Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz

IEC 61076-3-104:2017(E) establishes uniform specifications, type testing requirements for 8 way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz, and used as category 7A connectors in class FA cabling systems specified in ISO/IEC 11801-1. It contains all test methods and sequences, severity and preferred values for dimensions and characteristics. This third edition of IEC 61076-3-104 cancels and replaces the second edition, published in 2006, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - the title has been changed to incorporate transmissions with frequencies up to 2 000 MHz; - the drawings of some styles have been corrected for clarification; - Figures 23 and 24 have been updated; - Figure 3 has been updated to include reference dimensions and dimensional format changes; - the dimensions of Figure 7 have been updated; - the type designation and ordering information has been removed for consistency with the most updated sectional specification; - the test schedule was updated to include appropriate IEC 60512 Test Nos; - the electrical performance requirements have been revised for 2 GHz level and interchangeability information has been added for performance categories.

Steckverbinder für elektrische und elektronische Einrichtungen - Produktanforderungen - Teil 3-104: Bauartspezifikation für geschirmte freie und feste Steckverbinder, 8-polig, für Datenübertragungen bis 2 000 MHz

Connecteurs pour équipements électriques et électroniques - Exigences de produit - Partie 3-104: Spécification particulière pour les fiches et les embases écrantées à 8 voies pour la transmission de données à des fréquences jusqu'à 2 000 MHz

IEC 61076-3-104:2017 établit des spécifications uniformes, des exigences d’essais de type pour les fiches et les embases écrantées à 8 voies pour la transmission de données à des fréquences jusqu’à 2 000 MHz et utilisées comme des connecteurs de catégorie 7A dans les systèmes de câblage de classe FA spécifiés dans l’ISO/IEC 11801-1. Elle contient toutes les méthodes et séquences d’essai, la sévérité et les valeurs préférentielles pour les dimensions et les caractéristiques. Cette troisième édition de l'IEC 61076-3-104 annule et remplace la deuxième édition publiée en 2006 dont elle constitue une révision technique. La présente édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - le titre a été modifié pour intégrer la transmission à des fréquences jusqu'à 2 000 MHz; - les dessins de certains modèles ont été corrigés pour être plus clairs; - les Figures 23 et 24 ont été mises à jour; - la Figure 3 a été mise à jour pour inclure des dimensions de référence et des modifications de format des dimensions; - les dimensions de la Figure 7 ont été mises à jour; - la désignation de type et les informations relatives aux commandes ont été retirées par souci de cohérence avec la version la plus récente de la spécification intermédiaire; - le programme d'essais a été mis à jour pour inclure les numéros d'essai appropriés de l'IEC 60512; - les exigences relatives aux performances électriques ont été révisées pour le niveau 2 GHz; - des informations sur l'interchangeabilité ont été ajoutées pour des catégories de performances.

Konektorji za elektronsko opremo - Zahteve za izdelek - 3-104. del: Podrobna specifikacija za 8-redne, zaslonjene proste in pritrjene konektorje za prenos podatkov s frekvencami do 2000 MHz (IEC 61076-3-104:2017)

Ta del standarda IEC 61076 določa enotne specifikacije in zahteve za tipsko preskušanje za 8-redne, zaslonjene proste in pritrjene konektorje za prenos podatkov s frekvencami do 2000 MHz, ki se uporabljajo kot konektorji kategorije 7A v kabelskih sistemih razreda FA, določenih v standardu ISO/IEC 11801-1. Vsebuje vse preskusne metode in preskusna zaporedja, stopnje ter prednostne vrednosti za mere in lastnosti.

General Information

Status
Published
Publication Date
28-Sep-2017
Withdrawal Date
28-Sep-2020
Technical Committee
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
29-Sep-2017
Completion Date
29-Sep-2017

Relations

Buy Standard

Standard
EN 61076-3-104:2017 - BARVE
English language
89 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61076-3-104:2017
01-november-2017
1DGRPHãþD
SIST EN 61076-3-104:2008
Konektorji za elektronsko opremo - Zahteve za izdelek - 3-104. del: Podrobna
specifikacija za 8-redne, zaslonjene proste in pritrjene konektorje za prenos
podatkov s frekvencami do 2000 MHz (IEC 61076-3-104:2017)
Connectors for electronic equipment - Product requirements - Part 3-104: Detail
specification for 8-way, shielded free and fixed connectors for data transmissions with
frequencies up to 2000 MHz (IEC 61076-3-104:2017)
Ta slovenski standard je istoveten z: EN 61076-3-104:2017
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST EN 61076-3-104:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61076-3-104:2017

---------------------- Page: 2 ----------------------

SIST EN 61076-3-104:2017


EUROPEAN STANDARD EN 61076-3-104

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2017
ICS 33.120.10 Supersedes EN 61076-3-104:2006
English Version
Connectors for electrical and electronic equipment -
Product requirements - Part 3-104: Detail specification
for 8-way, shielded free and fixed connectors
for data transmissions with frequencies up to 2 000 MHz
(IEC 61076-3-104:2017)
Connecteurs pour équipements électriques et électroniques - Steckverbinder für elektrische und elektronische
Exigences de produit - Partie 3-104: Spécification particulière Einrichtungen - Produktanforderungen - Teil 3-104:
pour les fiches et les embases écrantées à 8 voies Bauartspezifikation für geschirmte freie und feste
pour la transmission de données à des fréquences Steckverbinder, 8-polig, für Datenübertragungen
jusqu'à 2 000 MHz bis 2 000 MHz
(IEC 61076-3-104:2017) (IEC 61076-3-104:2017)
This European Standard was approved by CENELEC on 2017-06-26. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61076-3-104:2017 E

---------------------- Page: 3 ----------------------

SIST EN 61076-3-104:2017
EN 61076-3-104:2017
European foreword
The text of document 48B/2560/FDIS, future edition 3 of IEC 61076-3-104, prepared by SC 48B
"Electrical connectors", of IEC/TC 48 "Electrical connectors and mechanical structures for electrical
and electronic equipment" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 61076-3-104:2017.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2018-03-29
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2020-09-29
the document have to be withdrawn

This document supersedes EN 61076-3-104:2006.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61076-3-104:2017 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-2-38 NOTE Harmonized as EN 60068-2-38.
IEC 60512-25-9 NOTE Harmonized as EN 60512-25-9.
IEC 60603-7 NOTE Harmonized as EN 60603-7.
IEC 61196 NOTE Harmonized in EN 61196 series.
2

---------------------- Page: 4 ----------------------

SIST EN 61
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.