EN 50632-2-6:2015/A2:2020

Electric motor-operated tools - Dust measurement procedure - Part 2-6: Particular requirements for hammers

This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected. This part of EN 50632 applies to hammers.

Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 2-6: Besondere Anforderungen für Hämmer

Outils électriques à moteur - Procédure de mesure de la poussière - Partie 2-6: Exigences particulières pour les marteaux

Elektromotorna orodja - Postopek meritve prahu - 2-6. del: Posebne zahteve za kladiva - Dopolnilo A2

General Information

• Status: Published
• Publication Date: 10-Dec-2020
• Withdrawal Date: 15-Nov-2022
• ICS: 25.140.20 - Electric tools
• Technical Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Drafting Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 11-Dec-2020
• Due Date: 05-Aug-2022
• Completion Date: 11-Dec-2020
• Ref Project: SIST EN 50632-2-6:2015/A2:2021 - Electric motor-operated tools - Dust measurement procedure - Part 2-6: Particular requirements for hammers

Relations

• Amends: EN 50632-2-6:2015 - Electric motor-operated tools - dust measurement procedure - Part 2-6: Particular requirements for hammers
• Effective Date: 23-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50632-2-6:2015/A2:2021
01-februar-2021
Elektromotorna orodja - Postopek meritve prahu - 2-6. del: Posebne zahteve za
kladiva - Dopolnilo A2
Electric motor-operated tools - Dust measurement procedure - Part 2-6: Particular
requirements for hammers
Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 2-6: Besondere
Anforderungen für Hämmer
Outils électriques à moteur - Procédure de mesure de la poussière - Partie 2-6:
Exigences particulières pour les marteaux
Ta slovenski standard je istoveten z: EN 50632-2-6:2015/A2:2020
ICS:
25.140.20 Električna orodja Electric tools
SIST EN 50632-2-6:2015/A2:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 50632-2-6:2015/A2:2021

---------------------- Page: 2 ----------------------
SIST EN 50632-2-6:2015/A2:2021


EUROPEAN STANDARD EN 50632-2-6:2015/A2

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2020
ICS 25.140.20

English Version
Electric motor-operated tools - Dust measurement procedure -
Part 2-6: Particular requirements for hammers
Outils électriques à moteur - Procédure de mesure de la Motorbetriebene Elektrowerkzeuge - Staubmessverfahren -
poussière - Partie 2-6: Exigences particulières pour les Teil 2-6: Besondere Anforderungen für Hämmer
marteaux
This amendment A2 modifies the European Standard EN 50632-2-6:2015; it was approved by CENELEC on 2020-11-16. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republ
...