IEC 60745-2-6:2003

Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers

Deals with the safety of hand-held motor-operated or magnetically driven tools, specifically hammers.The rated voltage of the hammers is not more than 250 V for single-phase a.c. or d.c., and 440 V for three-phase a.c. tools. Tools covered by this standard include but are not limited to percussion and rotary hammers.

Outils électroportatifs à moteur - Sécurité - Partie 2-6: Règles particulières pour les marteaux

Traite de la sécurité des outils portatifs à moteur ou à entraînement magnétique, spécialement des marteaux. La tension assignée des marteaux n'est pas supérieure à 250 V pour les outils monophasés à courant alternatif ou continu et à 440 V pour les outils triphasés à courant alternatif. Le domaine d'application de la présente norme comprend les marteaux à percussion et les marteaux rotatifs mais n'est pas limité à ces seuls outils

General Information

• Status: Published
• Publication Date: 26-Jan-2003
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 25.140.20 - Electric tools
• Technical Committee: TC 116 - Safety of motor-operated electric tools
• Current Stage: PPUB - Publication issued
• Start Date: 15-Sep-2002
• Completion Date: 27-Jan-2003

Relations

• Amended By: IEC 60745-2-6:2003/AMD1:2006 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers
• Effective Date: 05-Sep-2023
• Amended By: IEC 60745-2-6:2003/AMD2:2008 - Amendment 2 - Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers
• Effective Date: 05-Sep-2023
• Revises: IEC 60745-2-6:1989 - Safety of hand-held motor-operated electric tools. Part 2: Particular requirements for hammers
• Effective Date: 05-Sep-2023

Standards Content (Sample)

INTERNATIONAL IEC
STANDARD
60745-2-6
Second edition
2003-01
Hand-held motor-operated electric tools –
Safety –
Part 2-6:
Particular requirements for hammers
Outils électroportatifs à moteur –
Sécurité –
Partie 2-6:
Règles particulières pour les marteaux
Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.
Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,
edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (http://www.iec.ch/searchpub/cur_fut.htm)
enables you to search by a variety of criteria including text searches, technical
committees and date of publication. On-line information is also available on
recently issued publications, withdrawn and replaced publications, as well as
corrigenda.
• IEC Just Published
This summary of recently issued publications (http://www.iec.ch/online_news/
justpub/jp_entry.htm) is also available by email. Please contact the Customer
Service Centre (see below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:
Email: [e-mail]
Tel: [phone]
Fax: [phone]
INTERNATIONAL IEC
STANDARD
60745-2-6
Second edition
2003-01
Hand-held motor-operated electric tools –
Safety –
Part 2-6:
Particular requirements for hammers
Outils électroportatifs à moteur –
Sécurité –
Partie 2-6:
Règles particulières pour les marteaux
 IEC 2003  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail]  Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale
M
International Electrotechnical Commission
Международная Электротехническая Комиссия
For price, see current catalogue

– 2 – 60745-2-6  IEC:2003(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS –
SAFETY –
Part 2-6: Particular requirements for hammers
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60745-2-6 has been prepared by subcommittee 61F: Safety of
hand-held motor-operated electric tools, of IEC technical committee 61: Safety of household
and similar electrical appliances
This second edition cancels and replaces the first edition published in 1989, of which it
constitutes a technical revision.
The text of this standard is based on the following documents:
FDIS Report on voting
61F/463/FDIS 61F/487/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
This Part 2-6 is to be used in conjunction with the third edition of IEC 60745-1: Safety of
hand-held motor-operated electric tools – Part 1: General requirements. When this standard
states “addition”, “modification” or “replacement”, the relevant text in Part 1 is to be adapted
accordingly.
60745-2-6 © IEC:2003(E) – 3 –
NOTE in this standard, the following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in smaller roman type.
Subclauses, tables and figures which are additional to those in Part 1 are numbered starting from 101; additional
annexes are lettered AA, BB, etc.
The committee has decided that the contents of this publication will remain unchanged until
January 2007. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

