EN 60793-2:2012
(Main)Optical fibres - Part 2: Product specifications - General
Optical fibres - Part 2: Product specifications - General
IEC 60793-2:2011 contains the general specifications for both multimode and single-mode optical fibres. Sectional specifications for each of the four categories multimode class: A1, A2, A3, and A4 contain requirements specific to each category. Sectional specifications for each of the two single-mode classes, B and C, contain requirements common to each class. Each sectional specification includes family specifications (in normative annexes) that contain requirements for the applicable category or sub-categories. These sub-categories are distinguished on the basis of different fibre types or applications. The requirements of this standard apply to all classes. This seventh edition cancels and replaces the sixth edition published in 2007. This modification has been necessary because of the addition of new fibre categories to IEC 60793-2-10 and IEC 60793-2-50.
This publication is to be read in conjunction with IEC 60793-1 series.
Lichtwellenleiter - Teil 2: Produktspezifikationen - Allgemeines
Fibres optiques - Partie 2: Spécifications de produits - Généralités
La CEI 60793-2:2011 contient les spécifications générales applicables à la fois aux fibres optiques unimodales et multimodales. Les spécifications intermédiaires pour chacune des catégories des quatre classes multimodales: A1, A2, A3 et A4 contiennent les exigences spécifiques à chaque catégorie. Les spécifications intermédiaires pour chacune des deux classes unimodales, B et C, contiennent les exigences communes à chaque classe. Chaque spécification intermédiaire inclut des spécifications de famille (dans les annexes normatives) qui contiennent des exigences pour la catégorie ou les sous-catégories applicables. La distinction entre ces différentes sous-catégories se fonde sur les différents types de fibres ou les différentes applications. Les exigences de la présente norme s'appliquent à toutes les classes. Cette septième édition annule et remplace la sixième édition publiée en 2007. Cette modification a été rendue nécessaire par l'ajout de nouvelles catégories de fibres dans la CEI 60793-2-10 et la CEI 60793-2-50.
Cette publication doit être lue conjointement avec la série CEI 60793-1.
Optična vlakna - 2. del: Specifikacije izdelka - Splošno (IEC 60793-2:2011)
Ta del standarda IEC 60793 zajema splošne specifikacije za večrodna in enorodna optična vlakna. Področne specifikacije za vsako od štirih kategorij večrodnega razreda: A1, A2, A3 in A4 vključujejo zahteve, ki so značilne za vsako kategorijo. Področne specifikacije za oba enorodna razreda, tj. B in C, vsebujejo zahteve, ki so skupne obema razredoma. Vsaka področna specifikacija zajema skupinske specifikacije (v normativnih dodatkih), ki vključujejo zahteve za ustrezno kategorijo ali podkategorije. Te podkategorije se razlikujejo glede na različne vrste ali načine uporabe vlaken. Zahteve tega standarda se uporabljajo za vse razrede. Vsaka področna specifikacija vključuje zahteve, ki so skupne vsem skupinskim specifikacijam v njenem okviru. Te skupne zahteve so za lažje sklicevanje kopirane v skupinsko specifikacijo. Preskusne ali merilne metode so opredeljene za vsako navedeno lastnost. Kadar je to mogoče, se te definicije sklicujejo na standard IEC, sicer je preskusna ali merilna metoda opisana v ustrezni področni specifikaciji. V spodnji preglednici so opredeljene področne specifikacije. Ustrezne skupinske specifikacije so opredeljene v okviru področnih specifikacij kot normativni dodatki. Dodatka A in B povzemata obstoječe specifikacije vlaken.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60793-2:2012
01-april-2012
1DGRPHãþD
SIST EN 60793-2:2008
2SWLþQDYODNQDGHO 6SHFLILNDFLMHL]GHOND6SORãQR ,(&
Optical fibres - Part 2: Product specifications - General (IEC 60793-2:2011)
Lichtwellenleiter - Teil 2: Produktspezifikationen - Allgemeines (IEC 60793-2:2011)
Fibres optiques - Partie 2: Spécifications de produits - Généralités (CEI 60793-2:2011)
Ta slovenski standard je istoveten z: EN 60793-2:2012
ICS:
33.180.10 2SWLþQD YODNQDLQNDEOL Fibres and cables
SIST EN 60793-2:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60793-2:2012
---------------------- Page: 2 ----------------------
SIST EN 60793-2:2012
EUROPEAN STANDARD
EN 60793-2
NORME EUROPÉENNE
February 2012
EUROPÄISCHE NORM
ICS 33.180.10 Supersedes EN 60793-2:2008
English version
Optical fibres -
Part 2: Product specifications -
General
(IEC 60793-2:2011)
Fibres optiques - Lichtwellenleiter -
Partie 2: Spécifications de produits - Teil 2: Produktspezifikationen -
Généralités Allgemeines
(CEI 60793-2:2011) (IEC 60793-2:2011)
This European Standard was approved by CENELEC on 2012-01-02. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60793-2:2012 E
---------------------- Page: 3 ----------------------
SIST EN 60793-2:2012
EN 60793-2:2012 - 2 -
Foreword
The text of document 86A/1384/CDV, future edition 7 of IEC 60793-2, prepared by SC 86A, "Fibres and
cables", of IEC/TC 86, "Fibre optics" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60793-2:2012.
The following dates are fixed:
(dop) 2012-10-02
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-01-02
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60793-2:2008.
This modification has been necessary because of the addition of new fibre categories to EN 60793-2-10
and EN 60793-2-50.
Document ID Fibre category
60793-2-10 A1
60793-2-20 A2
60793-2-30 A3
60793-2-40 A4
60793-2-50 B (all)
60793-2-60 C
This standard is to be used in conjunction with EN 60793-1 series.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 60793-2:2011 was approved by CENELEC as a European
Standard without any modification.
---------------------- Page: 4 ----------------------
SIST EN 60793-2:2012
- 3 - EN 60793-2:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60050-731 1991 International Electrotechnical Vocabulary - -
+ corr. July 1992 (IEV) -
Chapter 731: Optical fi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.