EN 62759-1:2015
(Main)Photovoltaic (PV) modules - Transportation testing - Part 1: Transportation and shipping of module package units
Photovoltaic (PV) modules - Transportation testing - Part 1: Transportation and shipping of module package units
IEC 62759-1:2015 describes methods for the simulation of transportation of complete package units of modules and combined subsequent environmental impacts. This standard is designed so that its test sequence can co-ordinate with those of IEC 61215 or IEC 61646, so that a single set of samples may be used to perform both the transportation simulation and performance evaluation of a photovoltaic module design.
Photovoltaik(PV)-Module - Transportprüfung - Teil 1: Transport und Versand von PV-Modulpaketen
Modules photovoltaïques (PV) - Essais de transport - Partie 1: Transport et expédition d'unités d'emballage de modules
L'IEC 62759-1:2015 décrit les méthodes de simulation de transport de l'ensemble des unités d'emballage des modules et des impacts environnementaux résultants combinés. La présente norme est conçue pour que sa séquence d'essai puisse être coordonnée avec celles de l'IEC 61215 ou de l'IEC 61646, de sorte qu'un seul ensemble d'échantillons puisse être utilisé pour effectuer la simulation du transport et l'évaluation des performances de la conception d'un module photovoltaïque.
Preskušanje prevoza fotonapetostnih (PV) modulov - 1. del: Prevoz in dobava skladov fotonapetostnih modulov
Fotonapetostni sistemi (PV) so električne naprave, ki so skozi svojo celotno življenjsko dobo stalno izpostavljene zunanjim pogojem. Obstoječi standardi za homologacijo ne obravnavajo mehanskih obremenitev, do katerih lahko pride med prevozom fotonapetostnih sistemov na kraj vgradnje. Ta del standarda IEC 62759 opisuje metode za simulacijo prevoza celotnih pakiranih enot modulov in kombiniranih posledičnih okoljskih vplivov, vendar ne zajema meril za uspeh/neuspeh.
Ta standard je oblikovan tako, da se lahko preskusno zaporedje uskladi z zaporedji iz standarda IEC 61215 ali IEC 61646, zato se lahko za simulacijo prevoza in vrednotenje učinkovitosti projektiranja fotonapetostnih modulov uporabi ena sama skupina vzorcev. Ta standard se uporablja za ploščate fotonapetostne module, vendar se lahko uporablja tudi kot podlaga za preskušanje koncentratorskih fotonapetostnih (CPV) modulov in sestavov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2015
Preskušanje prevoza fotonapetostnih (PV) modulov - 1. del: Prevoz in dobava
skladov fotonapetostnih modulov
Transportation testing of photovoltaic (PV) modules - Part 1: Transportation and shipping
of PV module stacks
Ta slovenski standard je istoveten z: EN 62759-1:2015
ICS:
27.160 6RQþQDHQHUJLMD Solar energy engineering
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62759-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2015
ICS 27.160
English Version
Photovoltaic (PV) modules - Transportation testing -
Part 1: Transportation and shipping of module package units
(IEC 62759-1:2015)
Modules photovoltaïques (PV) - Essais de transport - Transportprüfung von Photovoltaik(PV)-Modulen -
Partie 1: Transport et expédition d'unités d'emballage Teil 1: Transport und Versand von PV-Modulpaketen
de modules (IEC 62759-1:2015)
(IEC 62759-1:2015)
This European Standard was approved by CENELEC on 2015-07-31. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62759-1:2015 E
European foreword
The text of document 82/962/FDIS, future edition 1 of IEC 62759-1, prepared by IEC/TC 82 "Solar
photovoltaic energy systems" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62759-1:2015.
The following dates are fixed:
(dop) 2016-05-01
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2018-07-31
• latest date by which the national standards conflicting with
the document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62759-1:2015 was approved by CENELEC as a European
Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-27 2008 Environmental testing - EN 60068-2-27 2009
Part 2-27: Tests - Test Ea and guidance:
Shock
IEC 60068-2-64 - Environmental testing - EN 60068-2-64 -
Part 2-64: Tests - Test Fh: Vibration,
broadband random and guidance
IEC 61215 2005 Crystalline silicon terrestrial photovoltaic EN 61215 2005
(PV) modules - Design qualification and
type approval
IEC 61646 2008 Thin-film terrestrial photovoltaic (PV) EN 61646 2008
modules - Design qualification and type
approval
IEC 61730-2 (mod) 2004 Photovoltaic (PV) module safety EN 61730-2 2007
qualification -
Part 2: Requirements for testing
IEC/TS 61836 - Solar photovoltaic energy systems - Terms, CLC/TS 61836 -
definitions and symbols
IEC 62108 2007 Concentrator Photovoltaic (CPV) modules EN 62108 2008
and assemblies - Design qualification and
type approval
1)
IEC/TS 62782 - Dynamic mechanical load testing for - -
photovoltaic (PV) modules
ISO 13355 - Packaging - Complete, filled transport EN ISO 13355 -
packages and unit loads - Vertical random
vibration test
1) To be published.
Publication Year Title EN/HD Year
ASTM D 880-92 2008 Standard Test Method for Impact Testing - -
for Shipping Containers and Systems
ASTM D 4169 2008 Standard Practice for Performance Testing - -
of Shipping Containers and Systems
ASTM D 4728 2006 Standard Test Method for Random - -
Vibration Testing of Shipping Containers
ASTM D 5277 1992 Standard Test Method for Performing - -
Programmed Horizontal Impacts Using an
Inclined Impact Tester
MIL-STD-810G - Test Method Standard: Environmental - -
Engineering Considerations and
Laboratory Tests
IEC 62759-1 ®
Edition 1.0 2015-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Photovoltaic (PV) modules – Transportation testing –
Part 1: Transportation and shipping of module package units
Modules photovoltaïques (PV) – Essais de transport –
Partie 1: Transport et expédition d'unités d'emballage de modules
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 27.160 ISBN 978-2-8322--2757-2
– 2 – IEC 62759-1:2015 IEC 2015
CONTENTS
FOREWORD. 3
1 Scope and object . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Sampling . 7
5 Handling . 7
6 Testing procedures . 8
6.1 General . 8
6.2 Measurements . 11
6.3 Transportation testing . 11
6.3.1 General . 11
6.3.2 Random vibration testing . 11
6.3.3 Shock testing . 12
6.4 Environmental stress tests . 13
6.4.1 PV modules . 13
6.4.2 CPV modules and receivers . 14
7 Reporting . 14
Annex A (normative) Test profiles . 16
A.1 Overview . 16
A.2 Data points of appropriate PSD test profiles . 16
Figure 1 – Test sequences for PV modules . 9
Figure 2 – Test sequences for CPV modules . 10
Figure A.1 – Appropriate PSD test profile . 18
Table A.1 – Severity of common transport test profiles: complete and in range (5 Hz –
200 Hz) . 16
Table A.2 – Main reference ASTM D4169 (truck medium) . 17
Table A.3 – Grid points ISO 13355 . 17
Table A.4 – IEC 60068-2-64 / MIL STD 810G . 17
Table A.5 – ISTA 3E . 17
IEC 62759-1:2015 IEC 2015 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
PHOTOVOLTAIC (PV) MODULES –
TRANSPORTATION TESTING –
Part 1: Transportation and shipping of module package units
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62759-1 has been prepared by IEC technical committee 82: Solar
photovoltaic energy systems.
The text of this standard is based on the following documents:
FDIS Report on voting
82/962/FDIS 82/982/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.