iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN IEC 62282-2-100:2020/AC:2023-11

(Corrigendum)

Fuel cell technologies - Part 2-100: Fuel cell modules - Safety

Fuel cell technologies - Part 2-100: Fuel cell modules - Safety

Brennstoffzellentechnologien - Teil 2-100: Brennstoffzellenmodule - Sicherheit

Technologies des piles à combustible - Partie 2-100: Modules à piles à combustible - Sécurité

Tehnologije gorivnih celic - 2-100. del: Moduli gorivnih celic - Varnost - Popravek AC (IEC 62282-2-100:2020/COR1:2023)

General Information

Status
Published
Publication Date
23-Nov-2023
ICS
27.070 - Fuel cells
Technical Committee
CLC/SR 105 - Fuel cell technologies
Current Stage
6060 - Document made available - Publishing
Start Date
24-Nov-2023
Completion Date
24-Nov-2023
Ref Project
SIST EN IEC 62282-2-100:2020/AC:2024 - Fuel cell technologies - Part 2-100: Fuel cell modules - Safety (IEC 62282-2-100:2020/COR1:2023)

Relations

Corrects
EN IEC 62282-2-100:2020 - Fuel cell technologies - Part 2-100: Fuel cell modules - Safety
Effective Date
21-Nov-2023

Buy Standard

EN IEC 62282-2-100:2020/AC:2024EN IEC 62282-2-100:2020/AC:2024
PreviousNext
Corrigendum
EN IEC 62282-2-100:2020/AC:2024
English and French language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2024
Tehnologije gorivnih celic - 2-100. del: Moduli gorivnih celic - Varnost - Popravek
AC (IEC 62282-2-100:2020/COR1:2023)
Fuel cell technologies - Part 2-100: Fuel cell modules - Safety (IEC 62282-2-
100:2020/COR1:2023)
Brennstoffzellentechnologien - Teil 2-100: Brennstoffzellenmodule - Sicherheit (IEC
62282-2-100:2020/COR1:2023)
Technologies des piles à combustible - Partie 2-100: Modules à piles à combustible -
Sécurité (IEC 62282-2-100:2020/COR1:2023)
Ta slovenski standard je istoveten z: EN IEC 62282-2-100:2020/AC:2023-11
ICS:
27.070 Gorilne celice Fuel cells
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

NORME EUROPÉENNE EN IEC 62282-2-
100:2020/AC:2023-11
EUROPÄISCHE NORM
EUROPEAN STANDARD
Novembre 2023
ICS 27.070
Version française
Technologies des piles à combustible - Partie 2-100: Modules à
piles à combustible - Sécurité
(IEC 62282-2-100:2020/COR1:2023)
Brennstoffzellentechnologien - Teil 2-100: Fuel cell technologies - Part 2-100: Fuel cell modules -
Brennstoffzellenmodule - Sicherheit Safety
(IEC 62282-2-100:2020/COR1:2023) (IEC 62282-2-100:2020/COR1:2023)
Ce corrigendum prendra effet le 24 Novembre 2023 pour incorporation dans la version française de l'EN.

European Com
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62282-8-201:2024(Main)
Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems
SIST EN IEC 62282-8-201:2024

IEC 62282-8-201:2024 is available as IEC 62282-8-201:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62282-8-201:2024 defines the evaluation methods of typical performances for electric energy storage systems using hydrogen. It is applicable to the systems that use electrochemical reaction devices for both power charge and discharge. This document applies to systems that are designed and used for service and operation in stationary locations (indoor and outdoor). It specifies performance evaluation methods for electric energy storage systems using hydrogen that employ electrochemical reactions both for water and steam electrolysis and electric power generation. This document is intended for power-to-power systems which typically employ a set of electrolyser and fuel cell, or a reversible cell for devices of electric charge and discharge. This second edition cancels and replaces the first edition published in 2020. This edition includes the following significant technical changes with respect to the previous edition: a) consideration of systems connected to hydrogen supply infrastructure (hydrogen grids, vessels, caverns or pipelines); b) hydrogen input and output rate is added in the system parameters (5.10); c) electric energy storage capacity test is revised (6.2); d) roundtrip electrical efficiency test is revised (6.5); e) hydrogen input and output rate test is added (6.6.6).

