EN 61169-47:2015

Radio-frequency connectors - Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick)

IEC 61169-47:2015(E), which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick). It describes the interface dimensions with gauging information, electrical and mechanical performance including the mandatory tests selected from IEC 61169-1:2013, applicable to all DS relating to type F-Quick connectors. This specification indicates the recommended performance characteristics to be considered when writing a DS and covers test schedules and inspection requirements. This second edition cancels and replaces the first edition published in 2012. It constitutes a technical revision. The main changes are listed below: - Subclause 3.2 has been updated to better define gauging. - Table 2 has been updated for insertion and removal forces. - Clause 4 has been updated to refer to the new edition of IEC 61169-1.

Hochfrequenzsteckverbinder - Teil 47: Rahmenspezifikation für koaxiale Hochfrequenzsteckverbinder mit Klemmkupplung, vorzugsweise für den Einsatz in 75-Ω-Kabelnetzen (Typ F-Quick)

Connecteurs pour fréquences radioélectriques - Partie 47: Spécification intermédiaire relative aux connecteurs coaxiaux pour fréquences radioélectriques avec accouplement par serrage, spécifiquement utilisés dans les réseaux câblés 75 Ω (type F-Quick)

L'IEC 61169-47:2015, qui est une spécification intermédiaire (SI), fournit des informations et des règles en vue de l'établissement de spécifications particulières (SP) relatives aux connecteurs coaxiaux pour fréquences radioélectriques avec couplage par bride, typiquement utilisés dans des réseaux câblés 75 Ω (type F-Quick). Elle décrit les dimensions d'interface ainsi que les informations relatives au calibrage, les performances électriques et mécaniques, y compris les essais obligatoires issus de l'IEC 61169-1:2013, applicables à toutes les spécifications particulières ayant trait aux connecteurs de type F-Quick. La présente spécification indique les caractéristiques de performance recommandées à prendre en compte pour la rédaction d’une spécification particulière et elle couvre les programmes d'essais et les exigences de contrôle. Cette deuxième édition annule et remplace la première édition parue en 2012. Cette édition constitue une révision technique. Les modifications majeures sont présentées ci-après: - Le paragraphe 3.2 a été mis à jour pour mieux définir le calibrage. - Le Tableau 2 a été mis à jour avec des forces d'insertion et d'extraction. - L'Article 4 a été mis à jour pour faire référence à la nouvelle édition de l'IEC 61169-1.

Radiofrekvenčni konektorji - 47. del: Področna specifikacija za radiofrekvenčne koaksialne konektorje z zaskočnim spajanjem, tipične za uporabo v 75-ohmskih kabelskih omrežjih (vrste F-Quick) (IEC 61169-47:2014)

Ta del standarda IEC 61169, ki je področna specifikacija (SS), podaja informacije in določa pravila za pripravo podrobnih specifikacij (DS) za radiofrekvenčne koaksialne konektorje z zaskočnim spajanjem, običajno za uporabo v 75-ohmskih kabelskih omrežjih (vrste F-Quick).
Dimenzije vmesnikov opisuje z merjenjem informacij, električne in mehanske zmogljivosti, skupaj z obveznimi preskusi, izbranimi iz standarda IEC 61169-1:2013, ki se uporabljajo za vse podrobne specifikacije v zvezi s konektorji vrste F-Quick.
Ta specifikacija določa priporočene lastnosti, ki jih je treba upoštevati pri sestavljanju podrobnih specifikacij, ter zajema urnike preskusov in zahteve za pregled.
OPOMBA: Ta vmesnik se običajno uporablja za notranje povezave, ki se preprosto odklopijo in znova priklopijo. Običajno se uporabljajo za koaksialne sprejemne vode vrste F ali koaksialne prevezovalne kable vrste F. Vmesnik se lahko imenuje tudi natični konektor. Prednost ima uporaba fiksnih konektorjev (z navojem) vrste F v skladu s standardom IEC 61169-24:2009.

General Information

• Status: Published
• Publication Date: 09-Jul-2015
• Withdrawal Date: 03-May-2018
• ICS: 33.120.30 - RF connectors
• Technical Committee: CLC/SR 46F - RF and microwave passive components
• Drafting Committee: IEC/SC 46F - IEC_SC_46F
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 10-Jul-2015
• Completion Date: 10-Jul-2015
• Ref Project: SIST EN 61169-47:2015 - Radio-frequency connectors - Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick) (IEC 61169-47:2014)

Relations

• Replaces: EN 61169-47:2012 - Radio-frequency connectors - Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick)
• Effective Date: 25-Jun-2014

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2015
1DGRPHãþD
SIST EN 61169-47:2013
5DGLRIUHNYHQþQLNRQHNWRUMLGHO3RGURþQDVSHFLILNDFLMD]DUDGLRIUHNYHQþQH
NRDNVLDOQHNRQHNWRUMH]]DVNRþQLPVSDMDQMHPWLSLþQH]DXSRUDERYRKPVNLK
NDEHOVNLKRPUHåMLKYUVWH)4XLFN,(&
5DGLRIUHTXHQF\FRQQHFWRUV3DUW6HFWLRQDOVSHFLILFDWLRQIRUUDGLRIUHTXHQF\FRD[LDO
FRQQHFWRUVZLWKFODPSFRXSOLQJW\SLFDOO\IRUXVHLQȍFDEOHQHWZRUNVW\SH)4XLFN
,(&
+RFKIUHTXHQ]VWHFNYHUELQGHU7HLO5DKPHQVSH]LILNDWLRQ.RD[LDOH
+RFKIUHTXHQ]VWHFNYHUELQGHUPLW.OHPPNXSSOXQJYRU]XJVZHLVHIUGHQ(LQVDW]LQŸ
.DEHOQHW]HQ7\S)4XLFN,(&
&RQQHFWHXUVSRXUIUpTXHQFHVUDGLRpOHFWULTXHV3DUWLH6SpFLILFDWLRQLQWHUPpGLDLUH
UHODWLYHVDX[FRQQHFWHXUVFRD[LDX[SRXUIUpTXHQFHVUDGLRpOHFWULTXHVDYHFFRXSODJHSDU
EULGHVSpFLILTXHPHQWXWLOLVpVGDQVOHVUpVHDX[FkEOpVŸW\SH)4XLFN,(&

