IEC 63013:2017/AMD1:2021
(Amendment)Amendment 1 - LED packages - Long-term luminous and radiant flux maintenance projection
Amendment 1 - LED packages - Long-term luminous and radiant flux maintenance projection
Amendement 1 - LED encapsulées - Projection à long terme concernant la conservation du flux lumineux et du flux énergétique
General Information
Relations
Standards Content (Sample)
IEC 63013 ®
Edition 1.0 2021-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 1
AM ENDEMENT 1
LED packages – Long-term luminous and radiant flux maintenance projection
LED encapsulées – Projection à long terme concernant la conservation du flux
lumineux et du flux énergétique
IEC 63013:2017-06/AMD1:2021-10(en-fr)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - IEC online collection - oc.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur adapté à vos besoins.
les projets et les publications remplacées ou retirées.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au
Restez informé sur les nouvelles publications IEC. Just
monde, avec plus de 22 000 articles terminologiques en
Published détaille les nouvelles publications parues.
anglais et en français, ainsi que les termes équivalents dans
Disponible en ligne et une fois par mois par email.
16 langues additionnelles. Egalement appelé Vocabulaire
Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 63013 ®
Edition 1.0 2021-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 1
AM ENDEMENT 1
LED packages – Long-term luminous and radiant flux maintenance projection
LED encapsulées – Projection à long terme concernant la conservation du flux
lumineux et du flux énergétique
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-1037-6
– 2 – IEC 63013:2017/AMD1:2021
© IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LED PACKAGES – LONG-TERM LUMINOUS AND
RADIANT FLUX MAINTENANCE PROJECTION
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to IEC 63013:2017 has been prepared by subcommittee 34A: Electric light
sources, of IEC technical committee 34: Lighting.
The text of this Amendment is based on the following documents:
Draft Report on voting
34A/2233(F)/CDV 34A/2253/RVC
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this Amendment is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
© IEC 2021
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications/.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
___________
1 Scope
Replace the existing paragraphs with the following new paragraphs:
This document is applicable to LED packages for general lighting services and LED packages
for horticultural lighting.
It specifies procedures and conditions for measuring the luminous flux maintenance of LED
packages. It also provides the procedures and conditions (criteria) of projecting the long-term
luminous flux maintenance based on limited luminous flux maintenance test data collected.
Within the context of this document, wherever luminous flux measurement data is specified,
radiant flux measurement data and photon flux measurement data can also be used.
These projection methods employ data collected as per ANSI/IES LM-80-20 (LM-80).
The long-term projection is based on the exponential-fit-function procedure of
ANSI/IES TM-21-19 (TM-21) and gives an alternative border function procedure in the case
where the exponential-fit-function of ANSI/IES TM-21-19 is not applicable.
2 Normative references
Replace the existing second, third and fourth references with the following two new references:
ANSI/IES TM-21-19 , Technical Memorandum: Projecting Long Term Lumen, Photon, and
Radiant Flux Maintenance of LED Light Sources
ANSI/IES LM-80-20, Approved Method: Measuring Luminous Flux and Color Maintenance of
LED Packages, Arrays, and Modules
___________
A revision of ANSI/IES TM-21-19, and a new ANSI approved IES calculation tool are under preparation by the
Illuminating Engineering Society. Publication of ANSI/IES TM-21-21 and the ANSI/IES TM-21-21 Calculator are
expected prior to 2021-12-31.
– 4 – IEC 63013:2017/AMD1:2021
© IEC 2021
4 Test method, data collection and sample size
Replace the existing first paragraph with the following new paragraph:
Luminous flux maintenance data shall be collected according to the methods described in
ANSI/IES LM-80-20.
Replace the existing third paragraph with the following new paragraph:
Recommendations on sample size are found in ANSI/IES TM-21-19.
5.2.1 Method
Replace the existing first and second paragraphs with the following new paragraphs:
The exponential fit function method (EFF), as described in ANSI/IES TM-21-19, is based on the
assumption that after early luminous flux degradation modes are complete, the subsequent test
data can be fitted and extrapolated using an exponential curve-fit function, using the formula
f (t) = B exp(−αt) (1)
The luminous flux maintenance projection shall be performed according to ANSI/IES TM-21-19,
Section 5.
6 Temperature data interpolation
Replace the existing first paragraph with the following new paragraph:
If temperature interpolation is employed, then it shall be performed according to the Arrhenius
formula in ANSI/IES TM-21-19, Section 6.
7 Adjustment of results
Replace the existing paragraph with the following new paragraph:
The results of 5.2 and 5.3 shall be adjusted according to ANSI/IES TM-21-19, 5.2.5.
8 Reporting
Replace the existing paragraph with the following new paragraph:
The report of the luminous flux maintenance projection shall include the following information
shown in Table 1. Only L and L values adjusted as per Clause 7 shall be reported, according
70 xx
to the notation in ANSI/IES TM-21-19, 5.2.6.
© IEC 2021
Table 1 – Information to be included in the report
Replace, in the existing Table 1, the seventh row (not counting the column headers) with the
following new row:
Test duration used for projection as per ANSI/IES TM-21-19 h to h
Annex B
Figure B.1 – Process flow chart
Replace the existing figure with the following new Figure B.1:
Figure B.1 – Process flow chart
___________
– 6 – IEC 63013:2017/AMD1:2021
© IEC 2021
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
LED ENCAPSULÉES – PROJECTION À LONG TERME CONCERNANT
LA CONSERVATION DU FLUX LUMINEUX ET DU FLUX ÉNERGÉTIQUE
AMENDEMENT 1
AVANT-PROPOS
1) La Commission Electrotechnique Internationale (IEC) est une organisation mondiale de normalisation composée
de l'ensemble des c
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.