IEC 62613-1:2011

Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) - Part 1: General requirements

IEC 62613-1:2011 applies to accessories with:
- three phases (3 poles and Earth) with up to three pilot contacts,
- one single pole (Neutral).
These accessories have rated currents not exceeding 500 A and rated operating voltages not exceeding 12 kV 50/60 Hz.

Prises de courant et connecteurs de navire pour les systèmes haute tension de raccordement des navires à quai - Partie 1: Règles générales

La CEI 62613-1:2011 s'applique aux appareils:
- triphasés (3 pôles + Terre) avec jusqu'à 3 contacts pilotes,
- unipolaires (Neutre).
de courant nominal ne dépassant pas 500 A et de tension nominale d'emploi ne dépassant pas 12 kV 50/60 Hz.

General Information

• Status: Published
• Publication Date: 28-Jun-2011
• ICS: 29.120.30 - Plugs, socket-outlets, couplers
• Technical Committee: SC 23H - Plugs, Socket-outlets and Couplers for industrial and similar applications, and for Electric Vehicles
• Current Stage: DELPUB - Deleted Publication
• Start Date: 31-Jul-2017
• Completion Date: 24-May-2019

Relations

• Revised: IEC 62613-1:2019 - Plugs, socket-outlets and ship couplers for high-voltage shore connection (HVSC) systems - Part 1: General requirements
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 62613-1 ®
Edition 1.0 2011-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Plugs, socket-outlets and ship couplers for high-voltage shore connection
systems (HVSC-Systems) –
Part 1: General requirements
Prises de courant et connecteurs de navire pour les systèmes haute tension
de raccordement des navires à quai –
Partie 1: Règles générales
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by

any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or

IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.

Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette

publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
 Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
 IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
 Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
 Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
 Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
 Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
 Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
 Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
IEC 62613-1 ®
Edition 1.0 2011-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Plugs, socket-outlets and ship couplers for high-voltage shore connection
systems (HVSC-Systems) –
Part 1: General requirements
Prises de courant et connecteurs de navire pour les systèmes haute tension
de raccordement des navires à quai –
Partie 1: Règles générales
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XA
ICS 29.120.30 ISBN 978-2-88912-545-6

– 2 – 62613-1  IEC:2011
CONTENTS
FOREWORD . 4

INTRODUCTION . 6

1 Scope . 7

2 Normative references . 7

3 Terms and definitions . 8

4 General . 11

5 Standard ratings . 12

6 Classification . 13
7 Marking . 13
8 Dimensions . 15
9 Protection against electric shock . 16
10 Provision for Earthing . 16
11 Terminals and terminations . 18
12 Locking devices and interlocks . 23
13 Resistance to ageing of rubber and thermoplastic material . 24
14 General construction . 24
15 Construction of socket-outlets and ship inlets . 26
16 Construction of ship connectors . 26
17 Construction of plugs . 26
18 Degrees of protection . 27
19 Insulation resistance, dielectric withstand and partial discharge tests . 28
20 Normal operation . 30
21 Temperature rise . 31
22 Flexible cables and their connection . 32
23 Mechanical strength . 35
24 Screws, current-carrying parts and connections . 36
25 Resistance to heat, to fire and to tracking . 38
26 Corrosion and resistance to rusting . 40
27 Conditional short-circuit current withstand test . 40

28 Electromagnetic compatibility . 42
Bibliography . 52

Figure 1 – Diagram showing the use of the accessories . 43
Figure 2 – Standard test finger. 44
Figure 3 – Circuit diagrams for normal operation tests of 3P+E accessories and 3P+E
with separate Neutral accessories . 45
Figure 4 – Apparatus for testing the cable anchorage . 46
Figure 5 – Arrangement for mechanical strength test for plugs and ship connectors. 46
Figure 6 – Gauges for testing insertability of round unprepared conductors having the
maximum specified cross-section . 47
Figure 7 – Examples of terminals . 49
Figure 8 – Test apparatus for checking damage to conductors . 49

62613-1  IEC:2011 – 3 –
Figure 9 – Diagram of the test circuit for the verification of short-circuit current

withstand of a three-pole equipment . 50

Figure 10 – Diagram of the test circuit for the verification of short-circuit current

withstand of a Three-Phase and separate Neutral accessories . 51

Table 1 – Size for connectable conductors . 18

Table 2 – Test values for flexing tests for copper conductors . 22

Table 3 – Test values for pull-out tests for copper conductors . 23

Table 4 – Test voltage for dielectric strength test of pilot contacts . 29

Table 5 – Dielectric withstand test voltage . 30
Table 6 – Test current and conductor cross-section for temperature rise. 32
Table 7 – Maximum surface temperatures . 32
Table 8 – Flexible cable types and dimensions, including conductor sizes and wire
type . 34
Table 9 – Cable secureness test values . 34
Table 10 – Screw sizes and torque test values . 37

– 4 – 62613-1  IEC:2011
INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
PLUGS, SOCKET-OUTLETS AND SHIP COUPLERS

FOR HIGH-VOLTAGE SHORE CONNECTION SYSTEMS

(HVSC-SYSTEMS) –
Part 1: General requirements
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or r
...