Industrial communication networks - Fieldbus specifications - Part 4-4: Data-link layer protocol specification - Type 4 elements

IEC 61158-4-4:2019 specifies procedures for the timely transfer of data and control information from one data-link user entity to a peer user entity, and among the data-link entities forming the distributed data-link service provider and the structure of the fieldbus DLPDUs used for the transfer of data and control information by the protocol of this standard, and their representation as physical interface data units. This third edition cancels and replaces the second edition published in 2014 and constitutes a technical revision. The main changes include the following significant technical changes with respect to the previous edition: a) additional user parameters to services; b) additional services to support distributed objects;c) additional secure services

Industrielle Kommunikationsnetze - Feldbusse - Teil 4-4: Protokollspezifikation des Data-Link Layer (Sicherungsschicht) - Typ 4-Elemente

Réseaux de communication industriels - Spécifications des bus de terrain - Partie 4-4: Spécification du protocole de la couche liaison de données - Eléments de type 4

IEC 61158-4-4:2019 La couche de liaison de données assure les communications de messagerie à contrainte de temps de base entre les appareils d'un environnement d'automatisation. Ce protocole fournit un moyen de connecter des appareils par le biais d'un réseau maillé partiel, de sorte que la plupart des défaillances d'une interconnexion entre deux appareils peuvent être contournées. Les appareils sont généralement interconnectés d'une manière hiérarchique non redondante qui reflète les besoins de l'application.

Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 4-4. del: Specifikacija protokola na ravni podatkovnih povezav - Elementi tipa 4 (IEC 61158-4-4:2019)

Nivo podatkovnih povezav omogoča osnovne časovno kritične sporočilne komunikacije med napravami v avtomatizacijskem okolju. Ta protokol omogoča način za povezovanje naprav prek delnega zankastega omrežja, tako da se je mogoče izogniti večini napak v medsebojnem povezovanju med napravama. Pri običajni praksi so naprave medsebojno povezane na neredundanten hierarhičen način, ki odraža potrebe aplikacije.

General Information

Status
Published
Publication Date
20-Jun-2019
Withdrawal Date
22-May-2022
Current Stage
6060 - Document made available - Publishing
Start Date
21-Jun-2019
Completion Date
21-Jun-2019

Relations

Buy Standard

Standard
EN IEC 61158-4-4:2019
English language
49 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61158-4-4:2019
01-november-2019
Nadomešča:
SIST EN 61158-4-4:2015
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 4-4. del:
Specifikacija protokola na ravni podatkovnih povezav - Elementi tipa 4 (IEC 61158-
4-4:2019)
Industrial communication networks - Fieldbus specifications - Part 4-4: Data-link layer
protocol specification - Type 4 elements (IEC 61158-4-4:2019)
Industrielle Kommunikationsnetze - Feldbusse - Teil 4-4: Protokollspezifikation des Data
Link Layer (Sicherungsschicht) - Typ 4-Elemente (IEC 61158-4-4:2019)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 4-4:
Spécification du protocole de la couche liaison de données - Eléments de type 4 (IEC
61158-4-4:2019)
Ta slovenski standard je istoveten z: EN IEC 61158-4-4:2019
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.20 Podatkovni povezovalni sloj Data link layer
35.110 Omreževanje Networking
SIST EN IEC 61158-4-4:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61158-4-4:2019

---------------------- Page: 2 ----------------------
SIST EN IEC 61158-4-4:2019


EUROPEAN STANDARD EN IEC 61158-4-4

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2019
Supersedes EN 61158-4-4:2014
ICS 25.040.40; 35.100.20; 35.110
English Version
Industrial communication networks - Fieldbus specifications -
Part 4-4: Data-link layer protocol specification - Type 4 elements
(IEC 61158-4-4:2019)
Réseaux de communication industriels - Spécifications des Industrielle Kommunikationsnetze - Feldbusse - Teil 4-4:
bus de terrain - Partie 4-4: Spécification du protocole de la Protokollspezifikation des Data Link Layer
couche liaison de données - Eléments de type 4 (Sicherungsschicht) - Typ 4-Elemente
(IEC 61158-4-4:2019) (IEC 61158-4-4:2019)
This European Standard was approved by CENELEC on 2019-05-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61158-4-4:2019 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61158-4-4:2019
EN IEC 61158-4-4:2019 (E)
European foreword
The text of document 65C/946/FDIS, future edition 3 of IEC 61158-4-4, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61158-4-4:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-02-23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-05-23
document have to be withdrawn

This document supersedes EN 61158-4-4:2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 61158-4-4:2019 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61158-1:2019 NOTE Harmonized as EN IEC 61158-1:2019 (not modified)
IEC 61158-2:2014 NOTE Harmonized as EN 61158-2:2014 (not modified)
IEC 61158-3-4:2019 NOTE Harmo
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.