EN 61784-5-10:2012
(Main)Industrial communication networks - Profiles - Part 5-10: Installation of fieldbuses - Installation profiles for CPF 10
Industrial communication networks - Profiles - Part 5-10: Installation of fieldbuses - Installation profiles for CPF 10
IEC 61784-5-10:2010 specifies the installation profiles for CPF 10 (Vnet/IP ).The installation profiles are specified in the annex. This annex is read in conjunction with IEC 61918:2010. This second edition cancels and replaces the first edition published in 2007. It constitutes an editorial revision. This edition does not include technical changes with respect to the previous edition. This bilingual version (2012-02) corresponds to the monolingual English version, published in 2010-07. This publication is to be read in conjunction with IEC 61918:2010.
Industrielle Kommunikationsnetze - Profile - Teil 5-10: Feldbusinstallation - Installationsprofile für die Kommunikationsprofilfamilie 10
Réseaux de communication industriels - Profils - Partie 5-10: Installation des bus de terrain - Profils d'installation pour CPF 10
La CEI 61784-5-10:2010 spécifie les profils d'installation applicables à la CPF 10 (Vnet/IP). Les profils d'installation sont spécifiés dans l'annexe. Cette annexe est lue conjointement à la CEI 61918:2010. Elle annule et remplace la première édition publiée en 2007, dont elle constitue une révision éditoriale. Cette édition ne comporte pas de modifications techniques par rapport à l'édition précédente. La présente version bilingue (2012-02) correspond à la version anglaise monolingue publiée en 2010-07. Cette publication doit être lue conjointement avec la CEI 61918:2010.
Industrijska komunikacijska omrežja - Profili - 5-10. del: Inštalacija procesnih vodil - Inštalacijski profili za CPF 10 (IEC 61784-5-10:2010)
Ta del standarda IEC 61784 določa inštalacijski profil za CPF 10 (Vnet/IP™)1. Inštalacijski profil je naveden v dodatku. Ta dodatek se navezuje na standard IEC 61918:2010.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2012
1DGRPHãþD
SIST EN 61784-5-10:2008
Industrijska komunikacijska omrežja - Profili - 5-10. del: Inštalacija procesnih vodil
- Inštalacijski profili za CPF 10 (IEC 61784-5-10:2010)
Industrial communication networks - Profiles - Part 5-10: Installation of fieldbuses -
Installation profiles for CPF 10 (IEC 61784-5-10:2010)
Industrielle Kommunikationsnetze - Profile - Teil 5-10: Feldbusinstallation -
Installationsprofile für die Kommunikationsprofilfamilie 10 (IEC 61784-5-10:2010)
Réseaux de communication industriels - Profils - Partie 5-10: Installation des bus de
terrain - Profils d'installation pour CPF 10 (CEI 61784-5-10:2010)
Ta slovenski standard je istoveten z: EN 61784-5-10:2012
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61784-5-10
NORME EUROPÉENNE
April 2012
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.40 Supersedes EN 61784-5-10:2008
English version
Industrial communication networks -
Profiles -
Part 5-10: Installation of fieldbuses -
Installation profiles for CPF 10
(IEC 61784-5-10:2010)
Réseaux de communication industriels - Industrielle Kommunikationsnetze -
Profils - Profile -
Partie 5-10: Installation des bus de terrain Teil 5-10: Feldbusinstallation -
- Installationsprofile für die
Profils d'installation pour CPF 10 Kommunikationsprofilfamilie 10
(CEI 61784-5-10:2010) (IEC 61784-5-10:2010)
This European Standard was approved by CENELEC on 2011-10-19. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61784-5-10:2012 E
Foreword
The text of document 65C/602/FDIS, future edition 2 of IEC 61784-5-10, prepared by SC 65C, "Industrial
networks", of IEC/TC 65, "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-5-10:2012.
The following dates are fixed:
(dop) 2012-10-20
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2014-10-19
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61784-5-10:2008.
This standard is to be used in conjunction with IEC 61918, second edition (2010-07), together with the
European Common Modification published with EN 61918:2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61784-5-10:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC/TR 61158-1 NOTE Harmonized as CLC/TR 61158-1.
- 3 - EN 61784-5-10:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 61918 2010 Industrial communication networks - - -
Installation of communication networks in
industrial premises
IEC 61784-5-10 ®
Edition 2.0 2010-07
INTERNATIONAL
STANDARD
colour
inside
Industrial communication networks – Profiles –
Part 5-10: Installation of fieldbuses – Installation profiles for CPF 10
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
R
ICS 25.040.40; 35.100.40 ISBN 978-2-88912-057-4
– 2 – 61784-5-10 © IEC:2010(E)
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
2 Normative references .6
3 Terms, definitions and abbreviated terms .6
4 CPF 10: Overview of installation profiles .6
5 Installation profile conventions .6
6 Conformance to installation profiles.7
Annex A (normative) CP 10/1 (Vnet/IP™) specific installation profile .8
Bibliography.19
Figure 1 – Standards relationships.5
Table A.1 – Network characteristics for balanced cabling based on Ethernet .10
Table A.2 – Network characteristics for optical fibre cabling.10
Table A.3 – Information relevant to copper cable: fixed cables.11
Table A.4 – Information relevant to copper cable: cords.12
Table A.5 – Information relevant to optical fibre cables .12
Table A.6 – Connectors for balanced cabling CPs based on Ethernet .13
Table A.7 – Optical fibre connecting hardware .14
61784-5-10 © IEC:2010(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL COMMUNICATION NETWORKS –
PROFILES –
Part 5-10: Installation of fieldbuses –
Installation profiles for CPF 10
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61784-5-10 has been prepared by subcommittee 65C: Industrial
networks, of IEC technical committee 65: Industrial-process measurement, control and
automation.
This second edition cancels and replaces the first edition published in 2007. This edition
constitutes an editorial revision.
This edition does not include technical changes with respect to the previous edition.
This standard is to be used in conjunction with IEC 61918:2010.
– 4 – 61784-5-10 © IEC:2010(E)
The text of this standard is based on the following documents:
FDIS Report on voting
65C/602/FDIS 65C/616/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 61784-5 series, published under the general title Industrial
communication networks – Profiles – Installation of fieldbuses, can be found on the IEC
website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
61784-5-10 © IEC:2010(E) – 5 –
INTRODUCTION
This International Standard is one of a series produced to facilitate the use of communication
networks in industrial control systems.
IEC 61918:2010 provides the common requirements for the installation of communication
networks in industrial control systems. This installation profile standard provides the
installation profiles of the communication profiles (CP) of a specific communication profile
family (CPF) by stating which requirements of IEC 61918 fully apply and, where necessary, by
supplementing, modifying, or replacing the other requirements (see Figure 1).
For general background on fieldbuses, their profiles, and relationship between the installation
profiles specified in this standard, see IEC/TR 61158-1.
Each CP installation profile is specified in a separate annex of this standard. Each annex is
structured exactly as the reference standard IEC 61918 for the benefit of the persons
representing the roles in the fieldbus installation process as defined in IEC 61918 (planner,
installe
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.