EN IEC 62496-4-1:2019
(Main)Optical circuit boards - Part 4-1: Interface standards - Terminated waveguide OCB assembly using single-row twelve-channel PMT connectors
Optical circuit boards - Part 4-1: Interface standards - Terminated waveguide OCB assembly using single-row twelve-channel PMT connectors
This part of IEC 62496-4 defines the standard interface dimensions for a terminated waveguide optical circuit board (OCB) assembly (referred to simply as assembly) using single-row twelvechannel polymer waveguides for a PMT connector and a waveguide OCB that can be interconnected with a terminated MT ferrule.
Optische Leiterplatten - Teil 4-1: Schnittstellen Standard - Konfektionierter 12-Faser OCB montierter Wellenleiter mit PMT Stecker
Cartes à circuits optiques - Partie 4-1: Normes d'interface - Terminaison d'un ensemble de cartes à circuits optiques à guide d'onde utilisant des connecteurs PMT de douze canaux sur une seule rangée
La présente partie de l’IEC 62496-4 définit les dimensions d’interface normalisées pour la terminaison d'un ensemble de cartes à circuits optiques (OCB1) à guide d'onde (désigné sous la forme abrégée «ensemble») qui utilise des guides d’onde en polymère de douze canaux sur une seule rangée pour un connecteur PMT et une OCB à guide d'onde qui peuvent être interconnectés au moyen d’une férule de type MT équipée.
Plošče z optičnimi vezji - 4-1. del: Standardi za vmesnike - Sestav OCB z valovodom, zaključenim z enovrstičnimi dvanajstkanalnimi PMT-konektorji (IEC 62496-4-1:2019)
Ta del standarda IEC 62496-4 določa standardne dimenzije vmesnika za sestav OCB z valovodom (imenovan preprosto sestav), zaključenim z enorednimi dvanajstkanalnimi PMT konektorji in OCB z valovodom, ki ga je mogoče povezati z zaključeno MT-tulko.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62496-4-1:2019
01-julij-2019
Plošče z optičnimi vezji - 4-1. del: Standardi za vmesnike - Sestav OCB z
valovodom, zaključenim z enorednimi dvanajstkanalnimi PMT konektorji (IEC
62496-4-1:2019)
Optical circuit boards - Part 4-1: Interface standards - Terminated waveguide OCB
assembly using single-row twelve-channel PMT connectors (IEC 62496-4-1:2019)
Optische Leiterplatten - Teil 4-1: Schnittstellen Standard - Konfektionierter 12-Faser OCB
montierter Wellenleiter mit PMT Stecker (IEC 62496-4-1:2019)
Cartes a circuits optiques - Partie 4-1: Normes d'interface - Terminaison d'un ensemble
de cartes à circuits optiques à guide d'onde utilisant des connecteurs PMT de douze
canaux sur une seule rangée (IEC 62496-4-1:2019)
Ta slovenski standard je istoveten z: EN IEC 62496-4-1:2019
ICS:
31.180 Tiskana vezja (TIV) in tiskane Printed circuits and boards
plošče
33.180.01 Sistemi z optičnimi vlakni na Fibre optic systems in
splošno general
SIST EN IEC 62496-4-1:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62496-4-1:2019
---------------------- Page: 2 ----------------------
SIST EN IEC 62496-4-1:2019
EUROPEAN STANDARD EN IEC 62496-4-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2019
ICS 33.180.01
English Version
Optical circuit boards - Part 4-1: Interface standards -
Terminated waveguide OCB assembly using single-row twelve-
channel PMT connectors
(IEC 62496-4-1:2019)
Cartes a circuits optiques - Partie 4-1: Normes d'interface - Optische Leiterplatten - Teil 4-1: Schnittstellen Standard -
Terminaison d'un ensemble de cartes à circuits optiques à Konfektionierter 12-Faser OCB montierter Wellenleiter mit
guide d'onde utilisant des connecteurs PMT de douze PMT Stecker
canaux sur une seule rangée (IEC 62496-4-1:2019)
(IEC 62496-4-1:2019)
This European Standard was approved by CENELEC on 2019-03-12. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62496-4-1:2019 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62496-4-1:2019
EN IEC 62496-4-1:2019 (E)
European foreword
The text of document 86/547/FDIS, future edition 1 of IEC 62496-4-1, prepared by IEC/TC 86 "Fibre
optics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 62496-4-1:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-12-12
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-03-12
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62496-4-1:2019 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61754-5 NOTE Harmonized as EN 61754-5
2
---------------------- Page: 4 ----------------------
SIST EN IEC 62496-4-1:2019
IEC 62496-4-1
®
Edition 1.0 2019-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Optical circuit boards –
Part 4-1: Interface standa
...
SLOVENSKI STANDARD
SIST EN IEC 62496-4-1:2019
01-julij-2019
Plošče z optičnimi vezji - 4-1. del: Standardi za vmesnike - Sestav OCB z
valovodom, zaključenim z enovrstičnimi dvanajstkanalnimi PMT-konektorji (IEC
62496-4-1:2019)
Optical circuit boards - Part 4-1: Interface standards - Terminated waveguide OCB
assembly using single-row twelve-channel PMT connectors (IEC 62496-4-1:2019)
Optische Leiterplatten - Teil 4-1: Schnittstellen Standard - Konfektionierter 12-Faser OCB
montierter Wellenleiter mit PMT Stecker (IEC 62496-4-1:2019)
Cartes a circuits optiques - Partie 4-1: Normes d'interface - Terminaison d'un ensemble
de cartes à circuits optiques à guide d'onde utilisant des connecteurs PMT de douze
canaux sur une seule rangée (IEC 62496-4-1:2019)
Ta slovenski standard je istoveten z: EN IEC 62496-4-1:2019
ICS:
31.180 Tiskana vezja (TIV) in tiskane Printed circuits and boards
plošče
33.180.01 Sistemi z optičnimi vlakni na Fibre optic systems in
splošno general
SIST EN IEC 62496-4-1:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62496-4-1:2019
---------------------- Page: 2 ----------------------
SIST EN IEC 62496-4-1:2019
EUROPEAN STANDARD EN IEC 62496-4-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2019
ICS 33.180.01
English Version
Optical circuit boards - Part 4-1: Interface standards -
Terminated waveguide OCB assembly using single-row twelve-
channel PMT connectors
(IEC 62496-4-1:2019)
Cartes a circuits optiques - Partie 4-1: Normes d'interface - Optische Leiterplatten - Teil 4-1: Schnittstellen Standard -
Terminaison d'un ensemble de cartes à circuits optiques à Konfektionierter 12-Faser OCB montierter Wellenleiter mit
guide d'onde utilisant des connecteurs PMT de douze PMT Stecker
canaux sur une seule rangée (IEC 62496-4-1:2019)
(IEC 62496-4-1:2019)
This European Standard was approved by CENELEC on 2019-03-12. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62496-4-1:2019 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62496-4-1:2019
EN IEC 62496-4-1:2019 (E)
European foreword
The text of document 86/547/FDIS, future edition 1 of IEC 62496-4-1, prepared by IEC/TC 86 "Fibre
optics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 62496-4-1:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-12-12
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-03-12
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62496-4-1:2019 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61754-5 NOTE Harmonized as EN 61754-5
2
---------------------- Page: 4 ----------------------
SIST EN IEC 62496-4-1:2019
IEC 62496-4-1
®
Edition 1.0 2019-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Optical circuit boards –
Part 4-1: Interface standards –
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.