EN IEC 60317-12:2020
(Main)Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120
Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120
IEC 60317-12:2020 is available as IEC 60317-12:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60317-12:2020 specifies the requirements of enamelled round copper winding wires of class 120 with a sole coating based on polyvinyl acetal or polyvinyl formal resin, which can be modified provided it retains the chemical identity of the original resin and meets all specified wire requirements. NOTE 1 A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. NOTE 2 Polyvinyl acetal is a general name for a family of thermoplastic vinyl resins produced by the condensation of polyvinyl alcohol with an aldehyde. Examples are polyvinyl acetal, polyvinyl formal and polyvinyl butyral. The range of nominal conductor diameters covered by this document is: - Grade 1: 0,040 mm up to and including 2,500 mm; - Grade 2: 0,040 mm up to and including 5,000 mm; - Grade 3: 0,080 mm up to and including 5,000 mm. The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1:2013. This fourth edition of IEC 60317-12 cancels and replaces the third edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - modification of the Scope; - addition of reference to transformer oil resistance test method in Clause 20.
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 12: Runddrähte aus Kupfer, lackisoliert mit Polyvinylacetal, Klasse 120
Spécifications pour types particuliers de fils de bobinage - Partie 12: Fil de section circulaire en cuivre émaillé avec acétal de polyvinyle, classe 120
IEC 60317-12:2020 est disponible sous forme de IEC 60317-12:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 60317-12:2020 spécifie les exigences relatives aux fils de bobinage de section circulaire en cuivre émaillés de classe 120 avec un revêtement simple à base de résine acétal de polyvinyle ou formal de polyvinyle qui peut être modifiée sous réserve qu'elle conserve l'identité chimique de la résine initiale et respecte l’ensemble des exigences spécifiées du fil. NOTE 1 Une résine modifiée est une résine dont les propriétés chimiques ont été modifiées ou qui contient un ou plusieurs additifs visant à améliorer certaines performances ou caractéristiques d'application. NOTE 2 L'acétal de polyvinyle est le nom générique désignant une famille de résines thermoplastiques vinyliques produites par la condensation de l'alcool polyvinylique avec un aldéhyde. Des exemples sont l'acétal de polyvinyle, le formal de polyvinyle et le butyral de polyvinyle. La gamme des diamètres nominaux des conducteurs couverts par le présent document est: - grade 1: 0,040 mm jusques et y compris 2,500 mm; - grade 2: 0,040 mm jusques et y compris 5,000 mm; - grade 3: 0,080 mm jusques et y compris 5,000 mm. Les diamètres nominaux du conducteur sont spécifiés à l'Article 4 de l'IEC 60317-0-1:2013. Cette quatrième édition de l'IEC 60317-12 annule et remplace la troisième édition parue en 2010. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - modification du domaine d’application; - ajout d’une référence à la méthode d’essai de résistance à l’huile de transformateur à l’Article 20.
Specifikacije za posebne vrste navijalnih žic - 12. del: S polivinil acetalom emajliran okrogel bakren vodnik, razred 120 (IEC 60317-12:2020)
Ta del standarda IEC 60317 določa zahteve za emajlirane okrogle bakrene vodnike razreda 120 z enojno prevleko na osnovi polivinil acetalne ali polivinil formalne smole, ki jo je mogoče spremeniti, če ohrani kemijsko identiteto izvirne smole in izpolnjuje vse določene zahteve za vodnike.
OPOMBA 1: Spremenjena smola je smola, ki je bila kemijsko spremenjena ali vsebuje enega ali več aditivov za izboljšanje določene lastnosti učinkovitosti ali uporabe.
OPOMBA 2: Polivinil acetal je splošno ime za družino termoplastičnih vinilnih smol, proizvedenih s kondenzacijo polivinil alkohola z aldehidom. Primeri takšnih smol so polivinil acetal, polivinil formal in polivinil butiral.
Razpon nazivnih premerov prevodnika, ki ga zajema ta dokument, je:
– razred 1: od 0,040 mm do vključno 2500 mm;
– razred 2: od 0,040 mm do vključno 5000 mm;
– razred 3: od 0,080 mm do vključno 5000 mm.
