iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 61753-1:2018/AMD1:2020

(Main)

Amendment 1 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance

Amendment 1 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance

Amendement 1 - Dispositifs d'interconnexion et composants passifs fibroniques - Norme de performance - Partie 1 : Généralités et recommandations

General Information

Status
Published
Publication Date
23-Jun-2020
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
33.180.20 - Fibre optic interconnecting devices
Technical Committee
SC 86B - Fibre optic interconnecting devices and passive components
Current Stage
PPUB - Publication issued
Completion Date
24-Jun-2020
Ref Project

Buy Standard

IEC 61753-1:2018/AMD1:2020 - Amendment 1 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidanceIEC 61753-1:2018/AMD1:2020 - Amendment 1 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance
PreviousNext
Standard
IEC 61753-1:2018/AMD1:2020 - Amendment 1 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview
IEC 61753-1:2018/AMD1:2020 - Amendment 1 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidanceIEC 61753-1:2018/AMD1:2020 - Amendment 1 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance
PreviousNext
Standard
IEC 61753-1:2018/AMD1:2020 - Amendment 1 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance
English and French language
6 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC 61753-1
Edition 2.0 2020-06
INTERNATIONAL
STANDARD
AMENDMENT 1
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 1: General and guidance
IEC 61753-1:2018-08/AMD1:2020-06(en)
---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2020 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from

either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC

copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or

your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC

The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes

International Standards for all electrical, electronic and related technologies.
About IEC publications

The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the

latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org

The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,

variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English

committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.

and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary

details all new publications released. Available online and once 67 000 electrotechnical terminology entries in English and

a month by email. French extracted from the Terms and definitions clause of IEC
publications issued between 2002 and 2015. Some entries

IEC Customer Service Centre - webstore.iec.ch/csc have been collected from earlier publications of IEC TC 37, 77,

If you wish to give us your feedback on this publication or need 86 and CISPR.
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
---------------------- Page: 2 ----------------------
IEC 61753-1
Edition 2.0 2020-06
INTERNATIONAL
STANDARD
AMENDMENT 1
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 1: General and guidance
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.180.20 ISBN 978-2-8322-8527-5
Warning! Make sure that you obtained this public
...

IEC 61753-1
Edition 2.0 2020-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 1: General and guidance
Dispositifs d’interconnexion et composants passifs à fibres optiques – Norme
de performance –
Partie 1 : Généralités et recommandations
IEC 61753-1:2018-08/AMD1:2020-06(en-fr)
---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2020 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from

either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC

copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or

your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni

utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et

les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des

questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez

les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC

The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes

International Standards for all electrical, electronic and related technologies.
About IEC publications

The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the

latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org

The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,

variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English

committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.

and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary

details all new publications released. Available online and once 67 000 electrotechnical terminology entries in English and

a month by email. French extracted from the Terms and definitions clause of IEC
publications issued between 2002 and 2015. Some entries

IEC Customer Service Centre - webstore.iec.ch/csc have been collected from earlier publications of IEC TC 37, 77,

If you wish to give us your feedback on this publication or need 86 and CISPR.
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC

La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des

Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC

Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la

plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Le premier dictionnaire d'électrotechnologie en ligne au monde,

webstore.iec.ch/advsearchform avec plus de 22 000 articles terminologiques en anglais et en

La recherche avancée permet de trouver des publications IEC français, ainsi que les termes équivalents dans 16 langues

en utilisant différents critères (numéro de référence, texte, additionnelles. Egalement appelé Vocabulaire

comité d’études,…). Elle donne aussi des informations sur les Electrotechnique International (IEV) en ligne.

projets et les publications remplacées ou retirées.
Glossaire IEC - std.iec.ch/glossary

IEC Just Published - webstore.iec.ch/justpublished 67 000 entrées terminologiques électrotechniques, en anglais

Restez informé sur les nouvelles publications IEC. Just et en français, extraites des articles Termes et définitions des

Published détaille les nouvelles publications parues. publications IEC parues entre 2002 et 2015. Plus certaines

Disponible en ligne et une fois par mois par email. entrées antérieures extraites des publications des CE 37, 77,

86 et CISPR de l'IEC.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
Electropedia - www.electropedia.org
---------------------- Page: 2 ----------------------
IEC 61753-1
Edition 2.0 2020-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 1: General and guidance
Dispositifs d’interconnexion et composants passifs à fibres optiques – Norme
de performance –
Partie 1 : Généralités et recommandations
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-8943-3

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 3 ----------------------
– 2 – IEC 61753-1:2018/AMD1:2020
© IEC:2020
FOREWORD
This amendment has been prepared by subcommit
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 61753-1-3:2014(Main)
Fibre optic interconnecting devices and passive components - Performance standard - Part 1-3: General and guidance for single-mode fibre optic connector and cable assembly for industrial environment, Category I

IEC 61753-1-3:2014 defines the minimum initial performance, test and measurement requirements and severities which a connector or cable assembly with single-mode fibres needs to satisfy in order to be categorized as meeting IEC Category I (industrial environment). Category I is an additional environmental category to C, U, O and E already described in IEC 61753-1. Category I is based on the MICE Table described in ISO/IEC 24702. The performance tests evaluate the product for two basic acceptance criteria: mechanical integrity and optical transmission requirements, by simulating the effects of exposure to the environment in which it will be installed, simulating installation and intervention conditions, and evaluating specified features of the product. The defined performance test procedures simulate the situation in a mated condition under use in an industrial environment. It is not the intention to simulate the situation:
- when being mated or demated;
- during the assembling of the connector;
- during transportation and storage of the connector. Reliability tests for life time expectations are not covered by this standard. Keywords: single-mode fibres, IEC Category I (industrial environment), MICE Table