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62282-6-107:2024(Main)
Fuel cell technologies - Part 6-107: Micro fuel cell power systems - Safety - Indirect water-reactive (Division 4.3) compounds
SIST EN IEC 62282-6-107:2024

IEC 62282-6-107:2024 covers micro fuel cell power systems, micro fuel cell power units and fuel cartridges using hydrogen produced from water-reactive (UN Division 4.3) compounds as fuel. These systems and units use proton exchange membrane (PEM) fuel cell technologies. The designs can include fuel processing subsystems to derive hydrogen gas from the water-reactive fuel formulation. This document only applies to water-reactive (UN Division 4.3) solid compounds which solely evolve hydrogen gas upon contact with water (or non-hazardous aqueous solutions). This document does not apply to compounds with a subsidiary hazard risk, or which are not permitted to be transported by air according to the International Civil Aviation Organization (ICAO) Technical Instructions.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62282-6-106:2024(Main)
Fuel cell technologies - Part 6-106: Micro fuel cell power systems - Safety - Indirect Class 8 (corrosive) compounds
SIST EN IEC 62282-6-106:2024

IEC 62282-6-106:2024 covers micro fuel cell power systems, micro fuel cell power units and fuel cartridges using hydrogen produced from UN Class 8 (corrosive) borohydride formulations as fuel. These systems and units use proton exchange membrane (PEM) fuel cell technologies. The designs include fuel processing subsystems to derive hydrogen gas from the corrosive fuel formulation. This first edition, together with the other parts of the IEC 62282-6-1XX series, cancels and replaces IEC 62282-6-100:2010 and IEC 62282-6-100:2010/AMD1:2012.This edition includes the following significant technical changes with respect to IEC 62282‑6‑100:2010 and IEC 62282-6-100:2010/AMD1:2012: a) A new structure has been set up: IEC 62282-6-101 covers the general safety requirements common to all fuel types whereas IEC 62282-6-102 and subsequent parts of the IEC 62282-6-1XX series cover particular requirements for individual fuel types.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62282-6-101:2024(Main)
Fuel cell technologies - Part 6-101: Micro fuel cell power systems - Safety - General requirements
SIST EN IEC 62282-6-101:2024

IEC 62282-6-101:2024 covers micro fuel cell power systems and fuel cartridges that are wearable or easily carried by hand, providing direct current outputs that do not exceed 60 V DC and power outputs that do not exceed 240 VA. Portable fuel cell power systems that provide output levels that exceed these electrical limits are covered by IEC 62282-5-100. This document covers micro fuel cell power systems and fuel cartridges. This document establishes the requirements for micro fuel cell power systems and fuel cartridges to ensure a reasonable degree of safety for normal use, reasonably foreseeable misuse, and cargo and consumer transportation and storage of such items. . Fuel cartridges refilled by the manufacturer or by trained technicians are covered by this document. The fuel cartridges covered by this document are not intended to be refilled by the consumer. This first edition, together with the other parts of the IEC 62282-6-1XX series, cancels and replaces IEC 62282-6-100:2010 and IEC 62282-6-100:2010/AMD1:2012. This edition includes the following significant technical changes with respect to IEC 62282‑6‑100:2010 and IEC 62282-6-100:2010/AMD1:2012: a) A new structure has been set up: IEC 62282-6-101 covers the general safety requirements common to all fuel types whereas IEC 62282-6-102 and subsequent parts of the IEC 62282‑6-1XX series cover particular requirements for specific fuel types based on the requirements given in IEC 62282-6-101.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62282-4-202:2023(Main)
Fuel cell technologies - Part 4-202: Fuel cell power systems for propulsion and auxiliary power units - Unmanned aircrafts - Performance test methods
SIST EN IEC 62282-4-202:2024

IEC 62282-4-202:2023 covers performance test methods of fuel cell power systems intended to be used to power unmanned aircrafts, including general requirements, start-up, shutdown, power output, continuous running time, electric efficiency, data transmission, warning and monitoring, environmental compatibility, etc. The scope of this document is limited to electrically powered unmanned aircrafts with a maximum take-off mass not exceeding 150 kg (i.e. level 5 or lower unmanned aircrafts (UAs)). This document applies to fuel cell power systems with a rated output voltage not exceeding 220 V DC for outdoor use. This document applies only to compressed gaseous hydrogen-fuelled fuel cell power systems.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62282-8-301:2023(Main)
Fuel cell technologies - Part 8-301: Energy storage systems using fuel cell modules in reverse mode - Power-to-methane energy systems based on solid oxide cells including reversible operation - Performance test methods
SIST EN IEC 62282-8-301:2023

