EN IEC 63203-402-1:2022

Wearable electronic devices and technologies - Part 402-1: Performance measurement of fitness wearables - Test methods of glove-type motion sensors for measuring finger movements

IEC 63203-402-1:2022 specifies test methods for wearable glove-type motion sensors to measure finger movements. The measurement methods include goniometric parameters related to the finger postures and flexion dynamics. Glove-type motion sensors are the type of gloves considered within the scope of this document for testing and measurement. This document describes direct and indirect measurement methods. In the direct measurement method, the angles of the joints of each finger are directly measured by a goniometer. The indirect method uses a measurement device such as a servomotor-based angle-measuring device. This document is applicable to angle measurement of all gloves with glove-type motion sensors without limitation of the device technology or size.

Tragbare elektronische Geräte und Technologien - Teil 402-1: Performance Messung von Fitness Wearables - Prüfverfahren für handschuhartige Bewegungssensoren zur Messung von Fingerbewegungen

Technologies et dispositifs électroniques prêts-à-porter - Partie 402-1: Mesure des performances des dispositifs prêts-à-porter d’activité physique - Méthodes d’essai des capteurs de mouvement type gant pour le mesurage des mouvements digitaux

L'IEC 63203-402-1:2022 spécifie les méthodes d'essai des capteurs de mouvement type gant prêts-à-porter pour le mesurage des mouvements digitaux. Les méthodes de mesure comprennent les paramètres goniométriques relatifs à la position et à la dynamique de flexion des doigts. Les capteurs de mouvement type gant sont les types de gants couverts par le présent document pour les essais et mesurages. Le présent document décrit les méthodes de mesure directe et indirecte. Dans la méthode de mesure directe, les angles des articulations de chaque doigt sont mesurés directement par un goniomètre. La méthode de mesure indirecte utilise un dispositif de mesure tel qu’un dispositif de mesure d’angle à servomoteur. Le présent document est applicable au mesurage d’angle de tous les gants ayant des capteurs de mouvement type gant sans limitation de technologie ou de taille du dispositif.

Nosljive elektronske naprave in tehnologije - 402-1. del: Merjenje zmogljivosti nosljivih izdelkov za fitnes - Preskusne metode senzorjev gibanja v rokavicah za merjenje premikov prstov (IEC 63203-402-1:2022)

Standard IEC 63203-402-1:2022 določa preskusne metode za nosljive senzorje gibanja v rokavicah za merjenje premikov prstov. Merilne metode vključujejo goniometrične parametre, povezane s položaji prstov in dinamiko upogiba. Senzorji gibanja v rokavicah so vrsta rokavic, ki spadajo na področje uporabe tega dokumenta za preskušanje in merjenje. Ta dokument opisuje neposredne in posredne merilne metode. Pri neposredni merilni metodi se koti členkov posameznega prsta izmerijo neposredno z goniometrom. Posredna metoda uporablja merilno napravo (npr. naprava za merjenje kotov na osnovi servomotorja). Ta dokument se uporablja za merjenje kotov vseh rokavic z vgrajenimi s senzorji gibanja, brez omejitev glede tehnologije ali velikosti naprave.

General Information

• Status: Published
• Publication Date: 15-Dec-2022
• ICS: 31.020 - Electronic components in general
• Technical Committee: CLC/SR 124 - Wearable Electronic Devices and Technologies
• Drafting Committee: IEC/TC 124 - Wearable electronic devices and technologies
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 16-Dec-2022
• Completion Date: 16-Dec-2022
• Ref Project: SIST EN IEC 63203-402-1:2023 - Wearable electronic devices and technologies - Part 402-1: Performance measurement of fitness wearables - Test methods of glove-type motion sensors for measuring finger movements (IEC 63203-402-1:2022)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 63203-402-1:2023
01-februar-2023
Nosljive elektronske naprave in tehnologije - 402-1. del: Merjenje zmogljivosti
nosljivih izdelkov za fitnes - Preskusne metode senzorjev gibanja v rokavicah za
merjenje premikov prstov (IEC 63203-402-1:2022)
Wearable electronic devices and technologies - Part 402-1: Performance measurement
of fitness wearables - Test methods of glove-type motion sensors for measuring finger
movements (IEC 63203-402-1:2022)
Tragbare elektronische Geräte und Technologien - Teil 402-1: Performance Messung
von Fitness Wearables - Prüfverfahren für handschuhartige Bewegungssensoren zur
Messung von Fingerbewegungen (IEC 63203-402-1:2022)
Technologies et dispositifs électroniques prêts-à-porter - Partie 402-1: Mesure des
performances des dispositifs prêts-à-porter d’activité physique - Méthodes d’essai des
capteurs de mouvement type gant pour le mesurage des mouvements digitaux (IEC
63203-402-1:2022)
Ta slovenski standard je istoveten z: EN IEC 63203-402-1:2022
ICS:
31.080.99 Drugi polprevodniški elementi Other semiconductor devices
59.080.80 Inteligentne tekstilije Smart textiles
97.220.01 Športna oprema in Sports equipment and
pripomočki na splošno facilities in general
SIST EN IEC 63203-402-1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 63203-402-1:2023

---------------------- Page: 2 ----------------------
SIST EN IEC 63203-402-1:2023


EUROPEAN STANDARD EN IEC 63203-402-1

NORME EUROPÉENNE

EUROPÄISCHE NORM December 2022
ICS 31.020

English Version
Wearable electronic devices and technologies - Part 402-1:
Performance measurement of fitness wearables - Test methods
of glove-type motion sensors for measuring finger movements
(IEC 63203-402-1:2022)
Technologies et dispositifs électroniques prêts-à-porter - Tragbare elektronische Geräte und Technologien - Teil 402-
Partie 402-1: Mesure des performances des dispositifs 1: Performance Messung von Fitness Wearables -
prêts-à-porter d'activité physique - Méthodes d'essai des Prüfverfahren für handschuhartige Bewegungssensoren zur
capteurs de mouvement type gant pour le mesurage des Messung von Fingerbewegungen
mouvements digitaux (IEC 63203-402-1:2022)
(IEC 63203-402-1:2022)
This European Standard was approved by CENELEC on 2022-12-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 63203-402-1:2022 E

---------------------- Page: 3 ----------------------
SIST EN IEC 63203-402-1:2023
EN IEC 63203-402-1:2022 (E)
European foreword
The text of document 124/195/FDIS, future edition 1 of IEC 63203-402-1, prepared by IEC/TC 124
"Wearable electronic devices and technologies" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 63203-402-1:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-09-09
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-12-09
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC we
...