Nazivni premeri prevodnika so navedeni v točki 4 standarda IEC 60317-0-1:2013.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2020
Nadomešča:
SIST EN 60317-12:2010
Specifikacije za posebne vrste navijalnih žic - 12. del: S polivinil acetalom
emajliran okrogel bakren vodnik, razred 120 (IEC 60317-12:2020)
Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled
round copper wire, class 120 (IEC 60317-12:2020)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 12:
Runddrähte aus Kupfer, lackisoliert mit Polyvinylacetal, Klasse 120 (IEC 60317-12:2020)
Spécifications pour types particuliers de fils de bobinage - Partie 12: Fil de section
circulaire en cuivre émaillé avec acétal de polyvinyle, classe 120 (IEC 60317-12:2020)
Ta slovenski standard je istoveten z: EN IEC 60317-12:2020
ICS:
29.060.10 Žice Wires
77.150.30 Bakreni izdelki Copper products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60317-12
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2020
ICS 29.060.10 Supersedes EN 60317-12:2010 and all of its
amendments and corrigenda (if any)
English Version
Specifications for particular types of winding wires - Part 12:
Polyvinyl acetal enamelled round copper wire, class 120
(IEC 60317-12:2020)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 12: Fil de section circulaire en cuivre émaillé avec Wickeldrähten - Teil 12: Runddrähte aus Kupfer, lackisoliert
acétal de polyvinyle, classe 120 mit Polyvinylacetal, Klasse 120
(IEC 60317-12:2020) (IEC 60317-12:2020)
This European Standard was approved by CENELEC on 2020-07-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60317-12:2020 E
European foreword
The text of document 55/1841/FDIS, future edition 4 of IEC 60317-12, prepared by IEC/TC 55
"Winding wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-04-10
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-07-10
document have to be withdrawn
This document supersedes EN 60317-12:2010 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60317-12:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60264 (series) NOTE Harmonized as EN 60264 (series)
IEC 60317 (series) NOTE Harmonized as EN 60317 (series)
IEC 60851 (series) NOTE Harmonized as EN 60851 (series)
IEC 60851-4:2016 NOTE Harmonized as EN 60851-4:2016 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60317-0-1 2013 Specifications for particular types of winding EN 60317-0-1 2014
wires - Part 0-1: General requirements -
Enamelled round copper wire
+ A1 2019 + A1 2019
IEC 60317-12 ®
Edition 4.0 2020-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Specifications for particular types of winding wires –
Part 12: Polyvinyl acetal enamelled round copper wire, class 120
Spécifications pour types particuliers de fils de bobinage –
Partie 12: Fil de section circulaire en cuivre émaillé avec acétal de polyvinyle,
classe 120
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.060.10 ISBN 978-2-8322-8390-5
– 2 – IEC 60317-12:2020 © IEC 2020
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, general notes and appearance . 6
3.1 Terms and definitions . 6
3.2 General notes . 6
3.2.1 Methods of test . 6
3.2.2 Winding wire . 7
3.3 Appearance . 7
4 Dimensions. 7
5 Electrical resistance . 7
6 Elongation . 7
7 Springiness . 7
8 Flexibility and adherence . 7
9 Heat shock . 7
9.1 Nominal conductor diameters up to and including 1,600 mm . 7
9.2 Nominal conductor diameters over 1,600 mm . 8
10 Cut-through . 8
11 Resistance to abrasion (nominal conductor diameters from 0,250 mm up to and
including 2,500 mm) . 8
12 Resistance to solvents . 9
13 Breakdown voltage . 9
14 Continuity of insulation . 9
15 Temperature index . 9
16 Resistance to refrigerants . 9
17 Solderability . 9
18 Heat or solvent bonding . 10
19 Dielectric dissipation factor . 10
20 Resistance to transformer oil . 10
21 Loss of mass . 10
23 Pin hole test . 10
30 Packaging . 10
Bibliography . 11
Table 1 – Heat shock . 8
Table 2 – Resistance to abrasion . 9
IEC 60317-12:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES –
Part 12: Polyvinyl acetal enamelled round copper wire, class 120
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.