EN 60300-3-3:2004
(Main)Dependability management - Part 3-3: Application guide - Life cycle costing
Dependability management - Part 3-3: Application guide - Life cycle costing
Provides a general introduction to the concept of life cycle costing, covers all applications and particularly highlights the costs associated with dependability of the product. Explains the purpose and value of life cycle costing and outlines the general approaches involved. Identifies typical life cycle cost elements to facilitate project and programme planning. General guidance is provided for conducting a life cycle cost analysis, including life cycle cost model development. Illustrative examples are provided to explain the concepts.
Zuverlässigkeitsmanagement - Teil 3-3: Anwendungsleitfaden - Lebenszykluskosten
Gestion de la sûreté de fonctionnement - Partie 3-3: Guide d'application - Evaluation du coût de vie
Provides a general introduction to the concept of life cycle costing, covers all applications and particularly highlights the costs associated with dependability of the product. Explains the purpose and value of life cycle costing and outlines the general approaches involved. Identifies typical life cycle cost elements to facilitate project and programme planning. General guidance is provided for conducting a life cycle cost analysis, including life cycle cost model development. Illustrative examples are provided to explain the concepts.
Upravljanje zagotovljivosti - 3-3. del: Vodilo za uporabo - Izračun stroškov v življenjskem ciklu (IEC 60300-3-3:2004)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zuverlässigkeitsmanagement -- Teil 3-3: Anwendungsleitfaden - LebenszykluskostenGestion de la sûreté de fonctionnement -- Partie 3-3: Guide d'application - Evaluation du coût de vieDependability management -- Part 3-3: Application guide - Life cycle costing21.020Characteristics and design of machines, apparatus, equipment03.120.01Kakovost na splošnoQuality in generalICS:Ta slovenski standard je istoveten z:EN 60300-3-3:2004SIST EN 60300-3-3:2007en01-januar-2007SIST EN 60300-3-3:2007SLOVENSKI
STANDARD
EUROPEAN STANDARD
EN 60300-3-3 NORME EUROPÉENNE EUROPÄISCHE NORM
September 2004 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60300-3-3:2004 E
ICS 21.020
English version
Dependability management Part 3-3: Application guide –
Life cycle costing (IEC 60300-3-3:2004)
Gestion de la sûreté de fonctionnement Partie 3-3: Guide d'application - Evaluation du coût de vie (CEI 60300-3-3:2004)
Zuverlässigkeitsmanagement Teil 3-3: Anwendungsleitfaden - Lebenszykluskosten (IEC 60300-3-3:2004)
This European Standard was approved by CENELEC on 2004-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
at national level by publication of an identical
national standard or by endorsement
(dop)
2005-06-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2007-09-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60300-3-3:2004 was approved by CENELEC as a European Standard without any modification. __________ SIST EN 60300-3-3:2007
- 3 - EN 60300-3-3:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60050-191 1990 International Electrotechnical Vocabulary (IEV) Chapter 191: Dependability and quality of service
- - IEC 60300-3-12 - 1) Dependability management Part 3-12: Application guide - Integrated logistic support
EN 60300-3-12 2004 2) IEC 61703 - 1) Mathematical expressions for reliability, availability, maintainability and maintenance support terms
EN 61703 2002 2) IEC 62198 - 1) Project risk management - Application guidelines
- -
1) Undated reference. 2) Valid edition at date of issue. SIST EN 60300-3-3:2007
NORME INTERNATIONALECEIIEC INTERNATIONAL STANDARD 60300-3-3Deuxième éditionSecond edition2004-07 Gestion de la sûreté de fonctionnement – Partie 3-3: Guide d'application – Evaluation du coût du cycle de vie
Dependability management – Part 3-3: Application guide – Life cycle costing
Pour prix, voir catalogue en vigueur For price, see current catalogue IEC 2005
Droits de reproduction réservés
Copyright - all rights reserved Aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'éditeur. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch
Web: www.iec.ch CODE PRIX PRICE CODE XB Commission Electrotechnique InternationaleInternational Electrotechnical CommissionSIST EN 60300-3-3:2007
60300-3-3 IEC:2005 – 3 –
CONTENTS FOREWORD.7 INTRODUCTION.11
1 Scope.13 2 Normative references.13 3 Terms and definitions.13 4 Life cycle costing.15 4.1 Objectives of life cycle costing.15 4.2 Product life cycle phases and LCC.17 4.3 Timing of LCC analysis.19 4.4 Dependability and LCC relationship.19 4.4.1 General.19 4.4.2 Dependability related costs.21 4.4.3 Consequential costs.23 4.5 LCC concept.25 4.5.1 General.25 4.5.2 LCC breakdown into cost elements.27 4.5.3 Estimation of cost.31 4.5.4 Sensitivity analysis.37 4.5.5 Impact of discounting, inflation and taxation on LCC.37 4.6 Life cycle costing process.37 4.6.1 General.37 4.6.2 Life cycle costing plan.39 4.6.3 LCC model selection or development.39 4.6.4 LCC model application.39 4.6.5 Life cycle costing documentation.41 4.6.6 Review of life cycle costing results.43 4.6.7 Analysis update.43 4.7 Uncertainty and risks.43 5 LCC and environmental aspects.47
Annex A (informative)
Typical cost-generating activities.49 Annex B (informative)
LCC calculations and economic factors.55 Annex C (informative)
Example of a life cycle cost analysis.61 Annex D (informative)
Examples of LCC model development.107 Annex E (informative)
Example of a product breakdown structure
and LCC summary for a railway vehicle.123
Figure 1 – Sample applications of life cycle costing.19 Figure 2 – Typical relationship between dependability and
LCC for the operation and maintenance phase.21 Figure 3 – Cost element concept.29 Figure 4 – Example of cost elements used in the parametric cost method.33 SIST EN 60300-3-3:2007
60300-3-3 IEC:2005 – 5 –
Figure C.1 – Structure of DCN.63 Figure C.2 – Cost breakdown structure used for the example in Figure C.1.65 Figure C.3 – Definition of cost elements.71 Figure C.4 – Comparison of the costs of investment, annual operation and maintenance.89 Figure C.5 – Net present value (10 % discount rate).101 Figure C.6 – Net present value (5 % discount rate).103 Figure C.7 – NPV with improved data store reliability (5 % discount rate).105 Figure D.1 – Hierarchical structure.113 Figure E.1 – Vehicle system product breakdown structure.125
Table C.1 – First indenture level – Data communication network.67 Table C.2 – Second indenture level – Communication system.67 Table C.3 – Third indenture level – Power supply system.67 Table C.4 – Third indenture level – Main processor.67 Table C.5 – Third indenture level – Fan system.69 Table C.6 – Cost categories.69 Table C.7 – Investments in spare replaceable units.75 Table E.1 – Life cycle cost summary by Product Breakdown Structure.127
60300-3-3 IEC:2005 – 7 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
DEPENDABILITY MANAGEMENT –
Part 3-3: Application guide – Life cycle costing
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fee
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.