EN 60384-3-1:2006
(Main)Fixed capacitors for use in electronic equipment - Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ
Fixed capacitors for use in electronic equipment - Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ
IEC 60384-3-1:2006 is a bilingual version and corresponds to the English version. It is a supplementary document to the sectional specification and contains requirements for style, layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described. It cancels and replaces the first edition published in 1989 and constitutes a minor revision related to tables, figures and references.
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 3-1: Vordruck für Bauartspezifikation: Oberflächenmontierbare Tantal-Kondensatoren mit festem Mangandioxid-Elektrolyt - Qualitätsbewertungsstufe EZ
Condensateurs fixes utilisés dans les équipements électroniques - Partie 3-1: Spécification particulière cadre: Condensateurs fixes électrolytiques au tantale pour montage en surface, à électrolyte solide au dioxyde de manganèse - Niveau d’assurance EZ
La CEI 60384-3-1:2006 est une version bilingue et correspond à la version anglaise. Elle est un document annexe à la spécification intermédiaire qui contient des exigences pour le modèle, la disposition et le contenu minimum des spécifications particulières. Les spécifications particulières qui ne satisfont pas aux exigences peuvent ne pas être considérées comme conformes aux spécifications de la CEI et ne doivent pas être décrites comme telles. Elle annule et remplace la première édition publiée en 1989. Elle constitue une révision mineure des tableaux, valeurs et références.
Fiksni kondenzatorji za elektronsko opremo - 3-1. del: Okvirna podrobna specifikacija: Fiksni tantalovi elektrolitski kondenzatorji s trdnim elektrolitom iz manganovega dioksida za površinsko montažo - Ocenjevalni nivo EZ (IEC 60384-3-1:2006)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fixed capacitors for use in electronic equipment - Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ (IEC 60384-3-1:2006)Fiksni kondenzatorji za elektronsko opremo - 3-1. del: Okvirna podrobna specifikacija: Fiksni tantalovi elektrolitski kondenzatorji s trdnim elektrolitom iz manganovega dioksida za površinsko montažo - Ocenjevalni nivo EZ (IEC 60384-3-1:2006)Condensateurs fixes utilisés dans les équipements électroniques - Partie 3-1: Spécification particuliere cadre : Condensateurs fixes électrolytiques au tantale pour montage en surface a électrolyte solide en bioxyde de manganese - Niveau d’assurance de la qualité EZ (IEC 60384-3-1:2006Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 3-1: Vordruck für Bauartspezifikation: Oberflächenmontierbare Tantal-Kondensatoren mit festem Mangandioxid-Elektrolyt - Qualitätsbewertungsstufe EZ (IEC 60384-3-1:2006Ta slovenski standard je istoveten z:EN 60384-3-1:2006SIST EN 60384-3-1:2008en,de31.060.40ICS:SLOVENSKI
STANDARDSIST EN 60384-3-1:200801-februar-2008
EUROPEAN STANDARD EN 60384-3-1 NORME EUROPÉENNE
EUROPÄISCHE NORM December 2006
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60384-3-1:2006 E
ICS 31.060.30
English version
Fixed capacitors for use in electronic equipment
Part 3-1: Blank detail specification:
Surface mount fixed tantalum electrolytic capacitors
with manganese dioxide solid electrolyte -
Assessment level EZ (IEC 60384-3-1:2006)
Condensateurs fixes utilisés dans les équipements électroniques
Partie 3-1: Spécification particulière cadre: Condensateurs fixes électrolytiques
au tantale pour montage en surface
à électrolyte solide en bioxyde
de manganèse -
Niveau d’assurance de la qualité EZ (CEI 60384-3-1:2006)
Festkondensatoren zur Verwendung
in Geräten der Elektronik
Teil 3-1: Vordruck für Bauartspezifikation: Oberflächenmontierbare
Tantal-Kondensatoren mit festem Mangandioxid-Elektrolyt -
Qualitätsbewertungsstufe EZ (IEC 60384-3-1:2006)
This European Standard was approved by CENELEC on 2006-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
- 2 -
Foreword The text of document 40/1772/FDIS, future edition 2 of IEC 60384-3-1, prepared by IEC TC 40, Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60384-3-1 on 2006-11-01. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2007-08-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2009-11-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60384-3-1:2006 was approved by CENELEC as a European Standard without any modification. __________
- 3 - EN 60384-3-1:2006 Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60286-3 -1) Packaging of components for automatic handling
Part 3: Packaging of surface mount components on continuous tapes EN 60286-3 19982)
IEC 60384-1 (mod) -1) Fixed capacitors for use in electronic equipment
Part 1: Generic specification EN 60384-1 + corr. October
20012)2001
IEC 60384-3 -1) Fixed capacitors for use in electronic equipment
Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte EN 60384-3 20062)
IEC 60410 -1) Sampling plans and procedures for inspection by attributes - -
1) Undated reference. 2) Valid edition at date of issue.
