EN 61169-44:2013

Radio-frequency connectors - Part 44: Sectional specification for series SMP push-on radio-frequency coaxial connectors

IEC 61169-44:2012(E) is a sectional specification (SS), it provides information and rules for preparation of detail specification of SMP series push-on RF coaxial connectors together with the pro-forma blank detail specification. The SMP push-on series connectors with characteristic impedance of 50 Ohms are used with RF cables or micro-strips in microwave, telecommunication, wireless and other fields. The operating frequency limit is up to 40 GHz. It also prescribes mating face dimensions for general purpose connectors grade 1, dimensional details of standard test connectors grade 0, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications relating to series SMP RF connectors. This specification indicates the recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H. This International Standard cancels and replaces IEC/PAS 61169-44, published in 2010.

Hochfrequenz-Steckverbinder - Teil 44: Rahmenspezifikation für koaxiale HF-Steckverbinder der SMP-Serie mit Push-on-Einrastmechanismus

Connecteurs pour fréquences radioélectriques - Partie 44: Spécification intermédiaire relative aux connecteurs coaxiaux pour fréquences radioélectriques glissants, série SMP

La CEI 61169-44:2012 est une spécification intermédiaire qui fournit des informations et des règles en vue de l'établissement de la spécification particulière des connecteurs coaxiaux RF glissants série SMP, ainsi que la spécification particulière cadre pro-forma. Les connecteurs glissants série SMP avec impédance caractéristique de 50 Ω sont utilisés avec des câbles RF ou des microrubans dans les domaines de l'hyperfréquence, des télécommunications, des liaisons sans-fil et autres domaines. La limite de fréquence de fonctionnement est inférieure ou égale à 40 GHz. Elle prescrit également les dimensions d'interface d'accouplement pour des connecteurs d'usage général - classe 1, les détails dimensionnels des connecteurs d'essai normalisés - classe 0, les informations de calibrage et les essais choisis dans la CEI 61169-1, applicables à toutes les spécifications particulières ayant trait aux connecteurs RF, série SMP. La présente spécification indique les caractéristiques de performance recommandées à prendre en compte pour la rédaction d'une spécification particulière, et elle couvre les programmes d'essais et les exigences de contrôle pour les niveaux d'assurance qualité M et H.

Radiofrekvenčni konektorji - 44. del: Področna specifikacija za serijo koaksialnih natičnih radiofrekvenčnih SMP konektorjev

Ta del standarda IEC 61169, ki je področna specifikacija (SS), podaja informacije in določa pravila za pripravo podrobne specifikacije za serijo koaksialnih natičnih radiofrekvenčnih SMP konektorjev skupaj s pro forma okvirno podrobno specifikacijo. Natični SMP konektorji s karakteristično impendanco 50 O se uporabljajo z radiofrekvenčnimi kabli ali mikrotrakovi pri mikrovalovanju, telekomunikacijah, v brezžičnih omrežjih in na drugih področjih. Omejitev frekvenčnega območja delovanja je do 40 GHz. Prav tako prepisuje prednje dimenzije stikanja za konektorje za splošni namen – tip 1, podrobnosti o dimenziji standardnih preskusnih konektorjev – tip 0, merjenje informacij in preskuse, izbrane iz standarda IEC 61169-1, ki se uporabljajo za vse podrobne specifikacije v zvezi z radiofrekvenčnimi SMP konektorji. Ta specifikacija določa priporočene lastnosti, ki jih je treba upoštevati pri sestavljanju podrobne specifikacije ter zajema urnike preskusov in zahteve za pregled za ravni vrednotenja M in H.

General Information

• Status: Published
• Publication Date: 13-Jun-2013
• Withdrawal Date: 15-Jan-2016
• ICS: 33.120.30 - RF connectors
• Technical Committee: CLC/SR 46F - RF and microwave passive components
• Drafting Committee: IEC/SC 46F - IEC_SC_46F
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 14-Jun-2013
• Completion Date: 14-Jun-2013
• Ref Project: SIST EN 61169-44:2013 - Radio-frequency connectors - Part 44: Sectional specification for series SMP push-on radio-frequency coaxial connectors

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2013
5DGLRIUHNYHQþQLNRQHNWRUMLGHO3RGURþQDVSHFLILNDFLMD]DVHULMRNRDNVLDOQLK
QDWLþQLKUDGLRIUHNYHQþQLK603NRQHNWRUMHY
Radio-frequency connectors - Part 44: Sectional specification for series SMP push-on
radio-frequency coaxial connectors
Hochfrequenz-Steckverbinder - Teil 44: Rahmenspezifikation für koaxiale HF-
Steckverbinder der SMP-Serie
Connecteurs pour fréquences radioélectriques -- Partie 44: Spécification intermédiaire
relative aux connecteurs coaxiaux pour fréquences radioélectriques glissants, série SMP
Ta slovenski standard je istoveten z: EN 61169-44:2013
ICS:
33.120.30 5DGLRIUHNYHQþQLNRQHNWRUML R.F. connectors
5)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61169-44
NORME EUROPÉENNE
June 2013
EUROPÄISCHE NORM
ICS 33.120.30
English version
Radio-frequency connectors -
Part 44: Sectional specification for series SMP push-on radio-frequency
coaxial connectors
(IEC 61169-44:2012)
Connecteurs pour fréquences Hochfrequenz-Steckverbinder -
radioélectriques - Teil 44: Rahmenspezifikation für koaxiale
Partie 44: Spécification intermédiaire HF-Steckverbinder der SMP-Serie mit
relative aux connecteurs coaxiaux pour Push-on-Einrastmechanismus
fréquences radioélectriques glissants, (IEC 61169-44:2012)
série SMP
(CEI 61169-44:2012)
This European Standard was approved by CENELEC on 2013-01-16. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61169-44:2013 E
Foreword
The text of document 46F/184/CDV, future edition 1 of IEC 61169-44, prepared by SC 46F, "R.F. and
microwave passive components", of IEC TC 46, "Cables, wires, waveguides, R.F. connectors, R.F. and
microwave passive components and accessories" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 61169-44:2013.
The following dates are fixed:
(dop) 2013-12-14
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2016-01-16
standards conflicting with the

