EN 60300-2:2004
(Main)Dependability management - Part 2: Guidelines for dependability management
Dependability management - Part 2: Guidelines for dependability management
Provides guidelines for dependability management of product design, development, evaluation and process enhancements. Life cycle models are used to describe product development or project phases. Applicable for detailed planning and implementation of a dependability programme to meet specific product needs.
Zuverlässigkeitsmanagement - Teil 2: Leitfaden zum Zuverlässigkeitsmanagement
Gestion de la sûreté de fonctionnement - Partie 2: Lignes directrices pour la gestion de la sûreté de fonctionnement
Fournit les lignes directrices pour la gestion de la sûreté de fonctionnement en matière de conception, de développement, d'évaluation du produit et d'amélioration du processus. Des modèles de cycle de vie sont utilisés pour décrire les phases de développement du produit ou du projet. La présente partie de la EN 60300 s'applique à une planification et une mise en uvre détaillées d'un programme de sûreté de fonctionnement destiné à répondre à des besoins spécifiques du produit.
Vodenje zagotovljivosti – 2. del: Program zagotovljivosti (IEC 60300- 2:2004)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2004
1DGRPHãþD
SIST EN 60300-2:2002
Vodenje zagotovljivosti – 2. del: Program zagotovljivosti (IEC 60300- 2:2004)
Dependability management -- Part 2: Guidelines for dependability management
Zuverlässigkeitsmanagement -- Teil 2: Leitfaden zum Zuverlässigkeitsmanagement
Gestion de la sûreté de fonctionnement -- Partie 2: Lignes directrices pour la gestion de
la sûreté de fonctionnement
Ta slovenski standard je istoveten z: EN 60300-2:2004
ICS:
03.120.01 Kakovost na splošno Quality in general
21.020 =QDþLOQRVWLLQQDþUWRYDQMH Characteristics and design of
VWURMHYDSDUDWRYRSUHPH machines, apparatus,
equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60300-2
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2004
ICS 03.100.40; 03.120.01 Supersedes EN 60300-2:1996
English version
Dependability management
Part 2: Guidelines for dependability management
(IEC 60300-2:2004)
Gestion de la sûreté de fonctionnement Zuverlässigkeitsmanagement
Partie 2: Lignes directrices pour la gestion Teil 2: Leitfaden zum
de la sûreté de fonctionnement Zuverlässigkeitsmanagement
(CEI 60300-2:2004) (IEC 60300-2:2004)
This European Standard was approved by CENELEC on 2004-04-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60300-2:2004 E
Foreword
The text of document 56/913/FDIS, future edition 2 of IEC 60300-2, prepared by IEC TC 56,
Dependability, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60300-2 on 2004-04-01.
This European Standard supersedes EN 60300-2:1996.
Significant technical changes with regard to EN 60300-2:1996 are:
a) structural and terminological alignment with ISO;
b) focus on system processes;
c) provision of additional guidelines in annexes to facilitate applications.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60300-2:2004 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60300-1 NOTE Harmonized as EN 60300-1:2003 (not modified).
IEC 60300-3-12 NOTE Harmonized as EN 60300-3-12:2004 (not modified).
IEC 60812 NOTE Harmonized as HD 485 S1:1987 (not modified).
IEC 61025 NOTE Harmonized as HD 617 S1:1992 (not modified).
IEC 61164 NOTE Harmnonized as EN 61164:2004 (not modified)
ISO 9000 NOTE Harmonized as EN ISO 9000:2000 (not modified).
__________
- 3 - EN 60300-2:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60300-3-1 2003 Dependability management - -
Part 3-1: Application guide - Analysis
techniques for dependability - Guide on
methodology
IEC 61014 1989 Programmes for reliability growth - -
ISO/IEC 15026 1998 Information technology - System and - -
software integrity levels
NORME
CEI
INTERNATIONALE IEC
60300-2
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2004-03
Gestion de la sûreté de fonctionnement –
Partie 2:
Lignes directrices pour la gestion
de la sûreté de fonctionnement
Dependability management –
Part 2:
Guidelines for dependability management
© IEC 2004 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
XA
Commission Electrotechnique Internationale PRICE CODE
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
Pour prix, voir catalogue en vigueur
For price, see current catalogue
60300-2 © IEC:2004 – 3 –
CONTENTS
FOREWORD.5
INTRODUCTION.9
1 Scope.11
2 Normative references .11
3 Terms and definitions .11
4 Dependability management system .19
5 Management responsibility .21
5.1 Management function on dependability.21
5.2 Meeting customer dependability needs.23
5.3 Dependability policy and regulatory implications.23
5.4 Dependability programmes .25
5.5 Management representative .25
5.6 Management review .25
6 Resource management.25
6.1 Provision of resources.25
6.2 Resource planning, development and maintenance .27
6.3 Outsourcing.29
7 Product realization .29
7.1 Planning for product realization .29
7.2 Tailoring of dependability programmes .31
7.3 Application of dependability plan .31
7.4 Supply-chain management .33
8 Measurement, analysis and improvement .33
8.1 Dependability measurement .33
8.2 Dependability monitoring and assurance .35
8.3 Dependability assessment and analysis .35
8.4 Use of dependability information .35
8.5 Measurement of results .37
8.6 Dependability improvement .39
Annex A (informative) Dependability programme elements and tasks for systems,
hardware and software applications .43
Annex B (informative) Product life cycle phases.71
Annex C (informative) Association of product life cycle phases with the applicable
dependability elements and tasks .75
Annex D (informative) Process steps and standards for managing dependability.79
Annex E (informative) Questions for dependability management review .85
Annex F (informative) Guidelines for the tailoring process.89
Annex G (informative) Classification of dependability standards with the life cycle
phases in which they are applicable.93
Bibliography.101
Figure 1 – Process steps for managing dependability.19
60300-2 © IEC:2004 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DEPENDABILITY MANAGEMENT –
Part 2: Guidelines for dependability management
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all s
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.