IEC 60749-7:2011

Semiconductor devices - Mechanical and climatic test methods - Part 7: Internal moisture content measurement and the analysis of other residual gases

IEC 60749-7:2011 specifies the testing and measurement of water vapour and other gas content of the atmosphere inside a metal or ceramic hermetically sealed device. The test is used as a measure of the quality of the sealing process and to provide information about the long-term chemical stability of the atmosphere inside the package. It is applicable to semiconductor devices sealed in such a manner but generally only used for high reliability applications such as military or aerospace. This test is destructive. This second edition cancels and replaces the first edition published in 2002 and constitutes a technical revision. This second edition has been completely re-written so as to align it with the text of the latest versions of MIL-STD-750, method 1018 and MIL-STD-883, method 1018. The main change is the removal of the two alternative methods formerly designated method 2 and method 3.

Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 7: Mesure de la teneur en humidité interne et analyse des autres gaz résiduels

La CEI 60749-7:2011 spécifie les essais et les mesures de la teneur en vapeur d'eau et en autres gaz de l'atmosphère à l'intérieur d'un dispositif métallique ou céramique scellé hermétiquement. L'essai est utilisé en tant que mesure de la qualité du procédé de scellement et en vue de fournir des informations sur la stabilité chimique à long terme de l'atmosphère à l'intérieur du boîtier. Il est applicable à tous les dispositifs à semiconducteurs scellés de cette manière mais généralement réservés pour les applications à haute fiabilité comme dans les domaines militaire et spatial. Le présent essai est destructif. Cette deuxième édition annule et remplace la première édition parue en 2002, dont elle constitue une révision technique. Cette seconde édition a été complètement remaniée de manière à l'aligner sur le texte des dernières versions de la MIL-STD-750, méthode 1018 et la MIL-STD-883, méthode 1018. La modification principale est la suppression des deux méthodes alternatives, anciennement désignées méthode 2 et méthode 3.

General Information

• Status: Published
• Publication Date: 16-Jun-2011
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 31.080.01 - Semiconductor devices in general
• Technical Committee: TC 47 - Semiconductor devices
• Drafting Committee: WG 2 - TC 47/WG 2
• Current Stage: PPUB - Publication issued
• Start Date: 30-Jun-2011
• Completion Date: 17-Jun-2011

Relations

• Revises: IEC 60749-7:2002 - Semiconductor devices - Mechanical and climatic test methods - Part 7: Internal moisture content measurement and the analysis of other residual gases
• Effective Date: 05-Sep-2023
• Revises: IEC 60749-7:2002/COR1:2003 - Corrigendum 1 - Semiconductor devices - Mechanical and climatic test methods - Part 7: Internal moisture content measurement and the analysis of other residual gases
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 60749-7 ®
Edition 2.0 2011-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Semiconductor devices – Mechanical and climatic test methods –
Part 7: Internal moisture content measurement and the analysis of other residual
gases
Dispositifs à semiconducteurs – Méthodes essais mécaniques et climatiques –
Partie 7: Mesure de la teneur en humidité interne et analyse des autres gaz
résiduels
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
 Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
 IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
 Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
 Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
 Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
 Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
 Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
 Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
IEC 60749-7 ®
Edition 2.0 2011-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Semiconductor devices – Mechanical and climatic test methods –
Part 7: Internal moisture content measurement and the analysis of other residual
gases
Dispositifs à semiconducteurs – Méthodes essais mécaniques et climatiques –
Partie 7: Mesure de la teneur en humidité interne et analyse des autres gaz
résiduels
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX L
ICS 31.080.01 ISBN 978-2-88912-532-6

– 2 – 60749-7  IEC:2011
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Test apparatus . 5
4.1 Mass spectrometer method . 5
4.2 Mass spectrometer . 5
4.2.1 Spectra range . 5
4.2.2 Detection limit . 6
4.2.3 System calibration . 6
4.2.4 Calibration for other gases . 6
4.2.5 Daily calibration check . 7
4.2.6 Substitution . 7
4.2.7 Precision tuning . 7
4.2.8 Record keeping . 7
4.3 Vacuum opening chamber . 7
4.4 Piercing arrangement . 7
4.5 Pressure-sensing device . 7
5 Procedure . 8
6 Failure criteria . 9
7 Implementation . 9
8 Summary . 10
Bibliography . 11

60749-7  IEC:2011 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SEMICONDUCTOR DEVICES –
MECHANICAL AND CLIMATIC TEST METHODS –

Part 7: Internal moisture content measurement
and the analysis of other residual gases

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60749-7 has been prepared by IEC technical committee 47:
Semiconductor devices.
This second edition cancels and replaces the first edition published in 2002 and constitutes a
technical revision. This second edition has been completely re-written so as to align it with the
text of the latest versions of MIL-STD-750, method 1018 and MIL-STD-883, method 1018.
The main change is the removal of the two alternative methods formerly designated method 2
and method 3.
– 4 – 60749-7  IEC:2011
The text of this standard is based on the following documents:
FDIS Report on voting
47/2087/FDIS 47/2098/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 60749 series, under the general title Semiconductor devices –
Mechanical and climatic test methods, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
60749-7  IEC:2011 – 5 –
SEMICONDUCTOR DEVICES –
MECHANICAL AND CLIMATIC TEST METHODS –

Part 7: Internal moisture content measurement
and the analysis of other residual gases

1 Scope
This International Standard specifies the testing and measurement of water vapour and other
gas content of the atmosphere inside a metal or ceramic hermetically sealed device. The test
is used as a measure of the quality of the sealing process and to provide information about
the long-term chemical stability of the atmosphere inside the package. It is applicable to
semiconductor devices sealed in such a manner but generally only used for high reliability
applications such as military or aerospace. This test is destructive.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
None
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
parts per million by volume
ppmv
the concentration of one substance in another substance expressed as a ratio of parts of the
one substance in a million parts of the othe
...