Ta slovenski standard je istoveten z: EN 61169-47:2015
ICS:
33.120.30 5DGLRIUHNYHQþQLNRQHNWRUML R.F. connectors
5)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61169-47

NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2015
ICS 33.120.30 Supersedes EN 61169-47:2012
English Version
Radio-frequency connectors - Part 47: Sectional specification for
radio-frequency coaxial connectors with clamp coupling, typically
for use in 75 Ω cable networks (type F-Quick)
(IEC 61169-47:2015)
Connecteurs pour fréquences radioélectriques -  Hochfrequenzsteckverbinder - Teil 47: Rahmenspezifikation
Partie 47: Spécification intermédiaire relative aux für koaxiale Hochfrequenzsteckverbinder mit
connecteurs coaxiaux pour fréquences radioélectriques Klemmkupplung, vorzugsweise für den Einsatz in 75-Ω-
avec accouplement par serrage, spécifiquement utilisés Kabelnetzen (Typ F-Quick)
dans les réseaux câblés 75 Ω (type F-Quick) (IEC 61169-47:2015)
(IEC 61169-47:2015)
This European Standard was approved by CENELEC on 2015-05-04. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61169-47:2015 E
European foreword
The text of document 46F/272/CDV, future edition 2 of IEC 61169-47, prepared by SC 46F "R.F. and
microwave passive components" of IEC/TC 46 "Cables, wires, waveguides, R.F. connectors, R.F. and
microwave passive components and accessories" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 61169-47:2015.

The following dates are fixed:
• latest date by which the document has to be (dop) 2016-02-04
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-05-04
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61169-47:2012.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61169-47:2015 was approved by CENELEC as a European
Standard without any modification.

- 3 - EN 61169-47:2015
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year

IEC 61169-1 2013 Radio-frequency connectors - EN 61169-1 2013
Part 1: Generic specification - General
requirements and measuring methods
IEC 61169-24 2009 Radio-frequency connectors - EN 61169-24 2009
Part 24: Sectional specification - Radio
frequency coaxial connectors with screw
coupling, typically for use in 75 ohm cable
networks (type F)
IEC 62037 Series Passive RF and microwave devices, EN 62037 Series
intermodulation level measurement
IEC 62037-3 -  Passive RF and microwave devices, EN 62037-3 -
intermodulation level measurement -
Part 3: Measurement of passive
intermodulation in coaxial connectors

IEC 61169-47 ®
Edition 2.0 2015-03
INTERNATIONAL
STANDARD
colour
inside
Radio-frequency connectors –
Part 47: Sectional specification for radio-frequency coaxial connectors with

clamp coupling, typically for use in 75 Ω cable networks (type F-Quick)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.120.30 ISBN 978-2-8322-2581-3

– 2 – IEC 61169-47:2015 © IEC 2015

CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references. 6
3 Interface dimensions . 6
3.1 Dimensions . 6
3.1.1 Common dimensions . 6
3.1.2 Example of connector “F-Quick” type male plug with resilient outer
conductor sleeve (indoor) physical dimensions . 7
3.1.3 Example of connector “F-Quick” type male plug with slotted outer
conductor (indoor) physical dimensions . 8
3.1.4 Example of connector “F-Quick” type male plug with slotted outer
conductor and snap ring (indoor) physical dimensions. 8
3.2 Mechanical gauges . 9
4 Quality assessment procedures . 10
4.1 General . 10
4.2 Ratings and characteristics . 10
4.3 Environmental characteristics for outdoor sockets . 12
4.4 Test schedule and inspection requirements. 12
4.4.1 Acceptance tests . 12
4.4.2 Periodic tests . 12
4.5 Procedures for the quality conformance . 14
4.5.1 Quality conformance inspection . 14
4.5.2 Quality conformanceand its maintenance – General procedure. 14
5 Instructions for preparation of detail specifications . 14
5.1 General . 14
5.2 Identification of the component . 14
5.3 Performance . 15
5.4 Marking, ordering information and related matters . 15
5.5 Selection of tests, test conditions and severities . 15
5.6 Blank detail specification pro-forma for type F-QUICK connector . 16
6 Marking . 20
6.1 Marking of component . 20
6.2 Marking and contents of package . 20

Figure 1 – Connector “F-Quick” type male plug: general dimensions . 7
Figure 2 – Example of connector “F-Quick” type male plug with resilient outer
conductor sleeve (indoor) . 8
Figure 3 – Example of connector “F-Quick” type male plug with slotted outer conductor
(indoor) . 8
Figure 4 – Example of connector “F-Quick” type male plug with slotted outer conductor
and snap ring (indoor) . 9
Figure 5 – Mechanical gauge for resilient outer conductor . 9

IEC 61169-47:2015 © IEC 2015 – 3 –
Table 1 – Connector “F” type male plug (indoor) . 7
Table 2 – Ratings and characteristics . 10
Table 3 – Acceptance tests . 12
Table 4 – Periodic tests . 13

– 4 – IEC 61169-47:2015 © IEC 2015
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIO-FREQUENCY CONNECTORS –
Part 47: Sectional specification for radio-frequency coaxial
connectors with clamp coupling, typically for use in
75 Ω cable networks (type F-Quick)

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does n
...