EN 60384-3:2006

Fixed capacitors for use in electronic equipment - Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte

IEC 60384-3:2006 applies to surface mount tantalum solid electrolyte capacitors. These capacitors are primarily intended to be mounted directly onto substrates for hybrid circuits or onto printed boards. The following two styles are considered: Style 1 - protected capacitors; Style 2 - unprotected capacitors. This third edition cancels and replaces the second edition published in 1989 and constitutes a minor revision related to tables, figures and references This bilingual version, published in 2008-06, corresponds to the English version.

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 3: Rahmenspezifikation: Oberflächenmontierbare Tantal-Kondensatoren mit festem Mangandioxid-Elektrolyt

Condensateurs fixes utilisés dans les équipements électroniques - Partie 3: Spécification intermédiaire: Condensateurs fixes électrolytiques au tantale pour montage en surface, à électrolyte solide au dioxyde de manganèse

La CEI 60384-3:2006 s'applique aux condensateurs au tantale pour montage en surface, à électrolyte solide. Ces condensateurs sont principalement destinés à être montés directement sur des substrats pour circuits hybrides ou sur des cartes imprimées. On considère les 2 modèles suivants: Modèle 1 - condensateurs protégés; Modèle 2 - condensateurs non protégés. Cette troisième édition annule et remplace la deuxième édition publiée en 1989. Elle constitue une révision mineure des tableaux, valeurs et références. La présente version bilingue correspond à la version anglaise.

Fiksni kondenzatorji za elektronsko opremo - 3. del: Področna specifikacija: Fiksni tantalovi elektrolitski kondenzatorji s trdnim elektrolitom iz manganovega dioksida za površinsko montažo (IEC 60384-3:2006)

General Information

• Status: Withdrawn
• Publication Date: 18-Dec-2006
• Withdrawal Date: 31-Oct-2009
• ICS: 31.060.40 - Tantalum electrolytic capacitors
• Technical Committee: CLC/TC 40XA - CLC/TC 40XA
• Drafting Committee: IEC/TC 40 - IEC_TC_40
• Parallel Committee: IEC/TC 40 - IEC_TC_40
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 16-Aug-2019
• Completion Date: 16-Aug-2019
• Ref Project: SIST EN 60384-3:2008 - Fixed capacitors for use in electronic equipment -- Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte

Relations

• Replaces: EN 130800:2000 - Sectional Specification: Tantalum surface mounting capacitors
• Effective Date: 29-Jan-2023
• Replaces: EN 130800:2000/A1:2003 - Sectional Specification: Tantalum surface mounting capacitors
• Effective Date: 29-Jan-2023
• Replaced By: EN 60384-3:2016 - Fixed capacitors for use in electronic equipment - Part 3: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with solid (MnO2) electrolyte
• Effective Date: 18-Oct-2016

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2008
)LNVQLNRQGHQ]DWRUML]DHOHNWURQVNRRSUHPRGHO3RGURþQDVSHFLILNDFLMD)LNVQL
WDQWDORYLHOHNWUROLWVNLNRQGHQ]DWRUMLVWUGQLPHOHNWUROLWRPL]PDQJDQRYHJDGLRNVLGD
]DSRYUãLQVNRPRQWDåR,(&
Fixed capacitors for use in electronic equipment - Part 3: Sectional specification: Surface
mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte
(IEC 60384-3:2006)
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 3:
Rahmenspezifikation: Oberflächenmontierbare Tantal-Kondensatoren mit festem
Mangandioxid-Elektrolyt (IEC 60384-3:2006)
Condensateurs fixes utilisés dans les équipements électroniques - Partie 3 :
Spécification intermédiaire : Condensateurs fixes électrolytiques au tantale pour
montage en surface a électrolyte solide en bioxyde de manganese (IEC 60384-3:2006)
Ta slovenski standard je istoveten z: EN 60384-3:2006
ICS:
31.060.40
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60384-3
NORME EUROPÉENNE
December 2006
EUROPÄISCHE NORM
ICS 31.060.40
English version
Fixed capacitors for use in electronic equipment
Part 3: Sectional specification: Surface mount fixed tantalum
electrolytic capacitors with manganese dioxide solid electrolyte
(IEC 60384-3:2006)
Condensateurs fixes utilisés dans  Festkondensatoren zur Verwendung
les équipements électroniques in Geräten der Elektronik
Partie 3: Spécification intermédiaire: Teil 3: Rahmenspezifikation:
Condensateurs fixes électrolytiques Oberflächenmontierbare
au tantale pour montage en surface Tantal-Kondensatoren mit festem
à électrolyte solide en bioxyde Mangandioxid-Elektrolyt
de manganèse (IEC 60384-3:2006)
(CEI 60384-3:2006)
This European Standard was approved by CENELEC on 2006-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60384-3:2006 E
Foreword
The text of document 40/1771/FDIS, future edition 3 of IEC 60384-3, prepared by IEC TC 40, Capacitors
and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 60384-3 on 2006-11-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60384-3:2006 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60384-3:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1) 2)
IEC 60062 (mod) - Marking codes for resistors and capacitors EN 60062 2005

