Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers

IEC 60819-3-3:2011 is a sheet of IEC 60819-3 specifies requirements for four types of unfilled aramid papers: - Type 1: calendered paper; - Type 2: calendered paper, with improved tearing resistance and conformability; - Type 3: uncalendered paper; - Type 4: calendered paper, with lower density for laminating. This edition includes the following significant technical changes with respect to the previous edition: - normative references change: all the requirements are now determined according the clauses of test methods from IEC 60819-2 specific for non cellulosic papers, instead of IEC 60554-2:2001 generally valid for cellulosic papers; - and some new, very thin thicknesses, of type 4, calendered paper with lower density for laminating, were added.

Zellulosefreie Papiere für elektrotechnische Zwecke - Teil 3: Bestimmungen für einzelne Materialien - Blatt 3: Ungefüllte Aramid-(aromatische Polyamid-)Papiere

Papiers non cellulosiques pour usages électriques - Partie 3: Spécifications pour matériaux particuliers - Feuille 3: Papiers en aramide non chargé (polyamide aromatique)

La CEI 60819-3-3:2011 est une feuille de la CEI 60819-3 qui spécifie les exigences pour quatre types de papiers en aramide non chargé:
- Type 1: papier calandré; - Type 2: papier calandré, avec une résistance au déchirement et une adaptabilité améliorées; - Type 3: papier non calandré; - Type 4: papier calandré, avec une densité plus faible de stratification. Cette édition inclut les modifications techniques significatives suivantes par rapport à l'édition précédente: - modification des références normatives: toutes les exigences sont à présent déterminées conformément aux articles des méthodes d'essai figurant dans la CEI 60819-2 spécifique aux papiers non cellulosiques, au lieu de la CEI 60554-2:2001 généralement valable pour les papiers cellulosiques; - certains nouveaux papiers calandrés, d'épaisseurs très minces, de type 4, avec une densité plus faible de stratification, ont été ajoutés.

Necelulozni papirji za elektrotehniko - 3. del: Specifikacije za posamezne materiale - 3. list: Nepolnjeni aramidni (aromatični poliamidni) papirji

Ta delovni list IEC 60819-3 določa zahteve za štiri tipe nepolnjenih aramidnih papirjev: Tip 1: kalandrski papir; Tip 2: kalandrski papir z izboljšano odpornostjo proti trganju in prilagodljivostjo; Tip 3: nekalandrski papir; Tip 4: kalandrski papir z nižjo gostoto za laminiranje. Materiali, skladni s to specifikacijo, ustrezajo vzpostavljenim ravnem delovanja. Vendar mora uporabnik material za določeno uporabo izbrati na podlagi dejanskih zahtev za ustrezno delovanje pri taki uporabi in ne le na podlagi same specifikacije.

General Information

Status
Withdrawn
Publication Date
17-Jan-2012
Withdrawal Date
17-Oct-2014
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
28-Oct-2011
Completion Date
28-Oct-2011

Relations

Buy Standard

Standard
EN 60819-3-3:2012
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vliesstoffe auf Kunststofffaserbasis für elektrotechnische Zwecke - Teil 3: Bestimmungen für einzelne Materialien - Blatt 3: Ungefüllte Aramid (aromatische Polyamid) PapierePapiers non cellulosiques pour usages électriques - Partie 3: Spécifications pour matériaux particuliers - Feuille 3: Papiers en aramide non chargé (polyamide aromatique)Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials Sheet 3: Unfilled aramid (aromatic polyamide) papers29.035.10Papirni in kartonski izolacijski materialiPaper and board insulating materialsICS:Ta slovenski standard je istoveten z:EN 60819-3-3:2011SIST EN 60819-3-3:2012en01-januar-2012SIST EN 60819-3-3:2012SLOVENSKI

STANDARD
SIST EN 60819-3-3:2012
EUROPEAN STANDARD EN 60819-3-3 NORME EUROPÉENNE
EUROPÄISCHE NORM October 2011

CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC -

All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60819-3-3:2011 E
ICS 29.035.10 Supersedes EN 60819-3-3:2006
English version
Non-cellulosic papers for electrical purposes -
Part 3: Specifications for individual materials -
Sheet 3: Unfilled aramid (aromatic polyamide) papers (IEC 60819-3-3:2011)
Papiers non cellulosiques pour usages électriques -
Partie 3: Spécifications pour matériaux particuliers -

Feuille 3: Papiers en aramide non chargé (polyamide aromatique) (CEI 60819-3-3:2011)

Zellulosefreie Papiere für elektrotechnische Zwecke -
Teil 3: Bestimmungen für einzelne Materialien -
Blatt 3: Ungefüllte Aramid-(aromatische Polyamid-)Papiere (IEC 60819-3-3:2011)

This European Standard was approved by CENELEC on 2011-10-18. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

SIST EN 60819-3-3:2012

EN 60819-3-3:2011 - 2 - Foreword The text of document 15/619/CDV, future edition 3 of IEC 60819-3-3, prepared by IEC TC 15, "Solid electrical insulating materials", was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60819-3-3:2011. The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-07-18 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2014-10-18

This document supersedes EN 60819-3-3:2006.

EN 60819-3-3:2011 includes the following significant technical changes with respect to

EN 60819-3-3:2006: – normative references change: all the requirements are now determined according the clauses of test methods from EN 60819-2 specific for non cellulosic papers, instead of EN 60554-2:2002 generally valid for cellulosic papers; – some new, very thin thicknesses, of type 4, calendered paper with lower density for laminating, were added.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60819-3-3:2011 was approved by CENELEC as a European Standard without any modification. SIST EN 60819-3-3:2012

- 3 - EN 60819-3-3:2011 Annex ZA (normative)

Normative references to international publications with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

NOTE

When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.

Publication Year Title EN/HD Year

IEC 60819-1 - Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements EN 60819-1 -

IEC 60819-2 2001 Non-cellulosic papers for electrical purposes - Part 2: Methods of test EN 60819-2 2001

ISO 186 2002 Paper and board - Sampling to determine average quality EN ISO 186 2002

SIST EN 60819-3-3:2012
SIST EN 60819-3-3:2012

IEC 60819-3-3 Edition 3.0 2011-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Non-cellulosic papers for electrical purposes –

Part 3: Specifications for individual materials – Sheet 3: Unfilled aramid (aromatic polyamide) papers

Papiers non cellulosiques pour usages électriques –

Partie 3: Spécifications pour matériaux particuliers – Feuille 3: Papiers en aramide non chargé (polyamide aromatique)

INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE H ICS 29.035.10 PRICE CODE CODE PRIX ISBN 978-2-88912-686-6

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale ®
SIST EN 60819-3-3:2012

– 2 – 60819-3-3  IEC:2011 INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________

NON-CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES –
Part 3: Specifications for individual materials –
Sheet 3: Unfilled aramid (aromatic polyamide) papers

FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.