EN 60512-23-7:2005

Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors

Defines a test method intended to assess the screening effectiveness of screened non-circular multi-pole, electrically short, connectors by the measurement of the effective (surface) transfer impedance, using a network analyzer, for frequencies up to 1 GHz. Is based on the line injection test method.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 23-7: Prüfungen der Schirmung und Dämpfung - Prüfung 23g: Effektive Transferimpedanz von Steckverbindern

Connecteurs pour équipements électroniques - Essais et mesures - Partie 23-7: Essais d'écrantage et de filtrage - Essai 23g: Impédance de transfert efficace des connecteurs

Définit une méthode d'essai destinée à évaluer l'efficacité de l'écrantage des connecteurs écrantés non circulaires multi-pôles, électriquement courts par la mesure de l'impédance de transfert (de surface) efficace, au moyen d'un analyseur de réseaux, pour des fréquences jusqu'à 1 GHz. Est fondée sur la méthode d'essai par injection de ligne.

Konektorji za elektronsko opremo – Preskusi in meritve – 23-7. del: Presejalni in filtrirni preskusi – Preskus 23g: Efektivna prehodna impedanca konektorjev (IEC 60512-23-7:2005)

General Information

• Status: Published
• Publication Date: 21-Mar-2005
• Withdrawal Date: 29-Feb-2008
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Parallel Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 22-Mar-2005
• Completion Date: 22-Mar-2005
• Ref Project: SIST EN 60512-23-7:2005 - Connectors for electronic equipment - Tests and measurements -- Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors

Standards Content (Sample)

SLOVENSKI SIST EN 60512-23-7:2005

STANDARD
december 2005
Konektorji za elektronsko opremo – Preskusi in meritve – 23-7. del: Presejalni
in filtrirni preskusi – Preskus 23g: Efektivna prehodna impedanca konektorjev
(IEC 60512-23-7:2005)
Connectors for electronic equipment – Tests and measurements – Part 23-7:
Screening and filtering tests – Test 23g: Effective transfer impedance of connectors
(IEC 60512-23-7:2005)
ICS 31.220.10 Referenčna številka
SIST EN 60512-23-7:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60512-23-7
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2005

ICS 31.220.10


English version


Connectors for electronic equipment –
Tests and measurements
Part 23-7: Screening and filtering tests –
Test 23g: Effective transfer impedance of connectors
(IEC 60512-23-7:2005)


Connecteurs pour équipements Steckverbinder für elektronische
électroniques – Einrichtungen –
Essais et mesures Mess- und Prüfverfahren
Partie 23-7: Essais d'écrantage Teil 23-7: Prüfungen der Schirmung und
et de filtrage – Dämpfung –
Essai 23g: Impédance de transfert Prüfung 23g: Effektive Transferimpedanz
efficace des connecteurs von Steckverbindern
(CEI 60512-23-7:2005) (IEC 60512-23-7:2005)


This European Standard was approved by CENELEC on 2005-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60512-23-7:2005 E

---------------------- Page: 2 ----------------------

EN 60512-23-7:2005 - 2 -
Foreword
The text of document 48B/1505/FDIS, future edition 1 of IEC 60512-23-7, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60512-23-7 on 2005-03-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-03-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60512-23-7:2005 approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60512-23-7:2005
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60050-581 - International Electrotechnical Vocabulary - -
(IEV)
Chapter 581: Electromechanical
components for electronic equipment

2)
IEC 60068-1 1988 Environmental testing EN 60068-1 1994
Part 1: General and guidance

1)
3)
IEC 60512-1-100 - Connectors for electronic equipment - EN 60512-1-100 2001
Tests and measurements
Part 1-100: General - Applicable
publications

1) 3)
IEC 60512-23-3 - Electromechanical components for EN 60512-23-3 2001
electronic equipment – Basic testing
procedures and measuring methods
Part 23-3: Test
...