1)
IEC 60063 - Preferred number series for resistors and - -
capacitors
1) 2)
IEC 60068-1 - Environmental testing EN 60068-1 1994
Part 1: General and guidance
1) 2)
IEC 60384-1 (mod) - Fixed capacitors for use in electronic EN 60384-1 2001
equipment + corr. October 2001
Part 1: Generic specification
1)
IEC 60410 - Sampling plans and procedures for inspection - -
by attributes
1)
ISO 3 - Preferred numbers - Series of preferred - -
numbers
1)
Undated reference.
2)
Valid edition at date of issue.

INTERNATIONAL IEC
STANDARD 60384-3
QC 300800
Third edition
2006-10
Fixed capacitors for use in electronic equipment –
Part 3:
Sectional specification: Surface mount fixed
tantalum electrolytic capacitors with manganese
dioxide solid electrolyte
© IEC 2006 ⎯ Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale U
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

– 2 – 60384-3 © IEC:2006(E)
CONTENTS
FOREWORD.4

1 General .6
1.1 Scope.6
1.2 Object .6
1.3 Normative references .6
1.4 Information to be given in a detail specification .6
1.5 Terms and definitions .7
1.6 Marking .8
2 Preferred ratings and characteristics .9
2.1 Preferred characteristics .9
2.2 Preferred values of ratings .10
3 Quality assessment procedures.11
3.1 Primary stage of manufacture.11
3.2 Structurally similar components.11
3.3 Certified records of released lots.11
3.4 Qualification approval.11
3.5 Quality conformance inspection.12
4 Test and measurement procedures.13
4.1 Preliminary drying .13
4.2 Measuring conditions .13
4.3 Mounting .13
4.4 Visual examination and check of dimensions.14
4.5 Electrical tests.14
4.6 Resistance to soldering heat .15
4.7 Solderability .16
4.8 Shear test .16
4.9 Substrate bending test .17
4.10 Rapid change of temperature .17
4.11 Climatic sequence (applicable to Style 1 capacitors only).17
4.12 Damp heat, steady state (applicable to Style 1 capacitors only).18
4.13 Characteristics at high and low temperature .18
4.14 Surge .18
4.15 Endurance.19
4.16 Reverse voltage (if required by the detail specification) .19
4.17 Component solvent resistance (if required by the detail specification) .20
4.18 Solvent resistance of the marking (if required by the detail specification) .20
4.19 High surge current (if required by the detail specification) .20

Annex A (normative) Test plans for assessment level EZ.21
Annex B (normative) Test schedule for assessment level EZ .24

60384-3 © IEC:2006(E) – 3 –
Table 1 – Category voltages .10
Table 2 – Test temperatures .19
Table A.1 – Test plan for qualification approval – Assessment level EZ .21
Table A.2 – Test plan for quality conformance inspection – Lot-by-lot tests –
Assessment level EZ .22
Table A.3 – Test plan for quality conformance inspection – Periodic tests –
Assessment level EZ .23
Table B.1 – Test schedule for qualification approval – Assessment level EZ .24

– 4 – 60384-3 © IEC:2006(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –

Part 3: Sectional specification: Surface mount fixed tantalum
electrolytic capacitors with manganese dioxide solid electrolyte

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its te
...