EN 60400:2017/A2:2024
(Amendment)Lampholders for tubular fluorescent lamps and starterholders
Lampholders for tubular fluorescent lamps and starterholders
Lampenfassungen für röhrenförmige Leuchtstofflampen und Starterfassungen
Douilles pour lampes tubulaires à fluorescence et douilles pour starters
Okovi za cevaste fluorescenčne sijalke in starterski okovi - Dopolnilo A2 (IEC 60400:2017/AMD2:2022)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2024
Okovi za cevaste fluorescenčne sijalke in starterski okovi - Dopolnilo A2 (IEC
60400:2017/AMD2:2022)
Lampholders for tubular fluorescent lamps and starterholders (IEC
60400:2017/AMD2:2022)
Lampenfassungen für röhrenförmige Leuchtstofflampen und Starterfassungen (IEC
60400:2017/AMD2:2022)
Douilles pour lampes tubulaires à fluorescence et douilles pour starters (IEC
60400:2017/AMD2:2022)
Ta slovenski standard je istoveten z: EN 60400:2017/A2:2024
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60400:2017/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2024
ICS 29.140.10
English Version
Lampholders for tubular fluorescent lamps and starterholders
(IEC 60400:2017/AMD2:2022)
Douilles pour lampes tubulaires à fluorescence et douilles Lampenfassungen für röhrenförmige Leuchtstofflampen und
pour starters Starterfassungen
(IEC 60400:2017/AMD2:2022) (IEC 60400:2017/AMD2:2022)
This amendment A2 modifies the European Standard EN 60400:2017; it was approved by CENELEC on 2024-07-23. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60400:2017/A2:2024 E
European foreword
The text of document 34B/2110/CDV, future IEC 60400/AMD2, prepared by SC 34B "Lamp caps and
holders" of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60400:2017/A2:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-04-23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-07-23
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CENELEC by the
European Commission. The Standing Committee of the EFTA States subsequently approves these
requests for its Member States.
For the relationship with EU Legislation, see informative Annex ZZ, which is an integral part of this
document.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60400:2017/AMD2:2022 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Replace all references with the following:
Publication Year Title EN/HD Year
IEC 60061-2 - Lamp caps and holders together with gauges EN 60061-2 1993
for the control of interchangeability and safety -
Part 2: Lampholders
+ A1 1995
+ A2 1995
+ A3 1995
+ A4 1996
+ A5 1996
+ A6 1996
+ A7 1997
+ A18 1998
+ A19 1999
+ A20 1999
+ A21 2000
+ A22 2001
+ A23 2001
+ A24 2001
+ A25 2002
+ A26 2002
+ A27 2002
+ A28 2003
+ A29 2003
+ A30 2003
+ A31 2004
+ A32 2005
+ A33 2005
+ A34 2006
+ A35 2007
+ A36 2007
+ A37 2008
+ A38 2009
+ A39 2009
+ A40 2010
+ A41 2010
+ A42 2011
+ A43 2011
+ A44 2012
+ A45 2012
+ A46 2013
+ A47 2014
+ A47/AC 2023
+ A48 2015
+ A49 2015
+ A50 2015
+ A51 2016
+ A52 2017
+ A53 2018
+ A54 2018
+ A55 2020
+ A56 2020
+ A57 2021
+ A58 2022
+ A59 2023
IEC 60061-3 - Lamp caps and holders together with gauges EN 60061-3 1993
for the control of interchangeability and safety -
Part 3: Gauges
+ A1 1995
+ A2 1995
+ A3 1995
+ A4 1996
+ A5 1996
+ A6 1996
+ A7 1997
+ A20 1998
+ A21 1999
+ A22 1999
+ A23 2000
+ A24 2001
+ A25 2001
+ A26 2001
+ A27 2002
+ A28 2002
+ A29 2002
+ A30 2003
+ A31 2003
+ A32 2003
+ A33 2004
+ A34 2005
+ A35 2005
+ A36 2006
+ A37 2007
+ A38 2007
+ A39 2009
+ A40 2009
+ A41 2010
+ A42 2010
+ A43 2011
+ A44 2011
+ A45 2012
+ A46 2012
+ A47 2013
+ A48 2014
+ A49 2015
+ A50 2015
+ A51 2015
+ A52 2016
+ A53 2017
+ A54 2018
+ A55 2018
+ A56 2019
+ A57 2020
+ A58 2020
+ A59 2023
+ A60 2024
IEC 60068-2-20 2008 Environmental testing - Part 2-20: Tests - Test EN IEC 60068-2-20 2021
T: Test methods for solderability and resistance
to soldering heat of devices with leads
IEC 60068-2-75 2014 Environmental testing - Part 2-75: Tests - Test EN 60068-2-75 2014
Eh: Hammer tests
IEC 60081 - Double-capped fluorescent lamps - EN 60081 1998
Performance specifications
+ A1 2002
+ A2 2003
+ A3 2005
+ A4 2010
+ A5 2013
+ A6 2017
+ A11 2018
IEC 60112 2003 Method for the determination of the proof and EN IEC 60112 2020
the comparative tracking indices of solid
insulating materials
+ A1 2009
IEC 60155 Glow-starters for fluorescent lamps EN 60155 1995
+ A1 1995
+ A2 2007
IEC 60352-1 1997 Solderless connections - Part 1: Wrapped EN 60352-1 1997
connections - General requirements, test
methods and practical guidance
