iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60875-1:1998

(Main)

Fibre optic branching devices - Part 1: Generic specification

Fibre optic branching devices - Part 1: Generic specification

Applicable to fibre optic branching devices, having all of the following general features: -they are passive (they contain no optoelectronic or other transducing elements); -they have three or more ports for the ingress and/or egress of optical power which is shared in a predetermined fashion; -the ports are optical fibres or optical fibre connectors.

Lichtwellenleiter-Verzweiger - Teil 1: Fachgrundspezifikation

Dispositifs de couplage pour fibres optiques - Partie 1: Spécification générique

S'applique aux dispositifs de couplage pour fibres optiques dont les caractéristiques générales sont les suivantes: - ils sont passifs (ne contiennent aucun élément opto-électronique ou autres éléments transducteurs); - ils ont au moins trois portes d'entrée et/ou de sortie de la puissance optique qu'ils répartissent selon un mode prédéterminé; - les portes sont des fibres optiques ou des connecteurs pour fibres optiques.

Fibre optic branching devices - Part 1: Generic specification (IEC 60875-1:1996)

General Information

Status
Withdrawn
Publication Date
19-Apr-1998
Withdrawal Date
30-Nov-1998
ICS
33.180.01 - Fibre optic systems in general
Technical Committee
CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
Drafting Committee
IEC/SC 86B - IEC_SC_86B
Parallel Committee
IEC/SC 86B - IEC_SC_86B
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
01-Nov-2003
Ref Project
SIST EN 60875-1:1999 - Fibre optic branching devices - Part 1: Generic specification (IEC 60875-1:1996)

Relations

Replaced By
EN 60875-1:2001 - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification
Effective Date
29-Jan-2023

Buy Standard

EN 60875-1:1999EN 60875-1:1999
PreviousNext
Standard
EN 60875-1:1999
English language
36 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60875-1:1999
01-maj-1999
Fibre optic branching devices - Part 1: Generic specification (IEC 60875-1:1996)
Fibre optic branching devices - Part 1: Generic specification (IEC 60875-1:1996)
Lichtwellenleiter-Verzweiger -- Teil 1: Fachgrundspezifikation
Dispositifs de couplage pour fibres optiques -- Partie 1: Spécification générique
Ta slovenski standard je istoveten z: EN 60875-1:1998
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 60875-1:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60875-1:1999

---------------------- Page: 2 ----------------------

SIST EN 60875-1:1999

---------------------- Page: 3 ----------------------

SIST EN 60875-1:1999

---------------------- Page: 4 ----------------------

SIST EN 60875-1:1999

---------------------- Page: 5 ----------------------

SIST EN 60875-1:1999

---------------------- Page: 6 ----------------------

SIST EN 60875-1:1999

---------------------- Page: 7 ----------------------

SIST EN 60875-1:1999

---------------------- Page: 8 ----------------------

SIST EN 60875-1:1999

---------------------- Page: 9 ----------------------

SIST EN 60875-1:1999

---------------------- Page: 10 ----------------------

SIST EN 60875-1:1999

---------------------- Page: 11 ----------------------

SIST EN 60875-1:1999

---------------------- Page: 12 ----------------------

SIST EN 60875-1:1999

---------------------- Page: 13 ----------------------

SIST EN 60875-1:1999

---------------------- Page: 14 ----------------------

SIST EN 60875-1:1999

---------------------- Page: 15 ----------------------

SIST EN 60875-1:1999

---------------------- Page: 16 ---------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61756-1:2020(Main)
Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems - Part 1: General and guidance
SIST EN IEC 61756-1:2020

IEC 61756-1:2019 covers general information on fibre management system interfaces. It includes the definitions and rules under which a fibre management system interface is created and it provides also criteria to identify the minimum bending radius for stored fibres. This document allows both single-mode and multimode fibre to be used. Liquid, gas or dust sealing requirements at the cable entry area or cable element ending are not covered in this document. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - addition of figures to show the interface between protective housing and fibre management system; - addition of definitions for protective housing, closure, wall box, street cabinets and optical distribution frame modules; - addition of table with dimensions of fusion splice protectors and mechanical splices; - addition of method to identify the minimum bending radius for stored fibres; - addition of clause for other factors relevant to fibre management systems; - addition of annex A for example of calculating the minimum bending radius of stored fibres in a fibre management system. Keywords: fibre management system interfaces, minimum bending radius for stored fibres

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TR 50682:2018(Main)
Consideration on the use of OTDRs to measure return loss of single-mode optical fibre connections
SIST-TP CLC/TR 50682:2018

The purpose of this document is to describe a round robin on return loss of single mode optical fibre connections. This includes the description of the samples, the test procedures and test instrumentation, results and conclusions.

