iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 62670-1:2014

(Main)

Photovoltaic concentrators (CPV) - Performance testing - Part 1: Standard conditions

Photovoltaic concentrators (CPV) - Performance testing - Part 1: Standard conditions

IEC 62670-1:2013 defines standard conditions for assessing the power produced by CPV systems and their photovoltaic subcomponents. The object is to define a consistent set of conditions so that power ratings noted on data sheets and nameplates will have a standard basis. Two sets of conditions are included to characterize: a) operating conditions, and b) test conditions.

Konzentrator-Photovoltaik (CPV) - Leistungsmessung - Teil 1: Standardprüfbedingungen

Essai de performances des concentrateurs photovoltaïques (CPV) - Partie 1: Conditions normales

La CEI 62670-1:2013 définit les conditions normales pour déterminer la puissance produite par les systèmes photovoltaïques à concentration et leurs sous-composants photovoltaïques. L'objet est de définir un ensemble cohérent de conditions, de sorte que les rapports de puissance notés sur les fiches techniques et les plaques signalétiques aient une base de référence. Deux ensembles de conditions sont inclus pour caractériser: a) les conditions de fonctionnement, et b) les conditions d'essais.

Preskušanje zmogljivosti fotonapetostnega koncentratorja - 1. del: Standardni pogoji (IEC 62670-1:2013)

Standard EN IEC 62670-1 določa standardne pogoje za oceno moči, ki jo proizvedejo sistemi fotonapetostnih koncentratorjev in njihove fotonapetostne podkomponente. Cilj tega dela standarda IEC 62670 je določiti skladen sklop pogojev, da bodo imele nazivne moči na tehničnih listih in napisnih ploščicah standardno podlago. Dva sklopa pogojev sta namenjena opredelitvi: a) delovnih pogojev, ki predstavljajo zmogljivost na soncu glede na splošno izmerjene meteorološke pogoje, in b) preskusnih pogojev, ki predstavljajo zmogljivost, ko je modul v preprosto ponovljivem okolju.

General Information

Status
Published
Publication Date
22-May-2014
Withdrawal Date
29-Oct-2016
ICS
27.160 - Solar energy engineering
Technical Committee
CLC/TC 82 - Solar photovoltaic energy systems
Drafting Committee
IEC/TC 82 - IEC_TC_82
Current Stage
6060 - Document made available - Publishing
Start Date
23-May-2014
Completion Date
23-May-2014
Ref Project
SIST EN 62670-1:2014 - Concentrator photovoltaic (CPV) performance testing - Part 1: Standard conditions

Buy Standard

EN 62670-1:2014EN 62670-1:2014
PreviousNext
Standard
EN 62670-1:2014
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62670-1:2014
01-september-2014
Preskušanje zmogljivosti fotonapetostnega koncentratorja - 1. del: Standardni
pogoji (IEC 62670-1:2013)
Concentrator photovoltaic (CPV) performance testing - Part 1: Standard conditions
Essai de performances des concentrateurs photovoltaïques (CPV) - Partie 1: Conditions
normales
Ta slovenski standard je istoveten z: EN 62670-1:2014
ICS:
27.160 6RQþQDHQHUJLMD Solar energy engineering
SIST EN 62670-1:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62670-1:2014

---------------------- Page: 2 ----------------------

SIST EN 62670-1:2014


EUROPEAN STANDARD EN 62670-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2014
ICS 27.160

English Version
Photovoltaic concentrators (CPV) - Performance testing - Part 1:
Standard conditions
(IEC 62670-1:2013)
Essai de performances des concentrateurs photovoltaïques Konzentrator-Photovoltaik (CPV)-Leistungsmessung - Part
(CPV) - Partie 1: Conditions normales 1: Standardprüfbedingungen
(CEI 62670-1:2013) (IEC 62670-1:2013)
This European Standard was approved by CENELEC on 2013-10-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62670-1:2014 E

---------------------- Page: 3 ----------------------

SIST EN 62670-1:2014
EN 62670-1:2014 - 2 -
Foreword
The text of document 82/734/CDV, future edition 1 of IEC 62670-1, prepared by IEC/TC 82 "Solar
photovoltaic energy systems" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62670-1:2014.
The following dates are fixed:
(dop) 2014-11-23
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-10-30
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 62670-1:2013 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 62670-1:2014
- 3 - EN 62670-1:2014

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year
IEC 60904-3 2008 Photovoltaic devices -- Part 3: EN 60904-3 2008
Measurement principles for terrestrial
photovoltaic (PV) solar devices with
reference spectral irradiance data

---------------------- Page: 5 ----------------------

SIST EN 62670-1:2014

---------------------- Page: 6 ----------------------

SIST EN 62670-1:2014



IEC 62670-1

®


Edition 1.0 2013-09




IN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62788-2-1:2023(Main)
Measurement procedures for materials used in photovoltaic modules - Part 2-1: Polymeric materials - Frontsheet and backsheet - Safety requirements
SIST EN IEC 62788-2-1:2024

This document specifies the safety requirements for flexible polymeric frontsheet and backsheet constructions, which are intended for use as relied upon insulation in photovoltaic (PV) modules. In accordance with the corresponding safety requirements in IEC 61730-1 on the PV module level, the test methods and specifications in this document define the specific requirements of the polymeric frontsheet or backsheet constructions on the component level and cover mechanical, electrical, visual and thermal characterization in an unexposed state and/or after ageing. A polymeric frontsheet and backsheet must pass the requirements in this standard for a PV module to pass the design requirements of IEC 61730-1. Compliance with the safety requirements for a frontsheet or backsheet on the component level does not replace the need for a safety qualification of the complete PV module, in which the frontsheet or backsheet is integrated. The appropriate requirements for testing and qualification on the PV module level are defined in IEC 61730-1 (or IEC TS 62915 in case of retesting) and IEC 61215-1, with test methods provided by IEC 61730-2 and IEC 61215-2, respectively.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60904-2:2023(Main)
Photovoltaic devices - Part 2: Requirements for photovoltaic reference devices
SIST EN IEC 60904-2:2024

