EN 50173-1:2002
(Main)Information technology - Generic cabling systems - Part 1: General requirements and office areas
Information technology - Generic cabling systems - Part 1: General requirements and office areas
Corrigendum to EN issued November 2004 * Superseded by EN 50173-1:2007 and EN 50173-2:2007
Informationstechnik - Anwendungsneutrale Kommunikationskabelanlagen - Teil 1: Allgemeine Anforderungen und Bürobereiche
Technologies de l'information - Systèmes génériques de câblage - Partie 1: Spécification générale et environnement de bureaux
Information technology - Generic cabling systems - Part 1: General requirements and office areas
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 50173-1:2003
01-februar-2003
1DGRPHãþD
SIST EN 50173:1997
SIST EN 50173:1997/A1:2000
Information technology - Generic cabling systems - Part 1: General requirements
and office areas
Information technology - Generic cabling systems -- Part 1: General requirements and
office areas
Informationstechnik - Anwendungsneutrale Kommunikationskabelanlagen -- Teil 1:
Allgemeine Anforderungen und Bürobereiche
Technologies de l'information - Systèmes génériques de câblage -- Partie 1:
Spécification générale et environnement de bureaux
Ta slovenski standard je istoveten z: EN 50173-1:2002
ICS:
33.040.50 Vodi, zveze in tokokrogi Lines, connections and
circuits
35.110 Omreževanje Networking
SIST EN 50173-1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 50173-1:2003
---------------------- Page: 2 ----------------------
SIST EN 50173-1:2003
EUROPEAN STANDARD EN 50173-1
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2002
ICS 33.040.50
English version
Information technology -
Generic cabling systems
Part 1: General requirements and office areas
Technologies de l'information - Informationstechnik -
Systèmes génériques de câblage Anwendungsneutrale
Partie 1: Spécification générale Kommunikationskabelanlagen
et environnement de bureaux Teil 1: Allgemeine Anforderungen
und Bürobereiche
This European Standard was approved by CENELEC on 2002-11-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50173-1:2002 E
---------------------- Page: 3 ----------------------
SIST EN 50173-1:2003
EN 50173-1:2002 - 2 -
Foreword
This European Standard has been prepared by Technical Committee CENELEC/TC 215 „Electrotechnical
aspects of telecommunication equipment" under the framework of the Mandates M/212 on
„Telecommunication cables and cabling systems" and M/239 on „Air traffic management equipment and
systems".
The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50173-1 on
2002-11-01.
The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-11-01
- latest date by which the national standards
conflicting with the EN have to be withdrawn (dow) 2003-11-01
The first edition of this European Standard had been developed to enable the application-independent pre-
cabling of office premises. Its basic principles, however, are applicable also in various other situations
including industrial premises and residential buildings, and TC 215 has started to establish relevant European
Standards which address the specific requirements of these environments. In order to point out the
commonalities of these cabling design standards, TC 215 has decided to publish them as individual parts of
the series EN 50173, thus also acknowledging that nowadays standards users recognize the designation
“EN 50173” as a synonym for generic cabling design.
This European Standard, EN 50173-1, supersedes both EN 50173:1995 and EN 50173:1995/A1:2000 and
constitutes a complete revision thereof (it is related to, but not identical with, ISO/IEC 11801:2002). Essential
changes include the following:
- centralized generic cabling in addition to hierarchical three-level topology,
- new modelling of the horizontal cabling subsystem with an optional consolidation point,
- new channel Classes E and F for balanced cabling and associated component Categories 6 and 7,
- classification of optical fibre cabling channels and associated
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.