EN 50173-1:2011
(Main)Information technology - Generic cabling systems - Part 1: General requirements
Information technology - Generic cabling systems - Part 1: General requirements
Scope This European Standard specifies: a) the structure and configuration of the backbone cabling subsystems of generic cabling systems within the types of premises defined by the other standards in the EN 50173 series; b) channel performance requirements in support of the standards in the EN 50173 series; c) link performance requirements in support of the standards in the EN 50173 series; d) backbone cabling reference implementations in support of the standards in the EN 50173 series; e) component performance requirements in support of the standards in the EN 50173 series. Safety (electrical safety and protection, optical power, fire, etc.) and electromagnetic compatibility (EMC) requirements are outside the scope of this European Standard and are covered by other standards and regulations. However, information given in this European Standard may be of assistance in meeting these standards and regulations. 1.2 Conformance This European Standard does not contain specific conformance requirements. The other standards in the EN 50173 series incorporate the requirements of this standard as part of their individual conformance requirements.
Informationstechnik - Anwendungsneutrale Kommunikationskabelanlagen - Teil 1: Allgemeine Anforderungen
Technologies de l'information - Systèmes de câblage générique - Partie 1: Exigences générales
Informacijska tehnologija - Univerzalni sistemi polaganja kablov - 1. del: Splošne zahteve
Ta evropski standard določa: a) strukturo in konfiguracijo hrbteničnih podsistemov polaganja kablov v univerzalnih sistemih za polaganje kablov v tipih prostorov, ki so določeni z drugimi standardi serije EN 50173; b) delovne zahteve kanalov v podporo standardom serije EN 50173; c) delovne zahteve zvez v podporo standardom serije EN 50173; d) referenčna izvedba hrbteničnega polaganja kablov v podporo standardom serije EN 150173; e) delovne zahteve komponent v podporo standardom serije EN 50173. Varnostne zahteve (električna varnost in zaščita, optična moč, ogenj itd.) in zahteve elektromagnetne združljivosti (EMC) so zunaj področja tega evropskega standarda in so zajete z drugimi standardi in predpisi. Vendar so lahko informacije, podane v tem evropskem standardu, opora pri izpolnjevanju teh standardov in predpisov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 50173-1:2011
01-julij-2011
1DGRPHãþD
SIST EN 50173-1:2008
Informacijska tehnologija - Univerzalni sistemi polaganja kablov - 1. del: Splošne
zahteve
Information technology - Generic cabling systems - Part 1: General requirements
Informationstechnik - Anwendungsneutrale Kommunikationskabelanlagen - Teil 1:
Allgemeine Anforderungen
Technologies de l'information - Systèmes de câblage générique - Partie 1: Exigences
générales
Ta slovenski standard je istoveten z: EN 50173-1:2011
ICS:
33.040.50 Vodi, zveze in tokokrogi Lines, connections and
circuits
35.110 Omreževanje Networking
SIST EN 50173-1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 50173-1:2011
---------------------- Page: 2 ----------------------
SIST EN 50173-1:2011
EUROPEAN STANDARD
EN 50173-1
NORME EUROPÉENNE
May 2011
EUROPÄISCHE NORM
ICS 33.040.50
English version
Information technology -
Generic cabling systems -
Part 1: General requirements
Technologies de l'information - Informationstechnik -
Systèmes de câblage générique - Anwendungsneutrale
Partie 1: Exigences générales Kommunikationskabelanlagen -
Teil 1: Allgemeine Anforderungen
This European Standard was approved by CENELEC on 2011-04-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia,
Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50173-1:2011 E
---------------------- Page: 3 ----------------------
SIST EN 50173-1:2011
EN 50173-1:2011 – 2 –
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 215, Electrotechnical
rd
aspects of telecommunication equipment. This 3 edition of EN 50173-1 replaces the text of
EN 50173-1:2007, EN 50173-1:2007/A1:2009 and consolidates these two standards with the text of
EN 50173-1:2007/FprAB:2010 for the convenience of the user of the standard.
The text of draft amendment EN 50173-1:2007/FprAB was submitted to the Formal Vote and was approved
by CENELEC to amend EN 50173-1:2007 on 2011-04-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2012-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-04-01
The previous editions of European Standards EN 50173:1995 and EN 50173-1:2002 have been developed
to enable the application-independent cabling to support ICT applications in office premises. Their basic
principles, however, are applicable to other types of applications and in other types of premises.
TC 215 has decided to establish relevant European Standards which address the specific requirements of
these premises. In order to point out the commonalities of these cabling design standards, these ENs are
published as individual parts of the series EN 50173, thus also acknowledging that standards users recog-
nize the designation “EN 50173” as a synonym for generic cabling design.
At the time of publication of this European Standard, series EN 50173 comprises the following standards:
− EN 50173-1 Information technology – Generic cabling systems – Part 1: General requirements
− EN 50173-2 Information technology – Generic cabling systems – Part 2: Office premises
− EN 50173-3 Information technol
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.