Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance

IEC 61753-1:2018 is also available as IEC 61753-1:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61753-1:2018 provides guidance for the drafting of performance standards for all passive fibre optic products. This document defines the tests and severities which form the performance categories or general operating service environments and identifies those tests which are considered to be product specific. Test and severity details are given in Annex A. This second edition cancels and replaces the first edition published in 2007. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) definitions updated with new products: wall outlets, wall or pole mounted boxes, splices, ODF modules, street cabinets, hardened connectors and field mountable connectors;
b) categories U and O are replaced by categories OP and OP+. No mandatory sequence in category OP+. Category OP+ contains the tests from category OP with the addition of only 4 other tests;
c) addition of Category I (Industrial);
d) temperature ranges added (with the HD suffix to the categories C, OP, OP+ and I) in case passive optical components are placed in a housing together with active electronics (HD stands for “heat dissipation”);
e) the height of category A changed from 3 m to ground level (0 m);
f) the lower level height of category G environment changed from ground level (0 m) to –1 m below ground level. Upper level remains at 3 m above ground level;
g) addition of performance tests, test severities and performance criteria for new products: Wall outlet, wall or pole mounted boxes, mechanical splices, fusion splice protectors, ODF modules, street cabinets, field mountable connectors and hardened optical connectors;
h) test severity of "Mating durability" test for connectors in categories C, OP ,OP+ and I is reduced to 200 cycles for connectors with cylindrical ferrules and 50 cycles for connectors with rectangular ferrules;
i) test severity of "Change of temperature" test for connectors and passive optical components in category I is reduced from 20 cycles to 12 cycles (harmonized with connectors and components from other categories);
j) test severity of "Flexing of strain relief" test for connectors in categories C, OP and OP+ is reduced to 50 cycles;
k) test severities of "Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures" test for all enclosures is reduced to 5 cycles;
l) test severities of "Change of temperature" test for all protective housings in categories C, A, G and S is reduced from 20 cycles to 12 cycles (harmonized with connectors and components);
m) test severities of "Resistance to solvents and contaminating fluids" test for closures in categories G and S changed – kerosene is removed, diesel oil exposure reduced to 1 h immersion and 24 h drying at room temperature;
n) sealing performance criteria of sealed closures for categories G and A are reduced to 20 kPa overpressure.
o) the change in attenuation criterion for connectors has changed from peak-to-peak into a +/- deviation from the original value of the transmitted power at the start of the test (harmonized with the change in attenuation criterion for components, splices and protective housings).
Keywords: performance standards for all passive fibre optic products
The contents of the corrigendum of May 2019 have been included in this copy.

Dispositifs d'interconnexion et composants passifs fibroniques - Norme de performance - Partie 1 : Généralités et recommandations

IEC 61753-1:2018 est disponible sous forme de IEC 61753-1:2018 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L'IEC 61753-1:2018 fournit des recommandations pour la rédaction de normes de qualité de fonctionnement applicables à tous les produits passifs fibroniques. Le présent document définit les essais et les sévérités qui constituent les catégories de qualité de fonctionnement ou les environnements de service ou de fonctionnement général et elle identifie les essais qui sont considérés comme spécifiques à un produit. Les informations détaillées concernant les essais et les sévérités sont données à l’Annexe A. Cette deuxième édition annule et remplace la première édition parue en 2007. Elle constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:
a) définitions mises à jour avec de nouveaux produits: prises murales, coffrets à montage mural ou sur poteau, épissures, modules ODF, armoires d’environnement urbain, connecteurs renforcés et connexions montables sur le terrain;
b) les catégories U et O ont été remplacées par les catégories OP et OP+. Pas de séquence obligatoire dans la catégorie OP+. La catégorie OP+ contient les essais de la catégorie OP avec l’ajout de seulement 4 autres essais;
c) ajout de la catégorie I (industriel);
d) ajout des plages de température (avec le suffixe HD aux catégories C, OP, OP+ et I) au cas où des composants optiques passifs sont placés dans un boîtier avec des composants électroniques actifs (HD signifie Heat Dissipation, dissipation thermique);
e) la hauteur de la catégorie A a été modifiée de 3 m au niveau du sol (0 m);
f) la hauteur du niveau inférieur de l’environnement de catégorie G a été modifiée du niveau du sol (0 m) à –1 m en dessous du niveau du sol. Le niveau supérieur reste à 3 m au-dessus du niveau du sol;
g) ajout d’essais de performance, de sévérités d’essai et de critères de qualité de fonctionnement pour de nouveaux produits: prises murales, coffrets à montage mural ou sur poteau, épissures mécaniques, protecteurs d’épissures par fusion, modules ODF, armoires d’environnement urbain, connexions montables sur le terrain et connecteurs optiques renforcés;
h) la sévérité de l’essai «Durabilité de l’accouplement» pour les connecteurs des catégories C, OP, OP+ et I a été ramenée à 200 cycles pour les connecteurs avec férules cylindriques et à 50 cycles pour les connecteurs avec férules rectangulaires;
i) la sévérité de l’essai «Variations de température» pour les connecteurs et les composants optiques passifs de la catégorie I a été ramenée de 20 cycles à 12 cycles (harmonisée avec les connecteurs et les composants d’autres catégories);
j) la sévérité de l’essai «Flexion du serre-câble» pour les connecteurs des catégories C, OP et OP+ a été ramenée à 50 cycles;
k) les sévérités de l’essai «Montage et démontage des épissures mécaniques fibroniques, des systèmes de gestion des fibres et des boîtiers» pour tous les boîtiers ont été ramenées à 5 cycles;
l) les sévérités de l’essai «Variations de température» pour tous les boîtiers de protection des catégories C, A, G et S ont été ramenées de 20 cycles à 12 cycles (harmonisées avec les connecteurs et les composants);
m) les sévérités de l’essai «Résistance aux solvants et aux fluides contaminants» pour les boîtiers des catégories G et S ont été modifiées: le kérosène a été supprimé, l’exposition au gasoil a été ramenée à 1 h d’immersion et à 24 h de séchage à température ambiante;
n) les critères de performance d’étanchéité des boîtiers étanches pour les catégories G et A ont été ramenés à une surpression de 20 kPa;
o) le critère de variations de l’affaiblissement pour les connecteurs a été modifié de crête-à-crête à une divergence +/- par rapport à la valeur d’origine de la puissance transmise au début de l’essai (harmonisée avec les critèr

