EN IEC 63032:2018
(Main)Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specification
Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specification
IEC 63032:2018 applies to the family of tuneable bandpass filters. These components can modify the spectral intensity distribution in order to select some wavelengths and inhibit others. They can be categorized into the following: - wavelength tuneable; - bandwidth tuneable; - wavelength and bandwidth tuneable filter. This document establishes uniform requirements for optical, mechanical and environmental properties. Key words: tuneable bandpass filters
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Abstimmbare LWL-Bandpassfilter - Fachgrundspezifikation
Dispositifs d'interconnexion et composants passifs fibroniques - Filtres fibroniques passe-bande accordables - Spécification générique
IEC 63032:2018 s'applique à la famille des filtres passe-bande accordables. Ces composants peuvent modifier la distribution de l'intensité spectrale afin de sélectionner certaines longueurs d'onde et d'en bloquer d'autres. Ils peuvent être classés dans les catégories suivantes: - filtre accordable en longueur d'onde; - filtre accordable en largeur de bande; - filtre accordable en longueur d'onde et en largeur de bande. Le présent document établit des exigences uniformes relatives aux propriétés optiques, mécaniques et environnementales. Mots clés : filtres passe-bande accordables
Optični spojni elementi in pasivne komponente - Nastavljivi optični pasovno prepustni filtri - Splošna specifikacija (IEC 63032:2018)
Ta dokument se uporablja za družino nastavljivih pasovno prepustnih filtrov. S temi komponentami je mogoče spremeniti distribucijo spektralne intenzitete ter tako izbrati določene valovne dolžine in zavirati druge.
Razdeliti jih je mogoče v naslednje kategorije:
– filtri, nastavljivi po valovni dolžini;
– filtri, nastavljivi po pasovni širini;
– filtri, nastavljivi po valovni dolžini in pasovni širini.
Ta dokument določa enotne zahteve za optične, mehanske in okoljske lastnosti.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 63032:2018
01-oktober-2018
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH1DVWDYOMLYLRSWLþQLSDVRYQR
SUHSXVWQLILOWUL6SORãQDVSHFLILNDFLMD ,(&
Fibre optic interconnecting devices and passive components - Fibre optic tuneable
bandpass filters - Generic specification (IEC 63032:2018)
Ta slovenski standard je istoveten z: EN IEC 63032:2018
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN IEC 63032:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 63032:2018
---------------------- Page: 2 ----------------------
SIST EN IEC 63032:2018
EUROPEAN STANDARD EN IEC 63032
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2018
ICS 33.180.20
English Version
Fibre optic interconnecting devices and passive components -
Fibre optic tuneable bandpass filters - Generic specification
(IEC 63032:2018)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter-Verbindungselemente und passive
fibroniques - Filtres fibroniques passe-bande accordables - Bauteile - Abstimmbare LWL-Bandpassfilter -
Spécification générique Fachgrundspezifikation
(IEC 63032:2018) (IEC 63032:2018)
This European Standard was approved by CENELEC on 2018-06-28. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63032:2018 E
---------------------- Page: 3 ----------------------
SIST EN IEC 63032:2018
EN IEC 63032:2018
European foreword
The text of document 86B/4125/FDIS, future edition 1 of IEC 63032, prepared by SC 86B "Fibre optic
interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 63032:2018.
The following dates are fixed:
(dop) 2019-03-28
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-06-28
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 63032:2018 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60869-1 NOTE Harmonized as EN 60869-1.
IEC 60875-1 NOTE Harmonized as EN 60875-1.
IEC 60876-1 NOTE Harmonized as EN 60876-1.
IEC 61202-1 NOTE Harmonized as EN 61202-1.
IEC 61978-1 NOTE Harmonized as EN 61978-1.
IEC 62074-1 NOTE Harmonized as EN 62074-1.
IEC 62077 NOTE Harmonized as EN 62077.
IEC 62099 NOTE Harmonized as EN 62099.
2
---------------------- Page: 4 ----------------------
SIST EN IEC 63032:2018
EN IEC 63032:2018
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an Internati
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.