Comfort fans and regulators for household and similar purposes - Methods for measuring performance

Komfortventilatoren und Regler für den Hausgebrauch und ähnliche Zwecke – Verfahren zur Messung der Gebrauchseigenschaften

Ventilateurs de confort et régulateurs de vitesse pour applications domestiques et analogues - Méthodes de mesure de l'aptitude à la fonction

Dopolnilo 1 - Prezračevalni ventilatorji in regulatorji za gospodinjstvo in podobno uporabo - Metode za merjenje lastnosti - Dopolnilo A1

General Information

Status
Not Published
Publication Date
20-Oct-2025
Current Stage
4060 - Enquiry results established and sent to TC, SR, BTTF - Enquiry
Start Date
21-Jun-2024
Completion Date
21-Jun-2024

Relations

Buy Standard

Draft
EN 60879:2019/oprA1:2024
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2024
Dopolnilo 1 - Prezračevalni ventilatorji in regulatorji za gospodinjstvo in podobno
uporabo - Metode za merjenje lastnosti - Dopolnilo A1
Amendment 1 - Comfort fans and regulators for household and similar purposes -
Methods for measuring performance
Komfortventilatoren und Regler für den Hausgebrauch und ähnliche Zwecke – Verfahren
zur Messung der Gebrauchseigenschaften
Ventilateurs de confort et régulateurs de vitesse pour applications domestiques et
analogues - Méthodes de mesure de l'aptitude à la fonction
Ta slovenski standard je istoveten z: EN 60879:2019/prA1:2024
ICS:
23.120 Zračniki. Vetrniki. Klimatske Ventilators. Fans. Air-
naprave conditioners
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

59L/257/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60879/AMD1 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-03-29 2024-06-21
SUPERSEDES DOCUMENTS:
59L/245/CD, 59L/255/CC
IEC SC 59L : SMALL HOUSEHOLD APPLIANCES
SECRETARIAT: SECRETARY:
Italy Mr Davide Pietrosemoli
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

Other TC/SCs are requested to indicate their interest, if any, in this
CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of CENELEC,
is drawn to the fact that this Committee Draft for Vote (CDV) is
submitted for parallel voting.
The CENELEC members are invited to vote through the CENELEC
online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are aware
and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clau ses to be
included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC c lauses. (SEE
AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Amendment 1 - Comfort fans and regulators for household and similar purposes - Methods for measuring
performance
PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

IEC CDV 60879/AMD1 ED2 © IEC: 2024 - 2 - 59L/257/CDV

1 INTERNATIONAL ELECTROTECHNICAL COMMISSION
2 ____________
4 COMFORT FANS AND REGUALTORS
5 FOR HOUSESHOLD AND SIMILAR PURPOSES –
6 METHODS FOR MEASURING PERFORMANCE
10 FOREWORD
11 This amendment has been prepared by subcommittee SC59L: Small household appliances, of
12 IEC technical committee TC59: Performance of household and similar electrical appliances.
13 The text of this amendment is based on the following documents:
Draft Report on voting
XX/XX/FDIS XX/XX/RVD
15 Full information on the voting for its approval can be found in the report on voting indicated in
16 the above table.
17 The committee has decided that the contents of this document will remain unchanged until the
18 stability date indicated on the IEC website under webstore.iec.ch in the data related to the
19 specific document. At this date, the document will be
20 • reconfirmed,
21 • withdrawn,
22 • replaced by a revised edition, or
23 • amended.
26 ____________
59L/257/CDV - 3 - IEC CDV 60879/AMD1 ED2 © IEC: 2024

28 3 Terms and definitions
29 3.4
30 Replace the definition by the following:
31 comfort fan with concealed impeller to pressurize and inject air flow from non-free air ducting outlet
32 3.6
33 Replace the definition by the following:
34 conventional fan intended for use on a table
35 Note 1 to entry: Table fans have a maximum adjustable or non-adjustable height of less than 1 200 mm.
36 3.7
37 Replace the definition by the following:
38 conventional fan mounted on a pedestal of fixed or variable height
39 Note 1 to entry: Pedestal fans have a minimum adjustable height or non-adjustable height equal to or greater than 1 200 mm.
40 3.18
41 Replace the definition by the following:
42 A-weighted sound power level of the comfort fan while providing the maximum fan flow rate according
43 to IEC 60704-2-7
44 3.20
45 Replace the term and definition by the following:
46 desktop type bladeless fan
47 bladeless fan intended for use on a table
48 Note 1 to entry: desktop type bladeless fans have a maximum adjustable height or non-adjustable height less than 500 mm.
49 Add the following new entry:
50 3.21
51 floor type bladeless fan
52 bladeless fan intended for use on floor
53 Note 1 to entry: Floor type bladeless fans have a minimum adjustable height or non-adjustable height equal to or greater than
54 500 mm.
55 5 Tests
56 5.2.1.4  Procedure for test
57 Replace the text of the second paragraph by the following:
58 For the air velocity other than the origin point at axis of the fan blade (3 in Figure 2), the measurements
59 in each of four directions shall commence at a point 40 mm from the axis of the fan blades and shall
60 progress horizontally to the fan blade axis in increments of 80 mm along the semi-diagonals of the test
61 chamber (3 to A, 3 to B, 3 to AA and 3 to BB in Figure 2).The measurements shall be continued in the
62 80 mm increments until the air velocity in each of the four directions falls below 9 m/min.
63 Add
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.