IEC 62282-8-301:2023 specifies performance test methods of power-to-methane systems based on solid oxide cells (SOCs). Water, CO2, and electricity are supplied to the system to produce methane and oxygen. This document is not intended to be applied to solid oxide fuel cell (SOFC) cell/stack assembly units for power generation purposes only, since these are covered in IEC 62282-7-2. In addition, the test methods for SOC cell/stack assembly units including reversible operation (without any methanation reactor) are already described in IEC 62282-8-101. This document is intended to be used for data exchanges in commercial transactions between the system manufacturers and customers. Users of this document can selectively execute test items suitable for their purposes from those described in this document.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62282-4-102:2023(Main)
Fuel cell technologies - Part 4-102: Fuel cell power systems for electrically powered industrial trucks - Performance test methods
SIST EN IEC 62282-4-102:2023

IEC 62282-4-102:2022 is available as IEC 62282-4-102:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62282-4-102:2022 specifies the performance test methods of fuel cell power systems for propulsion and auxiliary power units (APU). This document covers fuel cell power systems for propulsion other than those for road vehicles. This document applies to gaseous hydrogen-fuelled fuel cell power systems and direct methanol fuel cell power systems for electrically powered industrial trucks. The following fuels are considered within the scope of this document: - gaseous hydrogen, and - methanol. This document covers the fuel cell power system as defined in 3.7 and Figure 1. This document applies to DC type fuel cell power systems, with a rated output voltage not exceeding DC 150 V for indoor and outdoor use. This document covers fuel cell power systems whose fuel source container is permanently attached to either the industrial truck or the fuel cell power system. This second edition cancels and replaces the first edition published in 2017. This edition includes the following significant technical changes with respect to the previous edition: a. alignment of the Scope with the second edition of IEC 62282-4-101:2022; b. deletion of terms and definitions (previous entries 3.5, 3.10, and 3.15); c. addition of new terms in Clause 3: "delivered power" (3.13) and "regenerated power" (3.14); d. revision of symbols and their meanings in alignment with those of IEC 62282-3-201; e. replacement of "reference conditions" with "standard conditions" as seen in Clause 5; f. revision of the test method for the accessory load voltage spike test (13.3.2); g. addition of clarifications in Clause 14 (Power stability under operation); h. addition of a checklist for performance criteria dealt with in this document (Annex C).

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62282-4-600:2022(Main)
Fuel cell technologies - Part 4-600: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Fuel cell/battery hybrid systems performance test methods for excavators
SIST EN IEC 62282-4-600:2022

IEC 62282-4-600:2022 covers the requirements for the performance test methods of fuel cell/battery hybrid systems intended to be used for electrically powered applications for excavators. For this purpose, this document covers electrical performance and vibration tests for the fuel cell/battery hybrid system. This document also covers performance test methods which focus on vibration and other characteristics for balance of plant (BOP) installed in heavy-duty applications with fuel cell/battery hybrid system. This document applies to both gaseous hydrogen-fuelled fuel cell power, liquid hydrogen-fuelled fuel cell power, direct methanol fuel cell power and battery hybrid power pack systems.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62282-4-101:2022(Main)
Fuel cell technologies - Part 4-101: Fuel cell power systems for electrically powered industrial trucks - Safety
SIST EN IEC 62282-4-101:2022

This document deals with safety of fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). This part of IEC 62282 covers safety requirements for fuel cell power systems intended to be used in electrically powered industrial trucks as defined in ISO 5053-1, except for: - rough-terrain trucks; - non-stacking low-lift straddle carriers; - stacking high-lift straddle carriers; - rough-terrain variable-reach trucks; - slewing rough-terrain variable-reach trucks; - variable-reach container handlers; - pedestrian propelled trucks. This document applies to gaseous hydrogen-fuelled fuel cell power systems and direct methanol fuel cell power systems for electrically powered industrial trucks. The following fuels are considered within the scope of this document: - gaseous hydrogen; - methanol. This document covers the fuel cell power system as defined in 3.8 and Figure 1. This document applies to DC type fuel cell power systems, with a rated output voltage not exceeding 150 V DC for indoor and outdoor use. This document covers fuel cell power systems whose fuel source container is permanently attached to either the industrial truck or the fuel cell power system. In accordance with IEC Guide 116, significant hazards, hazardous situations and events dealt with in this document are shown in Annex B. The following are not included in the scope of this document: - detachable type fuel source containers; - hybrid trucks that include an internal combustion engine; - reformer-equipped fuel cell power systems; - fuel cell power systems intended for operation in potentially explosive atmospheres; - fuel storage systems using liquid hydrogen. [Figure 1]

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62282-3-201:2017/A1:2022(Amendment)
Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
SIST EN 62282-3-201:2018/A1:2022

No scope available

  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day