EN 62149-2:2009
(Main)Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices
Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices
IEC 62149-2:2009(E) covers the performance specification for 850-nm discrete vertical cavity surface emitting laser (VCSEL) devices of transverse multimode types used for the fibre optic telecommunication and optical data transmission application. The performance standard contains a definition of the product performance requirements together with a series of sets of tests and measurements with clearly defined conditions, severities, and pass/fail criteria.
Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten - Teil 2: Oberflächenemittierende 850-nm-Laserbauelemente mit Vertikalresonator
Composants et dispositifs actifs à fibres optiques - Normes de fonctionnement - Partie 2: Dispositifs discrets à laser 850 nm émettant par la surface
Aktivne komponente in naprave optičnih vlaken - Izvedbeni standard - 2. del: Diskretni laserji s površinsko emisijo in navpičnim resonatorjem z valovno dolžino 850 nanometrov (IEC 62149-2:2009)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten - Teil 2: Oberflächenemittierende 850-nm-Laserbauelemente mit Vertikalresonator (IEC 62149-2:2009)Composants et dispositifs actifs à fibres optiques - Normes de fonctionnement - Partie 2: Dispositifs discrets à laser 850 nm émettant par la surface (CEI 62149-2:2009)Fibre optic active components and devices - Performance standard - Part 2: 850 nm discrete vertical cavity surface emitting laser devices (IEC 62149-2:2009)33.180.20Fibre optic interconnecting devicesICS:Ta slovenski standard je istoveten z:EN 62149-2:2009SIST EN 62149-2:2009en01-november-2009SIST EN 62149-2:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD EN 62149-2 NORME EUROPÉENNE
EUROPÄISCHE NORM September 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62149-2:2009 E
ICS 33.180.20
English version
Fibre optic active components and devices -
Performance standards -
Part 2: 850 nm discrete vertical cavity surface emitting laser devices (IEC 62149-2:2009)
Composants et dispositifs actifs
à fibres optiques -
Normes de fonctionnement -
Partie 2: Dispositifs discrets
à laser 850 nm émettant par la surface (CEI 62149-2:2009)
Aktive Lichtwellenleiterbauelemente
und -geräte -
Betriebsverhalten -
Teil 2: Oberflächenemittierende
850-nm-Laserbauelemente
mit Vertikalresonator (IEC 62149-2:2009)
This European Standard was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
- 2 -
Foreword The text of document 86C/886/FDIS, future edition 1 of IEC 62149-2, prepared by SC 86C, Fibre optic systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62149-2 on 2009-08-01. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2010-05-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2012-08-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 62149-2:2009 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60191 NOTE
Harmonized in EN 60191 series (not modified). IEC 60747-5-1 NOTE
Harmonized as EN 60747-5-1:2001 (not modified). IEC 60874 NOTE
Harmonized in EN 60874 series (not modified). IEC 62007-1 NOTE
Harmonized as EN 62007-1:2009 (not modified). IEC 62007-2 NOTE
Harmonized as EN 62007-2:2009 (not modified). IEC 62148-1 NOTE
Harmonized as EN 62148-1:2002 (not modified). IEC 62149-1 NOTE
Harmonized as EN 62149-1:2004 (not modified). __________
- 3 - EN 62149-2:2009
Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60749
Series Semiconductor devices - Mechanical and climatic test methods
EN 60749 Series
IEC 60825 Series Safety of laser products
EN 60825 Series
IEC 60950-1 (mod) -1) Information technology equipment - Safety - Part 1: General requirements EN 60950-1 + A11 20062) 2009
IEC 61300-2-4 -1) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 19972)
IEC 61300-2-19 -1) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 20052)
IEC 61300-2-48 -1) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 2-48: Tests - Temperature-humidity cycling EN 61300-2-48 20092)
IEC Guide 107 2009 Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications - -
1) Undated reference. 2) Valid edition at date of issue. SIST EN 62149-2:2009
IEC 62149-2Edition 1.0 2009-07INTERNATIONAL STANDARD
Fibre optic active components and devices – Performance standards –
Part 2: 850 nm discrete vertical cavity surface emitting laser devices
INTERNATIONAL ELECTROTECHNICAL COMMISSION RICS 33.180.20 PRICE CODEISBN 2-8318-1053-1
– 2 – 62149-2 © IEC:2009(E) CONTENTS FOREWORD.4 INTRODUCTION.6 1 Scope.7 2 Normative references.7 3 Terms, definitions, symbols and abbreviated terms.8 3.1 Terms and definitions.8 3.2 Symbols and abbreviated terms.8 4 Product parameters.9 4.1 Absolute limiting ratings.9 4.2 Operating environment.9 4.3 Functional specification.9 4.4 Diagrams.9 5 Testing.9 5.1 General.9 5.2 Characterization testing.10 5.3 Performance testing.10 6 Environmental specifications.10 6.1 General safety.10 6.2 Laser safety.10 6.3 Electromagnetic compatibility (EMC) requirements.10
Annex A (normative)
Specifications for multimode 850-nm VCSEL device without a monitor photodiode (Case a).11 Annex B (normative)
Specifications for multimode 850 nm VCSEL device with a monitor photodiode (Case b).15 Bibliography.20
Figure A.1 – 850 nm VCSEL TO CAN a) and pigtailed b) devices without a monitor photodiode.12 Figure B.1 – 850 nm VCSEL TO CAN a), pigtailed b)
and TOSA c) devices with a monitor photodiode.17
Table 1 – Operating environment.9 Table A.1 – Absolute limiting ratings.11 Table A.2 – Operating conditions for functional specification.11 Table A.3 – Functional specification.12 Table A.4 – Performance test plan.13 Table A.5 – Recommended performance test failure criteria.14 Table B.1 – Absolute limiting ratings.15 Table B.2 – Operating conditions for functional specification.15 Table B.3 – Functional specification.16 Table B.4 – Performance test plan.18 Table B.5 – Recommended performance test failure criteria.19
62149-2 © IEC:2009(E) – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PERFORMANCE STANDARDS –
Part 2: 850 nm discrete vertical cavity surface emitting laser devices
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62149-2 has been prepared by subcommittee 86C: Fibre optic systems and active devices, of IEC technical committee 86: Fibre optics. The text of this standard is based on the following documents: FDIS Report on voting 86C/886/FDIS 86C/914/RVD
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 62149 series, published under the general title Fibre optic active components and devices – Performance standards, can be found on the IEC website. SIS
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.