document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61169-44:2012 was approved by CENELEC as a European
Standard without any modification.

- 3 - EN 61169-44:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 61169-1 1992 Radio-frequency connectors - EN 61169-1 1994
+ A1 1996 Part 1: Generic specification - General + A1 1996
+ A2 1997 requirements and measuring methods + A2 1997

IEC 61169-44 ®
Edition 1.0 2012-12
INTERNATIONAL
STANDARD
colour
inside
Radio-frequency connectors –
Part 44: Sectional specification for series SMP push-on radio-frequency coaxial

connectors
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
V
ICS 33.120.30 ISBN 978-2-83220-565-5

– 2 – 61169-44 © IEC:2012(E)
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Mating face and gauge information . 7
3.1 Dimensions – General connectors – Grade 1 . 7
3.1.1 Connector with pin-centre contact . 7
3.1.2 Connector with socket-centre contact . 10
3.2 Gauges . 11
3.2.1 Gauge pin for socket-centre contact . 11
3.2.2 Gauge for outer contact of connector with socket-centre contact . 12
3.3 Dimensions – standard test connectors – grade 0. 16
3.3.1 Connector with pin-centre contact . 16
3.3.2 Connector with socket-centre contact . 18
4 Quality assessment procedure . 19
4.1 General . 19
4.2 Rating and characteristics (see Clause 6 of IEC 61169-1) . 19
4.3 Test schedule and inspection requirements-Acceptance tests . 23
4.3.1 Periodic tests. 23
4.4 Procedures . 25
4.4.1 Quality conformance inspection . 25
4.4.2 Qualification approval and its maintenance . 25
5 Instructions for preparation of detail specifications . 25
5.1 General . 25
5.2 Identification of the component . 25
5.3 Performance . 26
5.4 Marking, ordering information and related matters . 26
5.5 Selection of tests, test conditions and severities . 26
5.6 Blank detail specification pro-forma for series SMP connectors . 27

Figure 1 – Connector with pin-centre contact – Limited detent and full detent (for
dimensions and notes, see Table 1) . 7
Figure 2 – Connector with pin- centre contact – Smooth bore (for dimensions and
notes, see Table 2) . 8
Figure 3 – Connector with pin- centre contact – Catchers mit (for dimensions and
notes, see Table 3) . 9
Figure 4 – Connector with socket-centre contact (for dimensions and notes, see Table
4) . 10
Figure 5 – Gauge pin for socket-centre contact (for dimensions and notes, see Table 5) . 11
Figure 6 – Gauge with limited detent for outer contact of connector with socket-outer
contact (for dimensions and notes, see Table 6) . 12
Figure 7 – Gauge pin – Full detent for outer contact of connector with socket-centre
(for dimensions and notes, see Table 7) . 13
Figure 8 – Gauge pin – Smooth bore for outer contact of connector with socket-centre
(for dimensions and notes, see Table 8) . 15
Figure 9 – Connector with pin- centre contact – Limited detent and full detent (for
dimensions and notes, see Table 9) . 16

61169-44 © IEC:2012(E) – 3 –
Figure 10 – Connector with pin- centre contact – Smooth bore (for dimensions and
notes, see Table 10) . 17
Figure 11 – Connector with socket-centre contact (for dimensions and notes, see
Table 11) . 18

Table 1 – Dimensions of connector with pin-centre contact – Limited detent and full
detent . 7
Table 2 – Dimensions of connector with pin-centre contact – Smooth bore . 8
Table 3 – Dimensions of connector with pin-centre contact – Catchers mit . 9
Table 4 – Dimensions of connector with socket-centre contact . 10
Table 5 – Dimensions of gauge pin for socket-centre contact . 11
Table 6 – Gauge with limited detent for outer contact of connector with socket-outer
contact . 12
Table 7 – Gauge pin – Full detent for outer contact of connector with socket-centre . 14
Table 8 – Gauge pin – Smooth bore for outer contact of connector with socket-centre . 15
Table 9 – Dimensions of connector with pin-centre contact – Limited detent and full
detent . 16
Table 10 – Dimensions of connector with pin-centre contact – Smooth bore . 17
Table 11 – Dimensions of connector with socket-centre contact . 18
Table 12 – Rating and characteristics . 19
Table 13 – Acceptance tests . 23
Table 14 – Periodic tests . 24

– 4 – 61169-44 © IEC:2012(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIO-FREQUENCY CONNECTORS –
Part 44: Sectional specification for series SMP
push-on radio-frequency coaxial connectors

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The f
...