General Information

Status
Published
Publication Date
14-Aug-2018
Current Stage
PPUB - Publication issued
Start Date
10-Aug-2018
Completion Date
15-Aug-2018
Ref Project

Relations

Buy Standard

Standard
IEC 61753-1:2018+AMD1:2020 CSV - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance Released:6/24/2020
English language
118 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
IEC 61753-1:2018 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance
English and French language
123 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
IEC 61753-1:2018+AMD1:2020 CSV - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance Released:6/24/2020
English and French language
242 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC 61753-1
®


Edition 2.1 2020-06
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD

colour
inside

Fibre optic interconnecting devices and passive components – Performance
standard –
Part 1: General and guidance

IEC 61753-1:2018-08+AMD1:2020-06 CSV(en)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2020 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and definitions clause of
IEC publications issued between 2002 and 2015. Some
IEC Customer Service Centre - webstore.iec.ch/csc entries have been collected from earlier publications of IEC
If you wish to give us your feedback on this publication or TC 37, 77, 86 and CISPR.

need further assistance, please contact the Customer Service

Centre: sales@iec.ch.

---------------------- Page: 2 ----------------------
IEC 61753-1

®


Edition 2.1 2020-06

CONSOLIDATED VERSION



INTERNATIONAL



STANDARD








colour

inside









Fibre optic interconnecting devices and passive components – Performance

standard –

Part 1: General and guidance

























INTERNATIONAL

ELECTROTECHNICAL

COMMISSION



ICS 33.180.20 ISBN 978-2-8322-8581-7




  Warning! Make sure that you obtained this publication from an authorized distributor.

® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 3 ----------------------
IEC 61753-1
®


Edition 2.1 2020-06

REDLINE VERSION

colour
inside


Fibre optic interconnecting devices and passive components – Performance
standard –
Part 1: General and guidance

IEC 61753-1:2018-08+AMD1:2020-06 CSV(en)

---------------------- Page: 4 ----------------------
– 2 – IEC 61753-1:2018+AMD1:2020 CSV
 © IEC 2020
CONTENTS
FOREWORD . 4
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 10
4 Abbreviations . 14
5 Preparation of a performance standard . 14
5.1 Performance standard title . 14
5.2 Tests .
...

IEC 61753-1
®

Edition 2.0 2018-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside


Fibre optic interconnecting devices and passive components – Performance
standard –
Part 1: General and guidance

Dispositifs d'interconnexion et composants passifs fibroniques – Norme de
performance –
Partie 1: Généralités et recommandations

IEC 61753-1:2018-08(en-fr)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2018 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 21 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - webstore.iec.ch/advsearchform IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 67 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: sales@iec.ch.


A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 21 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 16
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.


Recherche de publications IEC -
Glossaire IEC - std.iec.ch/glossary
webstore.iec.ch/advsearchform
67 000 entrées terminologiques électrotechniques, en anglais
La recherch
...

IEC 61753-1
®


Edition 2.1 2020-06
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside

Fibre optic interconnecting devices and passive components – Performance
standard –
Part 1: General and guidance

Dispositifs d’interconnexion et composants passifs à fibres optiques – Norme
de performance –
Partie 1 : Généralités et recommandations

IEC 61753-1:2018-08+AMD1:2020-06 CSV(en-fr)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2020 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and definitions clause of
IEC publications issued between 2002 and 2015. Some
IEC Customer Service Centre - webstore.iec.ch/csc entries have been collected from earlier publications of IEC
If you wish to give us your feedback on this publication or TC 37, 77, 86 and CISPR.

need further assistance, please contact the Customer Service

Centre: sales@iec.ch.


A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Electropedia - www.electropedia.org
webstore.iec.ch/advsearchform Le premier dictionnaire d'électrotechnologie en ligne au
La recherche avancée permet de trouver des publications IEC monde, avec plus de 22 000 articles terminologiques en
en utilisant différents critères (numéro de référence, texte, anglais et en français, ainsi que les termes équivalents dans
comité d’études,…). Elle donne aussi des informations sur les 16 langues additionnelles. Egalement appelé Vocabulaire
projets et les publications remplacées ou retirées. Electrotechnique International (IEV) en ligne.

IEC Just Published - webstore.iec.ch/justpublished Glossaire IEC - std.iec.ch/glossary
Restez informé sur les nouvelles publications IEC. Just 67 000 entrées terminologiques électrotechniques, en anglais
Published détaille les nouvelles publications parues. et en français, extraites des articles Termes et définitions des
Disponible en ligne et une fois par mois par email. publications IEC
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.