Information technology - Generic cabling systems - Part 1: General requirements

This European Standard specifies: a) the structure and configuration of the backbone cabling subsystems of generic cabling systems within the types of premises defined by the other standards in the EN 50173 series; b) channel performance requirements in support of the standards in the EN 50173 series; c) link performance requirements in support of the standards in the EN 50173 series; d) backbone cabling reference implementations in support of the standards in the EN 50173 series; e) component performance requirements in support of the standards in the EN 50173 series. Safety (electrical safety and protection, optical power, fire, etc.) and electromagnetic compatibility (EMC) requirements are outside the scope of this European Standard and are covered by other standards and regulations. However, information given in this European Standard may be of assistance in meeting these standards and regulations.

Informationstechnik - Anwendungsneutrale Kommunikationskabelanlagen - Teil 1: Allgemeine Anforderungen

Technologies de l'information - Systèmes de câblage générique - Partie 1: Exigences générales

Informacijska tehnologija - Univerzalni sistemi pokabljenja - 1. del: Splošne zahteve

Ta evropski standard določa:
a) strukturo in konfiguracijo hrbteničnih podsistemov polaganja kablov v univerzalnih sistemih za polaganje kablov znotraj tipov prostorov, ki so določeni z drugimi standardi serije EN 50173; b) delovne zahteve kanalov v podporo standardom serije EN 50173; c) delovne zahteve zvez v podporo standardom serije EN 50173; d) referenčna izvedba hrbteničnega polaganja kablov v podporo standardom serije EN 150173; e) delovne zahteve komponent v podporo standardom serije EN 50173.Varnostne zahteve (električna varnost in zaščita, optična moč, ogenj itd.) in zahteve elektromagnetne združljivosti (EMC) so zunaj področja tega evropskega standarda in so zajete z drugimi standardi in predpisi. Vendar so lahko informacije, podane v tem evropskem standardu, v pomoč pri izpolnjevanju teh standardov in predpisov.

General Information

Status
Withdrawn
Publication Date
30-May-2007
Withdrawal Date
30-Apr-2010
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Apr-2014
Completion Date
01-Apr-2014

Relations

Buy Standard

Standard
EN 50173-1:2008
English language
125 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Information technology - Generic cabling systems - Part 1: General requirementsInformacijska tehnologija - Univerzalni sistemi pokabljenja - 1. del: Splošne zahteveTechnologies de l'information - Systemes de câblage générique - Partie 1: Exigences généralesInformationstechnik - Anwendungsneutrale Kommunikationskabelanlagen -- Teil 1: Allgemeine AnforderungenTa slovenski standard je istoveten z:EN 50173-1:2007SIST EN 50173-1:2008en,de35.110OmreževanjeNetworking33.040.50Vodi, zveze in tokokrogiLines, connections and circuitsICS:SIST EN 50173-1:20031DGRPHãþDSLOVENSKI
STANDARDSIST EN 50173-1:200801-januar-2008

EUROPEAN STANDARD EN 50173-1 NORME EUROPÉENNE
EUROPÄISCHE NORM May 2007
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50173-1:2007 E
ICS 33.040.50 Partially supersedes EN 50173-1:2002
English version
Information technology -
Generic cabling systems -
Part 1: General requirements
Technologies de l'information -
Systèmes de câblage générique -
Partie 1: Exigences générales
Informationstechnik -
Anwendungsneutrale Kommunikationskabelanlagen -
Teil 1: Allgemeine Anforderungen
This European Standard was approved by CENELEC on 2007-04-11. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50173-1 on 2007-04-11. The following dates were fixed: – latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement
(dop)
2008-05-01 – latest date by which the national standards conflicting with the EN have to be withdrawn
(dow)
2010-05-01 The previous editions of European Standards EN 50173:1995 and EN 50173-1:2002 have been developed to enable the application-independent cabling to support ICT applications in office premises. Their basic principles, however, are applicable to other types of applications and in other types of premises.
TC 215 has decided to establish relevant European Standards which address the specific requirements of these premises. In order to point out the commonalities of these cabling design standards, these EN are published as individual parts of the series EN 50173, thus also acknowledging that standards users recognize the designation “EN 50173” as a synonym for generic cabling design.
At the time of publication of this European Standard, series EN 50173 comprises the following standards: EN 50173-1 Information technology – Generic cabling systems – Part 1: General requirements EN 50173-2 Information technology – Generic cabling systems – Part 2: Office premises EN 50173-3 Information technology – Generic cabling systems – Part 3: Industrial premises EN 50173-4 Information technology – Generic cabling systems – Part 4: Homes EN 50173-5 Information technology – Generic cabling systems – Part 5: Data centres This European Standard, EN 50173-1, together with EN 50173-2:2007 supersedes EN 50173-1:2002. This standard contains those specifications of EN 50173-1:2002, which are common to generic cabling systems irrespective of the type of premises. This European Standard also
- introduces the concept of environmental classification (Subclause 5.1); - specifies additional channels for balanced and optical fibre cabling media; - specifies additional channels for coaxial cabling; - specifies the minimum component requirements in support of these additional cabling channels; - extends and amends the list of applications supported by generic cabling systems.

– 3 –
Figures Figure 1 – Schematic relationship between the EN 50173 series and other relevant standards.9 Figure 2 – Structure of generic cabling.23 Figure 3 – Hierarchical structure of generic cabling.24 Figure 4 – Interconnect and cross-connect models.26 Figure 5 – Test and equipment interfaces for backbone cabling.26 Figure 6 – Backbone cabling model.47 Figure 7 – Pin grouping and pair assignments for EN 60603-7 series connecting hardware
(front view of connector).72

– 5 –
(front view of connector).72 Figure 9 – Four position jack pin and pair grouping assignments for EN 61076-2-101 connecting hardware
(front view of connector).73 Figure A.1 – Link options.80 Figure G.1 - Variation of the environment along a cabling channel.114 Figure G.2 - The local environment.115 Figure G.3 - Noise Ranges of Common Industrial Machine Devices.121 Figure G.4 - Guidance on separation of cabling from noise sources.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.