  • Technical report
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61978-1:2014(Main)
Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification
SIST EN 61978-1:2014

IEC 61978-1:2014 applies to fibre optic passive chromatic dispersion compensators, all exhibiting the following features: - they are optically passive; - they have an optical input and an optical output for transmitting optical power; - the ports are optical fibres or optical fibre connectors; - they are wavelength sensitive; - they may be polarization sensitive. This standard establishes uniform requirements for the passive chromatic dispersion compensator. This third edition cancels and replaces the second edition, published in 2009, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - introduction of new terms and definitions; - revision of classifications; - addition of Annex E. Keywords: fibre optic passive chromatic dispersion compensators

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62074-1:2014(Main)
Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification
SIST EN 62074-1:2014

IEC 62074-1:2014(E) applies to fibre optic wavelength division multiplexing (WDM) devices. These have all of the following general features: - they are passive, in that they contain no optoelectronic or other transducing elements; - however they may use temperature control only to stabilize the device characteristics; - they exclude any optical switching functions; - they have three or more ports for the entry and/or exit of optical power, and share optical power among these ports in a predetermined fashion depending on the wavelength; - the ports are optical fibres, or optical fibre connectors. This standard establishes uniform requirements for the following: optical, mechanical and environmental properties. This second edition cancels and replaces the first edition, published in 2009, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - substantial updating to the definitions; - the addition of informative Annexes C to G, giving examples of technical information concerning WDM devices. Keywords: fibre optic wavelength division multiplexing, WDM, requirements for optical, mechanical and environmental properties

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
prEN IEC 62074-1:2024(Main)
Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification
oSIST prEN IEC 62074-1:2024

D133/C027: DOW = DOR + 12 months

  • Draft
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
FprEN IEC 61978-1:2024(Main)
Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification
kSIST FprEN IEC 61978-1:2024

D133/C027: DOW = DOR + 12 months

  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62343-1:2019/A1:2024(Amendment)
Dynamic modules - Part 1: Performance standards - General conditions
SIST EN IEC 62343-1:2019/A1:2024
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62343-2-1:2019/A1:2024(Amendment)
Dynamic modules - Part 2-1: Reliability qualification - Test template
SIST EN IEC 62343-2-1:2020/A1:2024
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61744:2023(Main)
Calibration of fibre optic chromatic dispersion test sets
SIST EN IEC 61744:2023

IEC 61744:2023 provides standard procedures for the calibration of optical fibre chromatic dispersion (CD) test sets. This document is applicable to all types of CD test sets, with the exception that measurements on multimode optical fibres are excluded. The purpose of this document is to define a standard procedure for calibrating optical fibre chromatic dispersion (CD) test sets. The detailed calibration steps used vary according to the measurement technique used in the CD test set. Whilst it is acknowledged that chromatic dispersion also occurs in multimode fibre and this fibre can be measured on many CD test sets, this document will restrict discussion to single mode fibre measurements applications only. The purpose of the procedures outlined in this document is to focus manufacturers and users of CD test sets toward the reduction of measurement uncertainty in chromatic dispersion determination in optical fibres under all applicable conditions. The procedures apply to calibration laboratories and to the manufacturers or users of CD test sets for the purpose of a) calibrating CD test sets, and b) evaluating the level of performance of the instrument. Use of the procedures also allows correct evaluation of CD test set uncertainty, relative and traceable to appropriate (for example, national) standards. This third edition cancels and replaces the second edition published in 2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) updated terms and definitions; b) the use of a reference fibre standard for calibration is now allowed and at the same level as the other calibration method; c) Annex B was split into a new Annex B (on calibration uncertainty, still normative) and a new Annex C (on uncertainty at operating conditions, informative); d) removed former C.3.4 on interferometric method since this method is no longer supported in IEC 60793-1-42; e) removed Annex D and other references in text to calibration compensation to align with other calibration documents; f) removed Annex E and other references in text to use of air wavelength since it is not used in the fibre domain.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61280-1-4:2023(Main)
Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Light source encircled flux measurement method
SIST EN IEC 61280-1-4:2023

IEC 61280-1-4:2023 is available as IEC 61280-1-4:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61280-1-4:2023 establishes the characterization process of the encircled flux measurement method of light sources intended to be used with multimode fibre. This document sets forth a procedure for the collection of two-dimensional fibre optic nearfield greyscale data and subsequent reduction to one-dimensional data expressed as a set of three sampled parametric functions of radius from the fibre’s optical centre. Estimation of the fibre core diameter is not an objective of this document. This third edition cancels and replaces the second edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - improvement of calibration procedure and calibration traceability; - improvement of fibre shaker description and requirements; - addition of pulsed light sources; - removal of a poorly traceable calibration process using a micro positioner.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day