IEC PAS 62611:2009
(Main)Vacuum cleaners for commercial use - Methods for measuring performance
Vacuum cleaners for commercial use - Methods for measuring performance
IEC/PAS 62611:2009(E) gives essential performance characteristics of vacuum cleaners being of interest to the users and to describe methods for measuring these characteristics.
General Information
Relations
Standards Content (Sample)
IEC/PAS 62611 ®
Edition 1.0 2009-07
PUBLICLY AVAILABLE
SPECIFICATION
PRE-STANDARD
Vacuum cleaners for commercial use – Methods for measuring performance
IEC/PAS 62611:2009(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC/PAS 62611 ®
Edition 1.0 2009-07
PUBLICLY AVAILABLE
SPECIFICATION
PRE-STANDARD
Vacuum cleaners for commercial use – Methods for measuring performance
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XB
ICS 97.080 ISBN 978-2-88910-815-2
– 2 – PAS 62611 © IEC:2009(E)
CONTENTS
FOREWORD.6
INTRODUCTION.8
1 Scope.9
2 Normative references .9
3 Terms and definitions .9
4 General conditions for testing.11
4.1 Atmospheric conditions .11
4.2 Test equipment and materials.12
4.3 Voltage and frequency .12
4.4 Running-in of vacuum cleaner and attachments .12
4.5 Equipment of the vacuum cleaner.12
4.6 Operation of the vacuum cleaner.13
4.7 Conditioning prior to tests.13
4.8 Initial application of dust.13
4.9 Mechanical operator.13
4.10 Number of samples .13
4.11 In-house reference cleaner system(s).13
5 Dry vacuum cleaning tests.14
5.1 Dust removal from hard flat floors.14
5.1.1 Test equipment.14
5.1.2 Test area and stroke length .14
5.1.3 Removal of remaining dust .14
5.1.4 Distribution of test dust.14
5.1.5 Preconditioning of dust receptacle.14
5.1.6 Determination of dust removal ability .15
5.2 Dust removal from hard floors with uneven surfaces.15
5.2.1 Test equipment.15
5.2.2 Distribution of test dust.15
5.2.3 Determination of dust removal ability .15
5.3 Dust removal from carpets.16
5.3.1 Test carpet .16
5.3.2 Test area and stroke length .16
5.3.3 Conditioning of test carpet.17
5.3.4 Distribution of test dust.17
5.3.5 Embedding of dust into carpet .17
5.3.6 Preconditioning of dust receptacle.17
5.3.7 Determination of dust removal ability .18
5.4 Dust removal along walls.19
5.4.1 Test equipment and materials.19
5.4.2 Distribution of test dust.19
5.4.3 Determination of dust removal ability along walls.19
5.5 Fibre removal from carpets.20
5.6 Maximum usable volume of the dust receptacle.20
5.6.1 Conditions for measurement .20
PAS 62611 © IEC:2009(E) – 3 –
5.6.2 Introduction of moulding granules .20
5.6.3 Determination of maximum usable volume of dust receptacle .20
5.7 Air data .20
5.7.1 Conditions for measurement .21
5.7.2 Test equipment.21
5.7.3 Determination of air data .21
5.8 Performance with loaded dust receptacle .22
5.8.1 Determination of suction pressure change with loaded dust
receptacle .22
5.8.2 Throttling to simulate loaded dust receptacle.25
5.8.3 Determination of performance with loaded dust receptacle .26
5.9 Filtration efficiency of the vacuum cleaner.26
5.9.1 Test conditions .26
5.9.2 Determining the test dust quantity .26
5.9.3 Test procedure .26
5.9.4 Evaluation .27
5.9.5 Particle concentration and dilution .29
5.9.6 Record keeping .29
5.10 HEPA filtration equivalence of the vacuum cleaner.30
5.10.1 Object of the test .30
5.10.2 Test procedure .30
5.10.3 Determination of HEPA equivalence .30
5.11 Total emissions of the vacuum cleaner .30
5.11.1 Test method .30
6 Miscellaneous tests .30
6.1 Motion resistance .31
6.1.1 Test carpet and test equipment .31
6.1.2 Determination of motion resistance.31
6.2 Cleaning under office furniture .31
6.2.1 Distribution of test dust.32
6.2.2 Determination of free office furniture height .32
6.3 Maximum radius of operation.32
6.3.1 Conditions for measurement .32
6.3.2 Determination of radius of operation .32
6.4 Impact resistance .32
6.4.1 Test equipment.33
6.4.2 Determination of impact resistance.33
6.5 Deformation of hose and connecting tubes .33
6.5.1 Test equipment.33
6.5.2 Determination of permanent deformation .33
6.6 Bump test.34
6.6.1 Test equipment.34
6.6.2 Test cycle.35
6.6.3 Test procedure .36
6.7 Flexibility of the hose .36
6.7.1 Preparation of test object.36
6.7.2 Determination of the flexibility of the hose .37
6.8 Repeated bending of the hose.37
– 4 – PAS 62611 © IEC:2009(E)
6.8.1 Test equipment.37
6.8.2 Test method .38
6.9 Life test .38
6.10 Mass .39
6.11 Weight in hand .39
6.12 Dimensions .39
6.13 Noise level .39
6.14 Energy consumption.39
6.14.1 Energy consumption when vacuuming of carpets.39
6.14.2 Energy consumption with vacuuming of hard floors with uneven
surfaces .41
7 Test material and equipment .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.