Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance

IEC 61754-1:2013 covers general information on the subject of fibre optic connector interfaces. It includes references, definitions and rules for creating and interpreting the standard drawings. This second edition cancels and replaces the first edition, published in 1996, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - general reconsideration of performance requirements; - addition of Figure 1 (Plug, adaptor, and receptacle for a connector examples). Keywords: fibre optic connector interfaces

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 1: Allgemeines und Leitfaden

Dispositifs d'interconnexion et composants passifs à fibres optiques - Interfaces de connecteurs à fibres optiques - Partie 1: Généralités et lignes directrices

La CEI 61754-1:2013 traite des informations générales concernant les interfaces de connecteurs à fibres optiques. Elle comprend des références, des définitions et des règles relatives à la création et à l'interprétation des dessins normalisés. Cette deuxième édition annule et remplace la première édition, parue en 1996, dont elle constitue une révision technique. Cette édition inclut les modifications techniques significatives suivantes par rapport à l'édition précédente: - reconsidération générale des exigences de performance; - ajout de la Figure 1 (Exemples de fiche, de raccord et d'embase pour un connecteur). Mots clés: interfaces de connecteurs à fibres optiques

Optični spojni elementi in pasivne komponente - Vmesniki optičnih konektorjev - 1. del: Splošno in navodilo (IEC 61754-1:2013)

Ta del standarda IEC 61754 zajema splošne informacije v zvezi z vmesniki optičnih konektorjev. Zajema sklicevanja, definicije in pravila za ustvarjanje ter razlago standardnih skic.

General Information

Status
Published
Publication Date
28-Nov-2013
Withdrawal Date
23-Sep-2014
Current Stage
6060 - Document made available - Publishing
Start Date
29-Nov-2013
Completion Date
29-Nov-2013

Relations

Buy Standard

Standard
EN 61754-1:2014
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61754-1:2014
01-januar-2014
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH9PHVQLNLRSWLþQLKNRQHNWRUMHY
GHO6SORãQRLQQDYRGLOR ,(&
Fibre optic interconnecting devices and passive components - Fibre optic connector
interfaces - Part 1: General and guidance
Ta slovenski standard je istoveten z: EN 61754-1:2013
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61754-1:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61754-1:2014

---------------------- Page: 2 ----------------------

SIST EN 61754-1:2014

EUROPEAN STANDARD
EN 61754-1

NORME EUROPÉENNE
November 2013
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61754-1:1997


English version


Fibre optic interconnecting devices and passive components -
Fibre optic connector interfaces -
Part 1: General and guidance
(IEC 61754-1:2013)


Dispositifs d'interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Interfaces de connecteurs à fibres Bauteile -
optiques - Steckgesichter von Lichtwellenleiter-
Partie 1: Généralités et lignes directrices Steckverbindern -
(CEI 61754-1:2013) Teil 1: Allgemeines und Leitfaden
(IEC 61754-1:2013)




This European Standard was approved by CENELEC on 2013-09-24. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61754-1:2013 E

---------------------- Page: 3 ----------------------

SIST EN 61754-1:2014
EN 61754-1:2013 - 2 -

Foreword
The text of document 86B/3503/CDV, future edition 2 of IEC 61754-1, prepared by subcommittee 86B
“Fibre optic interconnecting devices and passive components” of IEC/TC 86 "Fibre optics" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61754-1:2013.
The following dates are fixed:
(dop) 2014-06-24
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2014-09-24
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 61754-1:1997.
EN 61754-1:2013 includes the following significant technical changes with respect to EN 61754-
1:1997:
a) general reconsideration of performance requirements;
b) addition of Figure 1.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.


Endorsement notice
The text of the International Standard IEC 61754-1:2013 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:

IEC 61753 Series NOTE Harmonised in EN 61753 series (not modified).
IEC 61931 NOTE Harmonised as EN 61931 (not modified).
ISO 1101 NOTE Harmonised as EN ISO 1101 (not modified).
ISO 2692 NOTE Harmonised as EN ISO 2692 (not modified).
ISO 5458 NOTE Harmonised as EN ISO 5458 (not modified).
ISO 5459 NOTE Harmonised as EN ISO 5459 (not modified).
ISO 7083 NOTE Harmonised as EN ISO 7083 (not modified).

---------------------- Page: 4 ----------------------

SIST EN 61754-1:2014
- 3 - EN 61754-1:2013

Annex ZA
(normative)

Normative references to int
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.