EN 62129-1:2016
(Main)Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers
Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers
IEC 62129-1:2016 specifies procedures for calibrating an optical spectrum analyzer that is developed for use in fibre-optic communications and designed to measure the power distribution of an optical spectrum. It does not apply to an optical wavelength meter that measures only centre wavelengths, a Fabry-Perot interferometer or a monochromator that has no display unit. This first edition of IEC 62129-1 cancels and replaces the first edition of IEC 62129, published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - update of term and definitions; - update of calibration conditions; - calculation change of uncertainties related to wavelength temperature dependence, power linearity, power level temperature dependence; - move of Annex E to the bibliography. Keywords: calibrating an optical spectrum analyser
Kalibrierung von Messgeräten für die Wellenlänge/optische Frequenz - Teil 1: Optische Spektrumanalysatoren
Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 1: Analyseurs de spectre optique
L'IEC 62129-1:2016 spécifie des procédures pour étalonner un analyseur de spectre optique développé pour être utilisé dans les communications par fibres optiques et conçu pour mesurer la distribution en puissance d'un spectre optique. Elle ne s'applique pas aux appareils de mesure de longueurs d'onde optique mesurant uniquement les longueurs d'onde centrales, aux interféromètres de type Fabry-Perot, ni aux monochromateurs ne possédant pas d'unité d'affichage. Cette première édition de l'IEC 62129-1 annule et remplace la première édition de l'IEC 62129 parue en 2006. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - la mise à jour des termes et définitions; - la mise à jour des conditions d'étalonnage; - la modification du calcul des incertitudes liées à la dépendance de la longueur d'onde vis-à-vis de la température, liées à la linéarité de la puissance, et liées à la dépendance du niveau de puissance vis-à-vis de la température; - l'Annexe E a été déplacée dans la bibliographie. Mots clés : étalonner un analyseur de spectre optique
Umerjanje valovno-dolžinskih/optično-frekvenčnih merilnih instrumentov - 1. del: Analizatorji optičnega spektra (IEC 62129-1:2016)
Ta del standarda IEC 62129 določa postopke za umerjanje analizatorja optičnega spektra, razvitega za uporabo v komunikacijah po optičnih vlaknih in zasnovanega za merjenje distribucije električne energije optičnega spektra. Ne uporablja se za optični merilnik valovnih dolžin, ki meri le osrednje valovne dolžine, Fabry-Perotov interferometer ali monokromator brez prikazne enote.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2017
1DGRPHãþD
SIST EN 62129:2006
8PHUMDQMHYDORYQRGROåLQVNLKRSWLþQRIUHNYHQþQLKPHULOQLKLQVWUXPHQWRYGHO
$QDOL]DWRUMLRSWLþQHJDVSHNWUD ,(&
Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical
spectrum analyzers (IEC 62129-1:2016)
Ta slovenski standard je istoveten z: EN 62129-1:2016
ICS:
17.180.30 2SWLþQLPHULOQLLQVWUXPHQWL Optical measuring
instruments
33.180.01 6LVWHPL]RSWLþQLPLYODNQLQD Fibre optic systems in
VSORãQR general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62129-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2016
ICS 33.140; 33.180.01 Supersedes EN 62129:2006
English Version
Calibration of wavelength/optical frequency measurement
instruments - Part 1: Optical spectrum analyzers
(IEC 62129-1:2016)
Étalonnage des appareils de mesure de longueur Kalibrierung von Messgeräten für die Wellenlänge/optische
d'onde/appareil de mesure de la fréquence optique - Frequenz - Teil 1: Optische Spektrumanalysatoren
Partie 1: Analyseurs de spectre optique (IEC 62129-1:2016)
(IEC 62129-1:2016)
This European Standard was approved by CENELEC on 2016-02-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62129-1:2016 E
European foreword
The text of document 86/477/CDV, future edition 1 of IEC 62129-1, prepared by IEC/TC 86 "Fibre
optics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
(dop) 2016-12-03
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2019-06-03
• latest date by which the national standards conflicting with
the document have to be withdrawn
This document supersedes EN 62129:2006.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62129-1:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60793-2-50 NOTE Harmonized as EN 60793-2-50.
IEC 61315 NOTE Harmonized as EN 61315.