IEC 60399 - Barrel thread for lampholders with shade holder EN 60399 2004
ring
+ A1 2008
IEC 60529 1989 Degrees of protection provided by enclosures EN 60529 1991
(IP Code)
- - + corrigendum May 1993
+ A1 1999 + A1 2000
+ A2 2013 + A2 2013
IEC 60598-1 - Luminaires - Part 1: General requirements and EN IEC 60598-1 2021
tests
IEC 60695-2-11 2000 Fire hazard testing - Part 2-11: Glowing/hot- EN IEC 60695-2-11 2021
wire based test methods - Glow-wire
flammability test method for end-products
IEC 60695-11-5 2016 Fire hazard testing - Part 11-5: Test flames - EN 60695-11-5 2017
Needle-flame test method - Apparatus,
confirmatory test arrangement and guidance
ISO 4046-4 2016 Paper, board, pulps and related terms - - -
Vocabulary - Part 4: Paper and board grades
and converted products
Annex ZZ
(informative)
Relationship between this European standard and the safety
objectives of Directive 2014/35/EU [2014 OJ L96] aimed to be
covered
This European standard has been prepared under a Commission’s standardisation request relating to
harmonised standards in the field of the Low Voltage Directive, M/511, to provide one voluntary means
of conforming to safety objectives of Directive 2014/35/EU of the European Parliament and of the
Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the
making available on the market of electrical equipment designed for use within certain voltage limits
[2014 OJ L96].
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding safety objectives of
that Directive, and associated EFTA regulations.
Table ZZ.1 — Correspondence between this European standard and Annex I of Directive
2014/35/EU [2014 OJ L96]
Clause(s) / sub-clause(s)
Safety objectives of Directive
Remarks / Notes
2014/35/EU
of this EN
1. General conditions
a) the essential characteristics, the Clause 8
recognition and observance of which
will ensure that electrical equipment
will be used safely and in applications
for which it was made, shall be
marked on the electrical equipment,
or, if this is not possible, on an
accompanying document;
b) the electrical equipment, together Clause 10 and 11
with its component parts, shall be
made in such a way as to ensure that
it can be safely and properly
assembled and connected;
c) the electrical equipment shall be so See item 2 and 3 of this table
designed and manufactured as to
ensure that protection against the
hazards set out in points 2 and 3 is
assured, providing that the equipment
is used in applications for which it was
made and is adequately maintained.
2. Protection against hazards
arising from the electrical
equipment
Measures of a technical nature shall
be laid down in accordance with point
1, in order to ensure that:
a) persons and domestic animals are Clauses 4, 9, 10, 11, 12 and 16
adequately protected against the
danger of physical injury or other harm
which might be caused by direct or
indirect contact;
b) temperatures, arcs or radiation Clauses 11, 12, 14, 17 and 18
which would cause a danger, are not
produced;
c) persons, domestic animals and Clauses 4, 11, 14, 15 and 19
property are adequately protected
against non-electrical dangers caused
by the electrical equipment which are
revealed by experience;
d) the insulation is suitable for Clauses 9, 11, 15, 17 and 18
foreseeable conditions.
3. Protection against hazards which
may be caused by external
influences on the electrical
equipment
Technical measures shall be laid down
in accordance with point 1, in order to
ensure that the electrical equipment:
a) meets the expected mechanical Clauses 8, 11, 15 and 19
requirements in such a way that
persons, domestic animals and
property are not endangered;
b) is resistant to non-mechanical Clauses 11, 13, 17 and 18
influences in expected environmental
conditions, in such a way that persons,
domestic animals and property are not
endangered;
c) does not endanger persons, Clauses 11, 13 and 18
domestic animals and property in
foreseeable conditions of overload.
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
IEC 60400 ®
Edition 8.0 2022-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 2
AM ENDEMENT 2
Lampholders for tubular fluorescent lamps and starterholders
Douilles pour lampes tubulaires à fluorescence et douilles pour starters
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.10 ISBN 978-2-8322-4103-5
– 2 – IEC 60400:2017/AMD2:2022
© IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LAMPHOLDERS FOR TUBULAR FLUORESCENT
LAMPS AND STARTERHOLDERS
AMENDMENT 2
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.