CLC/TR 60034-18-32:2004

Rotating electrical machines - Part 18-32: Functional evaluation of insulation systems - Test procedures for form-wound windings - Electrical evaluation of insulation systems used in machines up to and including 50 MVA and 15 kV

This publication has the status of a technical report - type 2.

Drehende elektrische Maschinen - Teil 18-32: Funktionelle Bewertung von Isoliersystemen - Prüfverfahren für Wicklungen mit vorgeformten Elementen - Elektrische Bewertung von Isoliersystemen für Maschinen bis 50 MVA und 15 kV

Machines électriques tournantes - Partie 18-32: Evaluation fonctionnelle des systèmes d'isolation - Procédures d'essai pour enroulements préformés - Evaluation électrique des systèmes d'isolation utilisés dans les machines jusqu'à et y compris 50 MVA et 15 kV

Cette publication a le statut d'un rapport technique - type 2

Električni rotacijski stroji - 18-32. del: Funkcionalno vrednotenje izolacijskih sistemov - Preskusni postopki za predhodno oblikovana navitja - Električno vrednotenje izolacijskih sistemov, ki se uporabljajo za stroje do vključno 50 MVA in 15 kV (IEC/TR 60034-18-32:1995)

General Information

• Status: Withdrawn
• Publication Date: 09-Sep-2004
• ICS: 29.080 - Insulation
• ICS: 29.160 - Rotating machinery
• Technical Committee: CLC/TC 2 - Rotating machinery
• Drafting Committee: IEC/TC 2 - IEC_TC_2
• Parallel Committee: IEC/SC 2J - IEC_SC_2J
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Dec-2013
• Completion Date: 01-Dec-2013
• Ref Project: SIST-TP CLC/TR 60034-18-32:2005 - Rotating electrical machines - Part 18-32: Functional evaluation of insulation systems - Test procedures for form-wound windings - Electrical evaluation of insulation systems used in machines up to and including 50 MVA and 15 kV (IEC/TR 60034-18-32:1995)

Relations

• Replaced By: EN 60034-18-32:2010 - Rotating electrical machines - Part 18-32: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation by electrical endurance
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CLC/TR 60034-18-32:2005
01-junij-2005
(OHNWULþQLURWDFLMVNLVWURMLGHO)XQNFLRQDOQRYUHGQRWHQMHL]RODFLMVNLK
VLVWHPRY3UHVNXVQLSRVWRSNL]DSUHGKRGQRREOLNRYDQDQDYLWMD(OHNWULþQR
YUHGQRWHQMHL]RODFLMVNLKVLVWHPRYNLVHXSRUDEOMDMR]DVWURMHGRYNOMXþQR09$
LQN9,(&75
Rotating electrical machines - Part 18-32: Functional evaluation of insulation systems -
Test procedures for form-wound windings - Electrical evaluation of insulation systems
used in machines up to and including 50 MVA and 15 kV (IEC/TR 60034-18-32:1995)
Drehende elektrische Maschinen -- Teil 18-32: Funktionelle Bewertung von
Isoliersystemen - Prüfverfahren für Wicklungen mit vorgeformten Elementen - Elektrische
Bewertung von Isoliersystemen für Maschinen bis 50 MVA und 15 kV (IEC/TR 60034-18
-32:1995)
Machines électriques tournantes - Partie 18-32: Evaluation fonctionnelle des systèmes
d'isolation - Procédures d'essai pour enroulements préformés - Evaluation électrique des
systèmes d'isolation utilisés dans les machines jusqu'à et y compris 50 MVA et 15 kV
(CEI/TR 60034-18-32:1995)
Ta slovenski standard je istoveten z: CLC/TR 60034-18-32:2004
ICS:
29.080.30 Izolacijski sistemi Insulation systems
29.160.01 Rotacijski stroji na splošno Rotating machinery in
general
SIST-TP CLC/TR 60034-18-32:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CLC/TR 60034-18-32:2005

---------------------- Page: 2 ----------------------

SIST-TP CLC/TR 60034-18-32:2005
TECHNICAL REPORT CLC/TR 60034-18-32
RAPPORT TECHNIQUE
TECHNISCHER BERICHT September 2004

ICS 29.080; 29.160


English version


Rotating electrical machines
Part 18-32: Functional evaluation of insulation systems -
Test procedures for form-wound windings -
Electrical evaluation of insulation systems used in machines
up to and including 50 MVA and 15 kV
(IEC/TR 60034-18-32:1995)


Machines électriques tournantes Drehende elektrische Maschinen
Partie 18-32: Evaluation fonctionnelle Teil 18-32: Funktionelle Bewertung
des systèmes d'isolation - von Isoliersystemen -
Procédures d'essai Prüfverfahren für Wicklungen
pour enroulements préformés - mit vorgeformten Elementen -
Evaluation électrique des systèmes Elektrische Bewertung von Isoliersystemen
d'isolation utilisés dans les machines für Maschinen bis 50 MVA und 15 kV
jusqu'à et y compris 50 MVA et 15 kV (IEC 60034-18-32:1995)
(CEI/TR 60034-18-32:1995)






This Technical Report was approved by CENELEC on 2004-07-03.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. CLC/TR 60034-18-32:2004 E

---------------------- Page: 3 ----------------------

SIST-TP CLC/TR 60034-18-32:2005
CLC/TR 60034-18-32:2004 - 2 -
Foreword
The text of the Technical Report IEC/TR 60034-18-32:1995, prepared by IEC TC 2, Rotating machinery,
was submitted to the formal vote and was approved by CENELEC as CLC/TR 60034-18-32 on
2004-07-03 without any modification.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the Technical Report IEC/TR 60034-18-32:1995 was approved by CENELEC as a Technical
Report without any modification.
__________

---------------------- Page: 4 ----------------------

SIST-TP CLC/TR 60034-18-32:2005
- 3 - CLC/TR 60034-18-32:2004
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60034-1 (mod) 1994 Rotating electrical machines EN 60034-1 1995
+ corr. December 1994 Part 1: Rating and performance + corr. April 1995

IEC 60034-15 1995 Part 15: Impulse voltage withstand EN 60034-15 1996
levels of rotating a.c. machines with
form-wound stator coils

IEC 60034-18-1 1992 Part 18: Functional evaluation of EN 60
...