INTERNATIONAL STANDARD IEC60384-3-1QC 300801 Second edition2006-10 Fixed capacitors for use in electronic equipment –Part 3-1: Blank detail specification: Surface mount
fixed tantalum electrolytic capacitors with
manganese dioxide solid electrolyte –
Assessment level EZ © IEC 2006
⎯
Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch
Web: www.iec.ch N For price, see current cataloguePRICE CODE
Commission Electrotechnique InternationaleInternational Electrotechnical Commission
– 2 – 60384-3-1 © IEC:2006(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 3-1: Blank detail specification:
Surface mount fixed tantalum electrolytic capacitors
with manganese dioxide solid electrolyte –
Assessment level EZ
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60384-3-1 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This second edition cancels and replaces the first edition published in 1989 and constitutes a minor revision related to tables, figures and references. The text of this standard is based on the following documents: FDIS Report on voting 40/1772/FDIS 40/1790/RVD
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. The QC numbers that appear on the front cover of this publication are the specification numbers in the IEC Quality Assessment System for Electronic Components (IECQ).
60384-3-1 © IEC:2006(E) – 3 –
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all the parts of the IEC 60384 series, under the (new) general title Fixed capacitors for use in electronic equipment, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will be
• reconfirmed, • withdrawn, • replaced by a revised edition, or • amended. A bilingual version of this publication may be issued at a later date.
– 4 – 60384-3-1 © IEC:2006(E)
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors
with manganese dioxide solid electrolyte – Assessment level EZ
INTRODUCTION Blank detail specification A blank detail specification is a supplementary document to the sectional specification and contains requirements for style, layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described. In the preparation of detail specifications, the content of 1.4 of the sectional specification shall be taken into account. The numbers between square brackets on the first page of the detail specification correspond to the following information, which shall be inserted in the position indicated. Identification of the detail specification [1] The “International Electrotechnical Commission” or the National Standards Organization under whose authority the detail specification is drafted. [2] The IEC or National Standards number of the detail specification, date of issue and any further information required by the national system. [3] The number and issue number of the IEC or national generic specification. [4] The IEC number of the blank detail specification. Identification of the capacitor [5] A short description of the type of capacitor. [6] Information on typical construction (when applicable). NOTE When the capacitor is not designed for use in printed circuit board applications, this is clearly stated in the detail specification in this position. [7] Outline drawing with main dimensions which are of importance for interchangeability and/or reference to the national or international documents for outlines. Alternatively, this drawing may be given in an annex to the detail specification. [8] Application or group of applications covered and/or assessment level. [9] Reference data on the most important properties, to allow comparison between the various capacitor types.
60384-3-1 © IEC:2006(E) – 5 –
[1]
IEC 60384-3-1-XXX [2] QC 300801-XXX
IEC 60384-3-1 [4] QC 300801
ELECTRONIC COMPONENTS OF ASSESSED QUALITY IN ACCORDANCE WITH: IEC 60384-1 IEC 60384-3
[3]
SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH MANGANESE DIOXIDE SOLID ELECTROLYTE [5]
[6]
OUTLINE DRAWING: (see Table 1)
(first angle projection)
[7]
(Other shapes are permitted within the dimensions given.)
ASSESSMENT LEVEL(S): EZ [8]
NOTE For [1] to [9]: see previous page.
[9]
Information on the availability of components qualified to this detail specification is given in the Qualified Products List. 1 General data 1.1 Recommended method of mounting (to be inserted) The capacitors are mounted by their terminations (see 1.3.2 and 4.3 of IEC 60384-3). 1.2 Dimensions Table 1 – Case-size reference and dimensions Dimensions
mm or inches and mm Case-size reference ∅ l h d .
When there is no case-size reference, Table 1 may be omitted and the dimensions shall be given in Table 2, which then becomes Table 1.
– 6 – 60384-3-1 © IEC:2006(E)
The dimensions shall be given as maximum dimensions or as nominal dimensions with a tolerance. 1.3 Ratings and characteristics
Capacitance range (see Table 2) Tolerance on rated capacitance Rated voltage (see Table 2) Category voltage (if applicable) (see Table 2) Climatic category Rated temperature Variation of capacitance with temperature (see Table 3) Tangent of loss angle Leakage current (see Table 3) Impedance (if applicable) (see Table 4) Equivalent series resistance (ESR) (if required) (see Table 5) Surge voltage
Table 2 – Values of capacitance and of voltage related to case sizes Rated voltage
Category voltagea
Case size Case size Case size Case size
Rated capacitance (in μF)
a If different from the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.