EN 60763-3-1:2011

Laminated pressboard for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for laminated precompressed pressboard, Types LB 3.1A.1 and LB3.1A.2

IEC 60763-3-1:2010 gives the requirements for laminated precompressed boards comprised of 100 % sulphate wood pulp. The main changes with respect to the previous edition are: - requirements for the new properties in Part 2 have been integrated; - specifications for type LB3.3.1 and LB3.3.2 have been deleted.

Blockspan für elektrotechnische Anwendungen - Teil 3: Bestimmungen für einzelne Werkstoffe - Blatt 1: Anforderungen für heißgepressten Blockspan, Typen LB 3.1A.1 und LB 3.1A.2

Cartons comprimés et contrecollés à usages électriques - Partie 3: Spécifications pour matériaux particuliers - Feuille 1: Exigences relatives aux cartons précomprimés contrecollés, Types LB 3.1A.1 et 3.1A.2

La CEI 60763-3-1:2010 contient les exigences relatives aux cartons précomprimés et contrecollés composés de 100 % de pâte de bois au sulfate. Les principales modifications par rapport à l'édition précédente sont: - les exigences relatives aux nouvelles propriétés de la Partie 2 ont été intégrées; - les spécifications relatives aux types LB3.3.1 et LB3.3.2 ont été supprimées.

Večplastni prešpanski papir za elektrotehniko - 3. del: Specifikacije za posamezne materiale - 1. list: Zahteve za večplastni predstisnjeni prešpanski papir tipov LB 3.1A.1 in 3.1A.2 (IEC 60763-3-1:2010)

Ta delovni list IEC 60763-3 podaja zahteve za večplastne predstisnjene kartone, sestavljene iz 100-odstotne sulfatne lesne pulpe. Materiali, skladni s to specifikacijo, ustrezajo vzpostavljenim ravnem delovanja. Vendar mora uporabnik material za določeno uporabo izbrati na podlagi dejanskih zahtev za ustrezno delovanje pri taki uporabi, ne le na podlagi same specifikacije.

General Information

• Status: Published
• Publication Date: 03-Feb-2011
• Withdrawal Date: 01-Jan-2014
• ICS: 29.035.10 - Paper and board insulating materials
• Technical Committee: CLC/SR 15 - Insulating materials
• Drafting Committee: IEC/TC 15 - IEC_TC_15
• Parallel Committee: IEC/TC 15 - IEC_TC_15
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 04-Feb-2011
• Completion Date: 04-Feb-2011
• Ref Project: SIST EN 60763-3-1:2011 - Laminated pressboard for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for laminated precompressed pressboard, Types LB 3.1A.1 and LB3.1A.2 (IEC 60763-3-1:2010)

Relations

• Replaces: EN 60763-3-1:1996 - Specification for laminated pressboard - Part 3: Specifications for individual materials - Sheet 1: Specifications for laminated precompressed board - Types LB 3.1.1, 3.1.2, 3.3.1 and 3.3.2
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2011
1DGRPHãþD
SIST EN 60763-3-1:1998
9HþSODVWQLSUHãSDQVNLSDSLU]DHOHNWURWHKQLNRGHO6SHFLILNDFLMH]DSRVDPH]QH
PDWHULDOHOLVW=DKWHYH]DYHþSODVWQLSUHGVWLVQMHQLSUHãSDQVNLSDSLUWLSRY/%
$LQ$,(&
Laminated pressboard for electrical purposes - Part 3: Specifications for individual
materials - Sheet 1: Requirements for laminated precompressed pressboard, Types LB
3.1A.1 and LB3.1A.2 (IEC 60763-3-1:2010)
Blockspan für elektrotechnische Anwendungen - Teil 3: Bestimmungen für einzelne
Werkstoffe - Blatt 1: Anforderungen für heißgepressten Blockspan, Typen LB 3.1A.1 und
LB 3.1A.2 (IEC 60763-3-1:2010)
Cartons comprimés et contrecollés à usages électriques - Partie 3: Spécifications pour
matériaux particuliers - Feuille 1: Exigences relatives aux cartons précomprimés
contrecollés, Types LB 3.1A.1 et 3.1A.2 (CEI 60763-3-1:2010)
Ta slovenski standard je istoveten z: EN 60763-3-1:2011
ICS:
29.035.10 Papirni in kartonski izolacijski Paper and board insulating
materiali materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60763-3-1
NORME EUROPÉENNE
February 2011
EUROPÄISCHE NORM
ICS 29.035.10 Supersedes EN 60763-3-1:1996

English version
Laminated pressboard for electrical purposes -
Part 3: Specifications for individual materials -
Sheet 1: Requirements for laminated precompressed pressboard, Types
LB 3.1A.1 and LB3.1A.2
(IEC 60763-3-1:2010)
Cartons comprimés et contrecollés à Blockspan für elektrotechnische
usages électriques - Anwendungen -
Partie 3: Spécifications pour matériaux Teil 3: Bestimmungen für einzelne
particuliers - Werkstoffe -
Feuille 1: Exigences relatives aux cartons Blatt 1: Anforderungen für heißgepressten
précomprimés contrecollés, Types LB Blockspan, Typen LB 3.1A.1
3.1A.1 et 3.1A.2 und LB 3.1A.2
(CEI 60763-3-1:2010) (IEC 60763-3-1:2010)

This European Standard was approved by CENELEC on 2011-01-02. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60763-3-1:2011 E
Foreword
The text of document 15/537/CDV, future edition 2 of IEC 60763-3-1, prepared by IEC TC 15, Solid
electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60763-3-1 on 2011-01-02.
This European Standard supersedes EN 60763-3-1:1996.
The main changes with respect to EN 60763-3-1:1996 are listed below:
– requirements for the new properties in Part 2 have been integrated;
– specifications for type LB3.3.1 and LB3.3.2 have been deleted.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-10-02
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2014-01-02
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60763-3-1:2010 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60763-3-1:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60763-1 2010 Laminated pressboard for electrical EN 60763-1 2011
purposes -
Part 1: Definitions, classification and general
requirements
IEC 60763-2 2007 Specification for laminated pressboard - EN 60763-2 2007
Part 2: Methods of test
IEC 60763-3-1 ®
Edition 2.0 2010-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Laminated pressboard for electrical purposes –
Part 3: Specifications for individual materials – Sheet 1: Requirements for
laminated precompressed pressboard, Types LB3.1A.1 and LB3.1A.2

Cartons comprimés et contrecollés à usages électriques –
Partie 3: Spécifications pour matériaux particuliers – Feuille 1: Exigences
relatives aux cartons précomprimés contrecollés, Types LB3.1A.1 et 3.1A.2

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
E
CODE PRIX
ICS 29.035.10 ISBN 978-2-88912-144-1
– 2 – 60763-3-1 © IEC:2010
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LAMINATED PRESSBOARD FOR ELECTRICAL PURPOSES –

Part 3: Specifications for individual materials –
Sheet 1: Requirements for laminated precompressed pressboard,
Types LB3.1A.1 and LB3.1A.2
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end a
...