  • Standard
    38 pages
    English and French language
    sale 15% off
IEC
IEC 61758-1:2008(Main)
Fibre optic interconnecting devices and passive components - Interface standard for closures - Part 1: General and guidance

IEC 61758-1:2008 provides general information and guidance on the subject of closures. It includes references, general closure and interface descriptions and definitions. Key words: interface standard for closures

  • Standard
    38 pages
    English and French language
    sale 15% off
IEC
IEC 61753-071-02:2020(Main)
Fibre optic interconnecting devices and passive components - Performance standard - Part 071-02: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments

IEC 61753-071-02:2020 contains the minimum initial test and measurement requirements and severities which non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches need to satisfy in order to be categorized as meeting the requirements of category C – controlled environments, as defined in Annex A of IEC 61753-1:2018. This first edition cancels and replaces IEC 61753-071-2 published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to
IEC 61753-071-2:2014.
a) addition of performance requirements of repeatability and switching durability;
b) deleting of performance requirements of directivity;
c) deleting of test of operational shock;
d) change of performance requirements of switching time;
e) change of test condition of high optical power;
f) harmonization of the test conditions with IEC 61753-1:2018.

  • Standard
    29 pages
    English and French language
    sale 15% off
IEC
IEC 61300-2-56:2020(Main)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-56: Tests - Wind resistance of mounted housing

IEC 61300-2-56:2020 describes the test procedure to test the wind resistance of a protective housing and its mounting hardware using the fastening parts recommended by the manufacturer. The protective housing is considered to have a cuboid shape. The applied force in this test procedure simulates a steady wind load from each direction to a protective housing and its mounting hardware fixed to a support.

  • Standard
    41 pages
    English and French language
    sale 15% off
IEC
IEC 61300-3-55:2020(Main)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-55:Examinations and measurements - Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optical components

IEC 61300-3-55: 2020 provides methods for measuring the polarisation extinction ratio (PER) of single-mode, polarisation maintaining (PM) optical components based upon PM fibres. This document also provides methods for detecting the input and output orientation of the PM components' principal axes as well as methods for estimating the keying accuracy, i.e. the angular misalignment between the principal axes and the mechanical reference guide key of the connectors, if these are present.

  • Standard
    54 pages
    English and French language
    sale 15% off
IEC
IEC 61754-35:2020(Main)
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 35: Type LSHE connector family for harsh environments

IEC 61754-35: 2020 defines the standard connector interface dimensions for LSHE family of connectors with up to four termini. This connector family is targeting deployment under harsh environmental conditions.

  • Standard
    33 pages
    English and French language
    sale 15% off
IEC
IEC 61977:2020(Main)
Fibre optic interconnecting devices and passive components - Fibre optic fixed filters - Generic specification

IEC 61977:2020 is available as IEC 61977:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61977:2020 applies to the family of fibre optic filters. These components have all of the following general features:
- they are passive for the reason that they contain no optoelectronic or other transducing elements which can process the optical signal launched into the input port;
- they modify the spectral intensity distribution in order to select some wavelengths and inhibit others;
- they are fixed, i.e. the modification of the spectral intensity distribution is fixed and cannot be tuned;
- they have input and output ports or a common port (having both functions of input and output) for the transmission of optical power; the ports are optical fibre or optical fibre connectors;
- they differ according to their characteristics. They can be divided into the following categories:
- short-wave pass (only wavelengths lower than or equal to a specified value are passed);
- long-wave pass (only wavelengths greater than or equal to a specified value are passed);
- band-pass (only an optical window is allowed);
- notch (only an optical window is inhibited);
- gain flattening (compensating the spectral profile of the device).
It is also possible to have a combination of the above categories. This document provides the generic information including terminology of IEC 61753-04x series documents. Published IEC 61753-04x series documents are listed in the Bibliography. This document establishes uniform requirements for optical, mechanical and environmental properties. This fourth edition cancels and replaces the third edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- change of the title and the scope for the limitation to fibre optic fixed filters;
- addition of new terms and definitions reflecting new title;
- removal of terms and definitions duplicated in IEC TS 62627-09;
- harmonization of the vertical axis of Figures 1 to 5;
- restructuration of Clause 4 reflecting the latest technical and market situation.

  • Standard
    52 pages
    English and French language
    sale 15% off
IEC
IEC PAS 63267-3-31:2020(Main)
Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-31: End face geometry - Flat PC PPS rectangular ferrule multimode fibres

IEC PAS 63267-3-31:2020 defines certain dimensional limits of a flat PC rectangular polyphenylene sulphide (PPS) ferrule optical interface in order to meet specific longitudinal offset requirements for fibre-to-fibre interconnection. Ferrules made from the material specified in this PAS are suitable for use in categories C, U, E, and O as defined in IEC 61753-1.
Ferrule interface dimensions and features are contained in IEC 61754 (all parts), which deals with fibre optic connector interfaces.

  • Technical specification
    16 pages
    English language
    sale 15% off
IEC
IEC 61300-2-4:2019/AMD1:2020(Main)
Amendment 1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retention
  • Standard
    5 pages
    English and French language
    sale 15% off
IEC
IEC 61300-2-54:2019(Main)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-54: Tests - Corrosive atmosphere (mixed gas)

IEC 61300-2-54:2019 is to assess the corrosive effects of atmospheres polluted with mixed gas on fibre optic devices. It can be considered as a general corrosion test, but it does not predict the performance of a device in use.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    17 pages
    English and French language
    sale 15% off