IEC 60904-2:2023 gives requirements for the classification, selection, packaging, marking, calibration and care of photovoltaic reference devices. This document applies to photovoltaic (PV) reference devices that are used to measure the irradiance of natural or simulated sunlight for the purpose of quantifying the electrical performance of photovoltaic devices (cells, modules and arrays). It does not cover photovoltaic reference devices for use under concentrated sunlight. This fourth edition cancels and replaces the third edition published in 2015. This edition includes the following significant technical changes with respect to the previous edition: a) added calibration procedures for calibrating PV devices at maximum power by extending the respective Clauses 12 and 13; b) revised requirements for mandatory measurement of spectral responsivity, temperature coefficients and linearity, depending on usage and allowing some measurements on equivalent devices; c) revised requirements for built-in shunt resistor; d) added requirements for traceability of calibration explicitly.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63027:2023(Main)
Photovoltaic power systems - DC arc detection and interruption
SIST EN IEC 63027:2023

IEC 63027:2023 applies to equipment used for the detection and optionally the interruption of electric DC arcs in photovoltaic (PV) system circuits. The document covers test procedures for the detection of series arcs within PV circuits, and the response times of equipment employed to interrupt the arcs. The document defines reference scenarios according to which the testing is conducted. This document covers equipment connected to systems not exceeding a maximum PV source circuit voltage of 1 500 V DC. This document provides requirements and testing procedures for arc-fault protection devices used in PV systems to reduce the risk of igniting an electrical fire.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60904-5:2011/A1:2022(Amendment)
Photovoltaic devices - Part 5: Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method
SIST EN 60904-5:2011/A1:2023

This part of IEC 60904 describes the preferred method for determining the equivalent cell
temperature (ECT) of PV devices (cells, modules and arrays of one type of module), for the
purposes of comparing their thermal characteristics, determining NOCT (nominal operating cell
temperature) or alternatively NMOT (nominal module operating temperature), and translating
measured I-V characteristics to other temperatures.

  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62109-3:2022(Main)
Safety of power converters for use in photovoltaic power systems - Part 3: Particular requirements for electronic devices in combination with photovoltaic elements
SIST EN IEC 62109-3:2023

IEC 62109-3:2020 covers the particular safety requirements for electronic elements that are mechanically and/or electrically incorporated with photovoltaic (PV) modules or systems. Mechanically and/or electrically incorporated means that the whole combination of electronic device with the photovoltaic element is sold as one product. Nevertheless, tests provided in this document may also be used to evaluate compatibility of PV modules and electronic devices that are sold separately and are intended to be installed close to each other. The purpose of the requirements of this document is to provide additional safety-related testing requirements for the following types of integrated electronics, collectively referred to as module integrated equipment (MIE): a) Type A MIE where the PV element can be evaluated as a PV module according to IEC 61730-1 and IEC 61730‑2 independently from the electronic element; b) Type B MIE where the PV element cannot be evaluated as a PV module according to IEC 61730-1 and IEC 61730-2 independently from the electronic element.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62759-1:2022(Main)
Photovoltaic (PV) modules - Transportation testing - Part 1: Transportation and shipping of module package units
SIST EN IEC 62759-1:2022

Photovoltaic (PV) modules are electrical devices intended for continuous outdoor exposure during their lifetime. Existing type approval standards do not consider mechanical stresses that may occur during transportation to the PV installation destination. This part of IEC 62759 describes methods for the simulation of transportation of complete package units of modules and combined subsequent environmental impacts. This standard is designed so that its test sequence can co-ordinate with those of IEC 61215 so that a single set of samples may be used to perform both the transportation simulation and performance evaluation of a photovoltaic module design.This standard applies to flat plate photovoltaic modules.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62108:2022(Main)
Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval
SIST EN IEC 62108:2022

This International Standard specifies the minimum requirements for the design qualification and type approval of concentrator photovoltaic (CPV) modules and assemblies suitable for long-term operation in general open-air climates as defined in IEC 60721-2-1. The test sequence is partially based on that specified in IEC 61215-1 for the design qualification and type approval of flat-plate terrestrial crystalline silicon PV modules. However, some changes have been made to account for the special features of CPV receivers and modules, particularly with regard to the separation of on-site and in-lab tests, effects of tracking alignment, high current density, and rapid temperature changes, which have resulted in the formulation of some new test procedures or new requirements. The object of this test standard is to determine the electrical, mechanical, and thermal characteristics of the CPV modules and assemblies and to show, as far as possible within reasonable constraints of cost and time, that the CPV modules and assemblies are capable of withstanding prolonged exposure in climates described in the scope. The actual life of CPV modules and assemblies so qualified will depend on their design, production, environment, and the conditions under which they are operated. This standard shall be used in conjunction with the retest guidelines described in Annex B.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61215-1-4:2021/A1:2022(Amendment)
Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testing of thin-film Cu(In,GA)(S,Se)2 based photovoltaic (PV) modules
SIST EN IEC 61215-1-4:2021/A1:2022
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61215-1-3:2021/A1:2022(Amendment)
Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
SIST EN IEC 61215-1-3:2021/A1:2022
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61215-1-2:2021/A1:2022(Amendment)
Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules
SIST EN IEC 61215-1-2:2021/A1:2022

No scope available

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day