EN IEC 62828-5:2020

Reference conditions and procedures for testing industrial and process measurement transmitters - Part 5: Specific procedures for flow transmitters

IEC 62828-5:2020 establishes specific procedures for testing flow transmitters used in measuring and control systems for industrial process and for machinery control systems. For general test procedures, reference is to be made to IEC 62828-1:2017, applicable to all types of industrial and process measurement transmitters. This document – together with IEC 62828-1:2017 – is the reference standard for testing every type of flow transmitter, not only for liquids but also for gases and for steam. In this document, "industrial flow transmitters" consistently covers all types of flow transmitters used in measuring and control systems for industrial process and for machinery.

Referenzbedingungen und Testmethoden für Industrie- und Prozessmessgrößenumformer - Teil 5: Spezielle Testmethoden für Durchflusstransmitter

Conditions de référence et procédures pour l'essai des transmetteurs de mesure industriels et de processus - Partie 5: Procédures spécifiques pour les transmetteurs de débit

L'IEC 62828:2020 établit les procédures spécifiques d'essai des transmetteurs de débit utilisés dans les systèmes de mesure et de commande des processus industriels et des systèmes de commande des machines. Pour les procédures d'essais générales, référence doit être faite à l'IEC 62828-1:2017, applicable à tous les types de transmetteurs de mesure industriels et de processus. Le présent document (avec l'IEC 62828-1:2017) est la norme de référence pour soumettre à essai tous les types de transmetteurs de débit, non seulement pour les liquides, mais également pour les gaz et la vapeur. Dans le présent document, le terme "transmetteurs industriels de débit" couvre tous les types de transmetteurs de débit utilisés dans les systèmes de mesure et de commande des processus industriels et des machines.

Referenčni pogoji in postopki za preskušanje industrijskih in procesnih merilnih oddajnikov - 5. del: Posebni postopki za oddajnike pretoka (IEC 62828-5:2020)

General Information

• Status: Published
• Publication Date: 24-Sep-2020
• ICS: 17.200.20 - Temperature-measuring instruments
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65B - IEC_SC_65B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 25-Sep-2020
• Completion Date: 25-Sep-2020
• Ref Project: SIST EN IEC 62828-5:2020 - Reference conditions and procedures for testing industrial and process measurement transmitters - Part 5: Specific procedures for flow transmitters (IEC 62828-5:2020)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62828-5:2020
01-december-2020
Referenčni pogoji in postopki za preskušanje industrijskih in procesnih merilnih
oddajnikov - 5. del: Posebni postopki za oddajnike pretoka (IEC 62828-5:2020)
Reference conditions and procedures for testing industrial and process measurement
transmitters - Part 5: Specific procedures for flow transmitters (IEC 62828-5:2020)
Referenzbedingungen und Testmethoden für Industrie- und
Prozessmessgrößenumformer - Teil 5: Spezielle Testmethoden für Durchflusstransmitter
(IEC 62828-5:2020)
Conditions de référence et procédures pour l'essai des transmetteurs de mesure
industriels et de processus - Partie 5: Procédures spécifiques pour les transmetteurs de
débit (IEC 62828-5:2020)
Ta slovenski standard je istoveten z: EN IEC 62828-5:2020
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
SIST EN IEC 62828-5:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62828-5:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 62828-5:2020


EUROPEAN STANDARD EN IEC 62828-5

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2020
ICS 17.200.20; 25.040.40

English Version
Reference conditions and procedures for testing industrial and
process measurement transmitters - Part 5: Specific procedures
for flow transmitters
(IEC 62828-5:2020)
Conditions de référence et procédures pour l'essai des Referenzbedingungen und Testmethoden für Industrie- und
transmetteurs de mesure industriels et de processus - Prozessmessgrößenumformer - Teil 5: Spezielle
Partie 5: Procédures spécifiques pour les transmetteurs de Testmethoden für Durchflusstransmitter
débit (IEC 62828-5:2020)
(IEC 62828-5:2020)
This European Standard was approved by CENELEC on 2020-09-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62828-5:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62828-5:2020
EN IEC 62828-5:2020 (E)
European foreword
The text of document 65B/1179(F)/FDIS, future edition 1 of IEC 62828-5, prepared by SC 65B
“Measurement and control devices” of IEC/TC 65 “Industrial-process measurement, control and
automation” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 62828-5:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-06-22
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-09-22
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62828-5:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61685:2001 NOTE Harmonized as EN 61685:2001 (not modified)
ISO 4006:1991 NOTE Harmonized as EN 24006:1993 (not modified)
ISO 4064 series NOTE Harmonized as EN ISO 4064 series
ISO 5167 series NOTE Harmonized as EN ISO 5167 series
ISO 7278-1:1987 NOTE Harmonized as EN ISO 7278-1:1995 (not modified)
ISO 8316:1987 NOTE Harmonized as EN ISO 831
...