EN 62868:2015
(Main)Organic light emitting diode (OLED) panels for general lighting - Safety requirements
Organic light emitting diode (OLED) panels for general lighting - Safety requirements
IEC 62868:2014 specifies the safety requirements of OLED tiles and panels for use on d.c. supplies up to 120 V or a.c. supplies up to 50 V at 50 Hz or 60 Hz for indoor and similar general lighting purpose.
Organische Licht emittierende Dioden (OLED)-Panels für die Allgemeinbeleuchtung - Sicherheitsanforderungen
Panneaux à diodes électroluminescentes organiques (OLED) destinés à l’éclairage général - Exigences de sécurité
L'IEC 62868:2014 spécifie les exigences de sécurité de dalles et de panneaux OLED destinés à être utilisés avec des alimentations en tension continue jusqu'à 120 V ou avec des alimentations en tension alternative jusqu'à 50 V à 50 Hz ou 60 Hz, destinés à l'éclairage général intérieur ou similaire.
Plošče z organskimi svetlečimi diodami (OLED) za splošno razsvetljavo - Varnostne zahteve (IEC 62868:2014)
Ta mednarodni standard določa varnostne zahteve za ploščice in plošče OLED za uporabo z napajanjem z napetostmi do 120 V pri enosmernem ali do 50 V pri izmeničnem toku s frekvenco 50 ali 60 Hz za namene notranjega in podobnega splošnega osvetljevanja.
OPOMBA 1: V tem trenutku so na voljo le preskusne metode za plošče OLED za enosmerni tok. Ukrepi za plošče OLED za izmenični tok so v obravnavi.
OPOMBA 2: Sestava ploščic in plošč OLED je prikazana na sliki v Dodatku A.
OPOMBA 3: Svetlobni sistem OLED, sestavljen iz plošč ali modulov OLED, je prikazan na sliki v Dodatku D.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2016
3ORãþH]RUJDQVNLPLVYHWOHþLPLGLRGDPL 2/(' ]DVSORãQRUD]VYHWOMDYR
9DUQRVWQH]DKWHYH ,(&
Organic light emitting diode (OLED) panels for general lighting - Safety requirements
(IEC 62868:2014)
Ta slovenski standard je istoveten z: EN 62868:2015
ICS:
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62868
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2015
ICS 29.140.99
English Version
Organic light emitting diode (OLED) panels for general lighting -
Safety requirements
(IEC 62868:2014)
Panneaux à diodes électroluminescentes organiques Organische Licht emittierende Dioden (OLED)-Panels für
(OLED) destinés à l'éclairage général - Exigences de die Allgemeinbeleuchtung - Sicherheitsanforderungen
sécurité (IEC 62868:2014)
(IEC 62868:2014)
This European Standard was approved by CENELEC on 2014-10-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62868:2015 E
European foreword
The text of document 34A/1786/FDIS, future edition 1 of IEC 62868, prepared by IEC/SC 34A
"Lamps" of IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN 62868:2015.
The following dates are fixed:
(dop) 2016-05-06
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2017-10-30
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment
Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).
Endorsement notice
The text of the International Standard IEC 62868:2014 was approved by CENELEC as a European
Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050 series International electrotechnical vocabulary -- - -
Chapter 00: General index
IEC 60068-2-6 2007 Environmental testing -- Part 2-6: Tests - EN 60068-2-6 2008
Test Fc: Vibration (sinusoidal)
IEC 60598-1 - Luminaires -- Part 1: General requirements EN 60598-1 -
and tests
IEC/TR 62854 2014 Sharp edge testing apparatus and test
procedure for lighting equipment – Tests
for sharpness of edge
ISO 4046-4 2002 Paper, board, pulps and related terms - - -
Vocabulary -- Part 4: Paper and board
grades and converted products
IEC 62868 ®
Edition 1.0 2014-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Organic light emitting diode (OLED) panels for general lighting – Safety
requirements
Panneaux à diodes électroluminescentes organiques (OLED) destinés à l’éclairage
général – Exigences de sécurité
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX Q
ICS 29.140.99 ISBN 978-2-8322-1871-6
– 2 – IEC 62868:2014 © IEC 2014
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General . 6
4.1 General requirements . 6
4.2 General test requirements . 7
5 Marking . 7
5.1 Contents and location . 7
5.2 Durability and legibility of marking . 7
6 Construction . 8
6.1 General . 8
6.2 Mechanical strength . 8
6.3 Internal short circuit . 8
6.4 Wireways . 9
6.5 Resistance to dust, solid objects and moisture . 9
7 Mechanical hazard . 9
8 Fault conditions . 9
9 Insulation resistance and electric strength . 10
9.1 Insulation resistance . 10
9.2 Electric strength . 10
10 Thermal stress . 10
11 Creepage distances and clearances . 10
12 Resistance to heat and fire . 10
12.1 Resistance to heat . 10
12.2 Resistance to fire . 10
13 Photobiological safety . 11
14 Terminals . 11
15 Information for luminaire design . 11
Annex A (informative) Construction of OLED panels . 12
Annex B (informative) Information for luminaire design . 14
Annex C (normative) Method of provoking internal short circuit . 15
C.1 Method for an OLED panel with glass substrates . 15
C.2 Method for an OLED panel with flexible plastic substrates . 15
C.3 Other methods . 15
Annex D (informative) Overview of the OLED lighting system consisting of OLED
panel or module . 16
Figure A.1 – Schematic diagram of OLED tile for lighting . 12
Figure A.2 – Schematic diagram of OLED panel (Example 1) for lighting . 12
Figure A.3 – Schematic diagram of OLED panel (Example 2) for lighting . 13
Figure A.4 – Schematic diagram of OLED panel (Example 3) for lighting . 13
Figure D.1 – Schematic diagram of OLED lighting system consisting of OLED panel
or module . 16
Table 1 – Contents and location of marking . 7
IEC 62868:2014 © IEC 2014 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ORGANIC LIGHT EMITTING DIODE (OLED) PANELS
FOR GENERAL LIGHTING – SAFETY REQUIREMENTS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.