EN 60674-3-1:1998

Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors

Gives the requirements for biaxially oriented polypropylene film having a smooth or rough surface, corona treated when required for vacuum metallization. The films are for use as dielectric in capacitors.

Isolierfolien für elektrotechnische Zwecke - Teil 3: Anforderungen für einzelne Werkstoffe - Blatt 1: Biaxial orientierte Polypropylen-(PP)-Folien für Kondensatoren

Films plastiques à usages électriques - Partie 3: Spécifications pour matériaux particuliers - Feuille 1: Films de polypropylène biorienté (PP) pour condensateurs

Donne les prescriptions relatives aux films de polypropylène biorienté à surface lisse ou rugueuse, avec traitement par effet couronne si nécessaire pour la métallisation sous vide. Les films sont utilisés comme diélectrique dans les condensateurs.

Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors (IEC 60674-3-1:1998)

Podaja zahteve za dvoosno orientirano polipropilensko folijo z gladko ali grobo površino, koronsko obdelano, kadar je to potrebno za vakuumsko metalizacijo. Folije se uporabljajo kot dielektriki v kondenzatorjih.

General Information

• Status: Withdrawn
• Publication Date: 31-Mar-1998
• Withdrawal Date: 31-Dec-2000
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: CLC/SR 15 - Insulating materials
• Drafting Committee: IEC/TC 15 - IEC_TC_15
• Parallel Committee: IEC/SC 15C - IEC_SC_15C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 29-Sep-2024
• Completion Date: 29-Sep-2024
• Ref Project: SIST EN 60674-3-1:2001 - Plastic films for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors

Relations

• Replaced By: EN IEC 60674-3-1:2021 - Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
• Effective Date: 05-Oct-2021
• Amended By: EN 60674-3-1:1998/A1:2011 - Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2001
Plastic films for electrical purposes - Part 3: Specifications for individual materials
- Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors (IEC 60674-3-
1:1998)
Plastic films for electrical purposes -- Part 3: Specifications for individual materials --
Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
Isolierfolien für elektrotechnische Zwecke -- Teil 3: Anforderungen für einzelne
Werkstoffe -- Blatt 1: Biaxial orientierte Polypropylen-(PP)-Folien für Kondensatoren
Films plastiques à usages électriques -- Partie 3: Spécifications pour matériaux
particuliers -- Feuille 1: Films de polypropylène biorienté (PP) pour condensateurs
Ta slovenski standard je istoveten z: EN 60674-3-1:1998
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

NORME
CEI
INTERNATIONALE
IEC
60674-3-1
INTERNATIONAL
Première édition
STANDARD
First edition
1998-03
Films plastiques à usages électriques –
Partie 3:
Spécifications pour matériaux particuliers –
Feuille 1: Films de polypropylène biorienté (PP)
pour condensateurs
Plastic films for electrical purposes –
Part 3:
Specifications for individual materials –
Sheet 1: Biaxially oriented polypropylene (PP)
films for capacitors
 IEC 1998 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE L
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60674-3-1  IEC:1998 – 3 –
CONTENTS
Page
FOREWORD . 5
INTRODUCTION . 7
Clause
1 General . 9
1.1 Scope . 9
1.2 Normative references. 9
1.3 Classification . 9
2 Designation . 11
3 General requirements . 11
4 Dimensions. 11
4.1 Thickness . 11
4.2 Width. 11
4.3 Length/diameter. 13
5 Properties. 13
5.1 Physical properties. 13
5.2 Electric strength (d.c. test) . 15
5.3 Electrical weak spots . 15
5.4 Thermal endurance. 15
5.5 Wetting tension (types 1b + 1c and 2b + 2c only). 17
5.6 Liquid absorption . 17
5.7 Compatibility with impregnants . 17
5.8 Dissipation factor under impregnated conditions. 17
5.9 Space factor . 17
6 Roll characteristics . 19
6.1 Windability. 19
6.2 Joins. 19
6.3 Roll width (overall width) . 19
6.4 Core . 21
6.5 Labelling. 21

60674-3-1  IEC:1998 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
__________
PLASTIC FILMS FOR ELECTRICAL PURPOSES –
Part 3: Specifications for individual materials –
Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical reports or guides and they are accepted by the National Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60674-3-1 has been prepared by subcommittee 15C: Specifications,
of IEC technical committee 15: Insulating materials.
The text of this standard is based on the following documents:
FDIS Report on voting
15C/862/FDIS 15C/952/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

60674-3-1  IEC:1998 – 7 –
INTRODUCTION
This International Standard is one of a series which deals with plastic films for electrical
purposes.
The series consists of three parts.
– Part 1: Definitions and general requirements (IEC 60674-1).
– Part 2: Methods of test (IEC 60674-2).
– Part 3: Specifications for individual materials (IEC 60674-3).
This standard contains one of the sheets comprising part 3, as follows:
Sheet 1: Biaxially oriented (PP) polypropylene films for capacitors.

60674-3-1  IEC:1998 – 9 –
PLASTIC FILMS FOR ELECTRICAL PURPOSES –
Part 3: Specifications for individual materials –
Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors
1 General
1.1 Scope
This sheet of IEC 60674-3 gives the requirements for biaxially oriented polypropylene film
having a smooth or rough surface, corona treated when required for vacuum metallization. The
films are for use as dielectric in capacitors.
1.2 Normative references
The following normative documents contain provisions which, through reference in this text,
constitute provisions of this sheet of IEC 60674-3. At the time of publication, the editions
indicated were valid. All normative documents are subject to revision, and parties to agreement
based on this sheet of IEC 60674-3 are encouraged to investigate the possibility of applying the
1)
most recent editions of the normative documents indicated below . Members of IEC and ISO
maintain registers of currently valid International Standards.
IEC 60674-1:1980, Specification for plastic films for electrical purposes – Part 1: Definitions
and general requirements
IEC 60674-2:1988, Specification for plastic films for electrical purposes – Part 2:
...