EN 60061-3:1993/A44:2011
(Amendment)Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
Subscribe to IEC 60061 Database to access the full and updated content of the series.
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit - Teil 3: Lehren
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité - Partie 3: Calibres
Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne zamenljivosti in varnosti - 3. del: Kalibri
Vsebuje priporočila IEC v zvezi z vznožki in okovi žarnic in sijalk, ki so danes v splošni rabi, skupaj z ustreznimi kalibri, s ciljem zagotoviti mednarodno medsebojno zamenljivost. Ponazorjeni kalibri, čeprav načeloma splošno sprejeti, niso nujno edina oblika, v kateri so lahko narejeni.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60061-3:2000/A44:2012
01-marec-2012
Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne
zamenljivosti in varnosti - 3. del: Kalibri
Lamp caps and holders together with gauges for the control of interchangeability and
safety - Part 3: Gauges
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und
Sicherheit - Teil 3: Lehren
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et
de la sécurité - Partie 3:
Ta slovenski standard je istoveten z: EN 60061-3:1993/A44:2011
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
SIST EN 60061-3:2000/A44:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60061-3:2000/A44:2012
---------------------- Page: 2 ----------------------
SIST EN 60061-3:2000/A44:2012
EUROPEAN STANDARD
EN 60061-3/A44
NORME EUROPÉENNE
November 2011
EUROPÄISCHE NORM
ICS 29.140.10
English version
Lamp caps and holders together with gauges for the control of
interchangeability and safety -
Part 3: Gauges
(IEC 60061-3:1969/A44:2011)
Culots de lampes et douilles ainsi que Lampensockel und -fassungen sowie
calibres pour le contrôle de Lehren zur Kontrolle der Austauschbarkeit
l'interchangeabilité et de la sécurité - und Sicherheit -
Partie 3: Calibres Teil 3: Lehren
(CEI 60061-3:1969/A44:2011) (IEC 60061-3:1969/A44:2011)
This amendment A44 modifies the European Standard EN 60061-3:1993; it was approved by CENELEC on
2011-10-29. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60061-3:1993/A44:2011 E
---------------------- Page: 3 ----------------------
SIST EN 60061-3:2000/A44:2012
EN 60061-3:1993/A44:2011 - 2 -
Foreword
The text of document 34B/1601/FDIS, future edition 1 of IEC 60061-3:1969/A44, prepared by SC 34B,
"Lamp caps and holders", of IEC/TC 34, "Lamps and related equipment" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 60061-3:1993/A44:2011.
The following dates are fixed:
(dop) 2012-07-29
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2014-10-29
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 60061-3:1969/A44:2011 was approved by CENELEC as a
European Standard without any modification.
---------------------- Page: 4 ----------------------
SIST EN 60061-3:2000/A44:2012
60061-3 Amend. 44 CEI/IEC:2011 – 1 –
SOMMAIRE CONTENTS
CALIBRES – SOMMAIRE PAR DÉSIGNATION GAUGES – CONTENTS BY DESIGNATION
Feuilles Sheet
Calibre «Entre» pour culots sur lampes "Go" gauge for caps on finished
terminées BA20 . 7006-2-3 lamps BA20 . 7006-2-3
Calibre d'acceptation pour culots B22d destinés à Acceptance gauge for B22d caps intended for
un enfilage automatique . 7006-3-1 automatic wire threading . 7006-3-1
Calibres «Entre» pour culots à deux broches G1.27, "Go" g
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.