EN 50632-1:2015
(Main)Electric motor-operated tools - Dust measurement Procedure - Part 1: General requirements
Electric motor-operated tools - Dust measurement Procedure - Part 1: General requirements
1.1 General This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected. 1.2 Types of dust Dust is a disperse distribution of solid substances in gases, particularly air, resulting from mechanical processes. According to EN 481, two size categories are to be differentiated: the inhalable dust and the respirable dust fraction. Inhalable dust refers to the entire inhalable fraction of the dust through mouth and/or nose. Respirable dust relates to the fraction of the inhalable dust that can reach the pulmonary alveoli due to its small particle size.
Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 1: Allgemeine Anforderungen
Outils électriques à moteur - Procédure de mesure de la poussière - Partie 1: Exigences générales
Elektromotorna orodja - Postopek meritve prahu - 1. del: Splošne zahteve
Ta evropski standard določa splošne zahteve za meritve prahu elektromotornih orodij, ki se napajajo iz omrežja ali baterij. Ta evropski standard velja za tista orodja, pri katerih se pričakuje nabiranje prahu (na primer mineralnega prahu, ki vsebuje kremenico, ali lesnega prahu), ne glede na to, ali so opremljeni z enoto za izločevanje prahu ali ne.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 50632-1:2015
01-december-2015
Elektromotorna orodja - Postopek meritve prahu - 1. del: Splošne zahteve
Electric motor-operated tools - Dust measurement Procedure - Part 1: General
requirement
Ta slovenski standard je istoveten z: EN 50632-1:2015
ICS:
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 50632-1:2015 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 50632-1:2015
---------------------- Page: 2 ----------------------
SIST EN 50632-1:2015
EUROPEAN STANDARD EN 50632-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2015
ICS 25.140.20
English Version
Electric motor-operated tools - Dust measurement Procedure -
Part 1: General requirements
Outils électriques à moteur - Procédure de mesure de la Motorbetriebene Elektrowerkzeuge - Staubmessverfahren -
poussière - Partie 1: Exigences générales Teil 1: Allgemeine Anforderungen
This European Standard was approved by CENELEC on 2015-08-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50632-1:2015 E
---------------------- Page: 3 ----------------------
SIST EN 50632-1:2015
EN 50632-1:2015 (E)
Contents
European foreword . 3
Introduction . 4
1 Scope . 5
1.1 General . 5
1.2 Types of dust . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Test procedure . 6
4.1 General . 6
4.2 Test room and equipment . 6
4.3 Operating conditions . 7
5 Instrumentation . 8
5.1 Instrumentation for measuring operating conditions . 8
5.2 Instrumentation for measuring climatic conditions . 8
6 Information to be reported . 8
2
---------------------- Page: 4 ----------------------
SIST EN 50632-1:2015
EN 50632-1:2015 (E)
European forew
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.