EN 62149-6:2003

Fibre optic active components and devices - Performance standards - Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers

Specifies the performance standards for 650 nm 250 Mbps transceivers for plastic optical fibre applications. It outlines the parameters which apply, with clearly defined conditions, severities, and pass/fail criteria. The tests outlined are intended to be performed as an initial design verification to prove any product's ability to satisfy the performance standard's requirements.

Aktvive Lichtwellenleiterbauelemente und -geräte - Betriebsverhaltensnorm - Teil 6: 650 nm, 250 Mbit/s Kunststofflichtwellenleiter-Sende- und Empfangsmodule

Composants et dispositifs actifs à fibres optiques - Normes de fonctionnement - Partie 6: Emetteurs-récepteurs de 650 nm 250 Mbit/s à fibres optiques de plastique

Spécifie les normes de fonctionnement applicables aux émetteurs-récepteurs de 650 nm 250 Mbit/s dans le cadre des applications des fibres optiques en plastique. Elle donne les définitions des paramètres qui s'appliquent, ainsi que les conditions, les sévérités et les critères d'acceptation/défaillance, qui sont clairement définis. Les essais sont prévus pour être réalisés à titre de vérification initiale de la conception, aux fins de démontrer l'aptitude du produit à satisfaire aux exigences des normes de fonctionnement.

Aktivne komponente in naprave optičnih vlaken – Izvedbeni standardi – 6. del 650-nm 250- Mbit/s oddajniki in sprejemniki iz plastičnih optičnih vlaken* (IEC 62149- 6:2003)*

General Information

• Status: Withdrawn
• Publication Date: 19-Nov-2003
• Withdrawal Date: 31-Oct-2006
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/SR 86C - Fibre optic systems and active devices
• Drafting Committee: IEC/SC 86C - IEC_SC_86C
• Parallel Committee: IEC/SC 86C - IEC_SC_86C
• Ref Project: SIST EN 62149-6:2004 - Fibre optic active components and devices - Performance standards -- Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers

Standards Content (Sample)

SLOVENSKI SIST EN 62149-6:2004

STANDARD
september 2004
Aktivne komponente in naprave optičnih vlaken – Izvedbeni standardi – 6. del
650-nm 250- Mbit/s oddajniki in sprejemniki iz plastičnih optičnih vlaken* (IEC
62149- 6:2003)*
Fibre optic active components and devices - Performance standards - Part 6: 650
nm 250 Mbit/s plastic optical fibre transceivers (IEC 62149- 6:2003)
ICS 33.180.20 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 62149-6
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2003

ICS 33.180.20
English version
Fibre optic active components and devices –
Performance standards
Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers
(IEC 62149-6:2003)
Composants et dispositifs actifs  Aktvive Lichtwellenleiterbauelemente
à fibres optiques – und -geräte –
Normes de fonctionnement Betriebsverhaltensnorm
Partie 6: Emetteurs-récepteurs de Teil 6: 650 nm, 250 Mbit/s Kunststoff-
650 nm 250 Mbit/s à fibres optiques lichtwellenleiter-Sende- und
en plastique Empfangsmodule
(CEI 62149-6:2003) (IEC 62149-6:2003)

This European Standard was approved by CENELEC on 2003-11-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 62149-6:2003 E
Foreword
The text of document 86C/544/FDIS, future edition 1 of IEC 62149-6, prepared by SC 86C, Fibre optic
systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as EN 62149-6 on 2003-11-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-11-01

Annexes designated "normative" are part of the body of the standard.
In this standard, annexes A and ZA are normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62149-6:2003 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60191 NOTE Harmonized in EN 60191 series (not modified).
IEC 61280 NOTE Harmonized in EN 61280 series (not modified).
IEC 61281-1-1 NOTE Harmonized as EN 61281-1-1:1999 (not modified).
IEC 62007-1 NOTE Harmonized as EN 62007-1:2000 (not modified).
IEC 62007-2 NOTE Harmonized as EN 62007-2:2000 (not modified).
__________
- 3 - EN 62149-6:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60068-2-20 - Basic environmental testing procedures HD 323.2.20 S3 1988
Part 2: Tests - Test T: Soldering

IEC 60793-2 Series Optical fibres EN 60793-2 Series
Part 2: Product specifications -

IEC 60950 (mod) Series Information technology equipment - EN 60950 Series
Safety
1)
MIL-STD-883 - Microcircuits - -

1)
ANSI/UL-94 - Test for Flammability of Plastic - -
Materials for Parts in Devices and
Appliances
1)
Undated reference.
2)
Valid edition at date of issue.

NORME
CEI
INTERNATIONALE IEC
62149-6
INTERNATIONAL
Première édition
STANDARD
First edition
2003-09
Composants et dispositifs actifs
à fibres optiques –
Normes de fonctionnement –
Partie 6:
Emetteurs-récepteurs de 650 nm 250 Mbit/s
à fibres optiques en plastique
Fibre optic active components and devices –
Performance standards –
Part 6:
650-nm 250-Mbit/s plastic optical fibre
transceivers
© IEC 2003 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail]  Web: www.iec.ch
CODE PRIX
M
Commission Electrotechnique Internationale PRICE CODE
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
Pour prix, voir catalogue en vigueur
For price, see current catalogue

62149-6 © IEC:2003 – 3 –
CONTENTS
FOREWORD . 5
INTRODUCTION .9
1 Scope .11
2 Normative references.11
3 Symbols.11
4 Product parameters .13
4.1 Absolute limiting ratings.13
4.2 Operating environment .15
4.3 Functional specification .15
4.4 Diagrams .17
4.4.1 Schematic diagram: Receiver section .17
4.4.2 Schematic diagram: Transmitter section.17
5 Testing .17
5.1 Characterization testing.17
5.1.1 Characterization: Transmitter section.19
5.1.2 Characterization: Receiver section.19
5.2 Performance testing.19
5.2.1 Sample size, sequencing and groupings .21
5.2.2 Performance testing.21
6 Safety.21
Annex A (normative) Test requirements .23
Bibliography.25
Figure 1 – Receiver section schematic diagram.17
Figure 2 – Transmitter section schematic diagram.17
Table 1 – Absolute limiting ratings.13
Table 2 – Operating environment .15
Table 3 – Functional specification .15
Table 4 – Transmitter section characterization tests.19
Table 5 – Receiver section characterization tests.19
Table 6 – Performance test plan.21
Table A.1 – Sample size, sequencing and grouping requirements .23

62149-6 © IEC:2003 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PERFORMANCE STANDARDS –
Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to
technical committees; any IEC National Committee interested in the subject dealt with may participate in this
preparatory work. International, governmental and non-governmental organizations liaising with the IEC also
participate in this preparation. IEC collaborates closely with the International Organization for Standardization
(ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62149-6 has been prepared by subcommittee 86C: Fibre optic
systems and active devices, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
FDIS Report on voting
86C/544/FDIS 86C/564/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

62149-6 © IEC:2003 – 7 –
This standard constitutes Part 6 of the IEC 62149 series, published under the general title
Fibre optic active components and devices – Performance standards. This series consists of
Part 1, devoted to general requirements, and various additional parts, specific to individual
module families.
Part 1: General and guidance
Pa
...