IEC 62129-2 NOTE Harmonized as EN 62129-2.
IEC 62522 NOTE Harmonized as EN 62522.
IEC 60359:2001 NOTE Harmonized as EN 60359:2002 (not modified).
IEC 61290-3-1 NOTE Harmonized as EN 61290-3-1.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-731 - International Electrotechnical - -
Vocabulary -
Chapter 731: Optical fibre
communication
IEC 60793-2 series Optical fibres - EN 60793-2 series
Part 2: Product specifications
IEC 60825-1 - Safety of laser products - EN 60825-1 -
Part 1: Equipment classification and
requirements
ISO/IEC 17025 - General requirements for the EN ISO/IEC 17025 -
competence of testing and calibration
laboratories
ISO/IEC Guide 98-3 2008 Uncertainty of measurement - - -
Part 3: Guide to the expression of
uncertainty in measurement
(GUM:1995)
IEC 62129-1 ®
Edition 1.0 2016-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Calibration of wavelength/optical frequency measurement instruments –
Part 1: Optical spectrum analyzers
Étalonnage des appareils de mesure de longueur d’onde/appareil de mesure de
la fréquence optique –
Partie 1: Analyseurs de spectre optique
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.140; 33.180.01 ISBN 978-2-8322-3123-4
– 2 – IEC 62129-1:2016 © IEC 2016
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Preparation for calibration . 12
4.1 Organization . 12
4.2 Traceability . 12
4.3 Preparation . 12
4.4 Reference calibration conditions . 12
5 Wavelength calibration . 13
5.1 Overview. 13
5.2 Wavelength calibration under reference conditions . 13
5.2.1 General . 13
5.2.2 Equipment for wavelength calibration under reference conditions . 14
5.2.3 Procedure for wavelength calibration under reference conditions . 14
5.2.4 Calculations of wavelength uncertainty under reference conditions . 14
5.3 Wavelength calibration for operating conditions . 15
5.3.1 General . 15
5.3.2 Wavelength dependence . 15
5.3.3 Temperature dependence . 16
5.4 Calculation of expanded uncertainty . 17
6 Power level calibration . 18
6.1 Overview. 18
6.2 Power level calibration under reference conditions . 19
6.2.1 General . 19
6.2.2 Equipment for power level calibration under reference conditions . 19
6.2.3 Procedure for power level calibration under reference conditions . 19
6.2.4 Calculation of power level uncertainty under reference conditions . 20
6.3 Power level calibration for operating conditions . 21
6.3.1 General . 21
6.3.2 Wavelength dependence . 21
6.3.3 Polarization dependence . 23
6.3.4 Linearity . 24
6.3.5 Temperature dependence . 26
6.4 Calculation of expanded uncertainty . 27
7 Resolution bandwidth (spectral resolution) test . 28
7.1 Overview. 28
7.2 Resolution bandwidth (spectral resolution) test . 28
7.2.1 General . 28
7.2.2 Equipment for resolution bandwidth (spectral resolution) test . 28
7.2.3 Test procedure for resolution bandwidth (spectral resolution) . 29
8 Documentation . 30
8.1 Measurement conditions . 30
8.2 Measurement data and uncertainty . 30
Annex A (normative) Mathematical basis . 31
IEC 62129-1:2016 IEC 2016 – 3 –
A.1 General . 31
A.2 Type A evaluation of uncertainty . 31
A.3 Type B evaluation of uncertainty . 32
A.4 Determining the combined standard uncertainty . 32
A.5 Reporting . 33
Annex B (informative) Examples of calculation of calibration uncertainty . 34
B.1 General . 34
B.2 Wavelength calibration . 34
B.2.1 Uncertainty under reference conditions: u . 34
D
λ
ref
B.2.2 Uncertainty under operating conditions . 35
B.2.3 Expanded uncertainty calculation . 36
B.3 Power level calibration . 37
B.3.1 Uncertainty under reference conditions: u . 37
D
Pref
B.3.2 Uncertainty under operating conditions . 38
B.3.3 Expanded uncertainty calculation . 41
Annex C (informative) Using the calibration results . 42
C.1 General . 42
C.1.1 Overview . 42
C.1.2 Parameters . 42
C.1.3 Restrictions . 42
C.2 Additive corrections . 42
C.2.1 Parameters .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.