lampholder P26s .
Douille PKX22s . 7005-37-1 Lampholder PKX22s . 7005-37-1
Douilles P43t . 7005-39-4 Lampholders P43t . 7005-39-4
Douilles préfocus P28s . 7005-42-6 Prefocus lampholders P28s . 7005-42-6
Douille préfocus P40 . 7005-43-3 Prefocus lampholder P40 . 7005-43-3
Douille de précision P30s pour culot Precision holder P30s for prefocus
préfocus P30s-10.3 . 7005-44-2 cap P30s-10.3 . 7005-44-2
Douilles G17q, GX17q & GY17q . 7005-45-2 Lampholders G17q, GX17q & GY17q . 7005-45-2
Douille pour automobiles P14.5s . 7005-46-3 Lampholder for automobile lamps P14.5s . 7005-46-3
Douille PK22s . 7005-47-2 Lampholder PK22s . 7005-47-2
Distance de montage pour ensemble de Mounting of combined pair of inflexible
deux douilles non flexibles G13 . 7005-50-4 lampholders G13 . 7005-50-4
Distance de montage pour ensemble de Mounting distance of a combined pair of inflexible
deux douilles non flexibles G5 . 7005-51-4 lampholders G5 . 7005-51-4
Distance de montage pour ensemble de deux Mounting distance of a combined pair of lampholders
douilles GX5 . 7005-51A-1 GX5 . 7005-51A-1
Combinaisons de deux douilles R7s & RX7s . 7005-53-4 Combined pairs of lampholders R7s & RX7s . 7005-53-4
Douilles R7s & RX7s . 7005-53A-5 Lampholders R7s & RX7s . 7005-53A-5
Douille Fa6 . 7005-55-3 Lampholder Fa6 . 7005-55-3
Douille G10q . 7005-56-2 Lampholder G10q . 7005-56-2
Douille pour culot à deux contacts Lampholder for recessed double-contact
en retrait R17d . 7005-57-1 cap R17d . 7005-57-1
Douilles et connecteurs Fa8 . 7005-58-1 Lampholders and connectors Fa8 . 7005-58-1
Douil
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.