– 4 – 60745-2-6  IEC:2003(E)
HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS –
SAFETY –
Part 2-6: Particular requirements for hammers
1 Scope
This clause of Part 1 is applicable, except as follows:
1.1 Addition:
This standard applies to hammers.
Tools covered by this standard include but are not limited to percussion and rotary hammers.
2 Normative references
This clause of Part 1 is applicable.
3 Definitions
This clause of Part 1 is applicable, except as follows:
Additional definitions:
3.101
percussion hammer
tool equipped with a built-in percussion system which is not influenced by the operator
3.102
rotary hammer
tool equipped with a built-in percussion system which is not influenced by the operator and
also has the capability of rotational motion
3.103
rotary hammer with “drill only mode”
rotary hammer able to rotate only with the percussion system disengaged
4 General requirements
This clause of Part 1 is applicable.
5 General conditions for the tests
This clause of Part 1 is applicable.
6 Void
60745-2-6 © IEC:2003(E) – 5 –
7 Classification
This clause of Part 1 is applicable.
8 Marking and instructions
This clause of Part 1 is applicable, except as follows:
8.12.1 Addition:
− Wear ear protectors. Exposure to noise can cause hearing loss.
− Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.
9 Protection against access to live parts
This clause of Part 1 is applicable.
10 Starting
This clause of Part 1 is applicable.
11 Input and current
This clause of Part 1 is applicable.
12 Heating
This clause of Part 1 is applicable, except as follows:
12.4 Replacement:
The tool is operated intermittently until the temperature stabilises or for 30 cycles, whichever
is achieved first, each cycle comprising a period of operation of 30 s and a rest period of 90 s
with the tool switched off. During the periods of operation the tool is loaded by means of a
brake adjusted so as to attain rated input or rated current, the hammer mechanism being
disengaged or removed. At the manufacturer’s option, the tool may also be operated
continuously until thermal stabilisation. The temperature-rise limit specified for the external
enclosure does not apply to the enclosure of the hammer mechanism.
13 Leakage current
This clause of Part 1 is applicable.
14 Moisture resistance
This clause of Part 1 is applicable.
15 Electric strength
This clause of Part 1 is applicable.

– 6 – 60745-2-6  IEC:2003(E)
16 Overload protection of transformers and associated circuits
This clause of Part 1 is applicable.
17 Endurance
This clause of Part 1 is applicable, except as follows:
17.2 Replacement:
Rotary hammers with “drill only mode” are operated at no-load with the impact mechanism
disengaged for 12 h at a voltage equal to 1,1 times the rated voltage, and then for 12 h at
a voltage equal to 0,9 times rated voltage.
Each cycle of operation comprises an “on” period of 100 s and an “off” period of 20 s, the “off”
periods being included in the specified operating time.
During the test, the tool is placed in three different positions, the operating time, at each
voltage, being approximately 4 h for each position.
NOTE The change of position is made to prevent abnormal accumulation of carbon dust in any particular place.
Examples for the three positions are horizontal, vertically up and vertically down.
All hammers, including hammers with drill only mode, are mounted vertically in a test
apparatus as shown in Figure 103 and are operated at rated voltage or at the mean value of
the rated voltage range, for f
...

NORME CEI
INTERNATIONALE
IEC
60745-2-6
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2003-01
Outils électroportatifs à moteur –
Sécurité –
Partie 2-6:
Règles particulières pour les marteaux

Hand-held motor-operated electric tools –
Safety –
Part 2-6:
Particular requirements for hammers
Numéro de référence
Reference number
CEI/IEC 60745-2-6:2003
Numérotation des publications Publication numbering
Depuis le 1er janvier 1997, les publications de la CEI As from 1 January 1997 all IEC publications are
sont numérotées à partir de 60000. Ainsi, la CEI 34-1 issued with a designation in the 60000 series. For
devient la CEI 60034-1. example, IEC 34-1 is now referred to as IEC 60034-1.
Editions consolidées Consolidated editions
Les versions consolidées de certaines publications de la The IEC is now publishing consolidated versions of its
CEI incorporant les amendements sont disponibles. Par publications. For example, edition numbers 1.0, 1.1
exemple, les numéros d’édition 1.0, 1.1 et 1.2 indiquent and 1.2 refer, respectively, to the base publication,
respectivement la publication de base, la publication de the base publication incorporating amendment 1 and
base incorporant l’amendement 1, et la publication de the base publication incorporating amendments 1
base incorporant les amendements 1 et 2. and 2.
Informations supplémentaires Further information on IEC publications
sur les publications de la CEI
Le contenu technique des publications de la CEI est The technical content of IEC publications is kept
constamment revu par la CEI afin qu'il reflète l'état under constant review by the IEC, thus ensuring that
actuel de la technique. Des renseignements relatifs à the content reflects current technology. Information
cette publication, y compris sa validité, sont dispo- relating to this publication, including its validity, is
nibles dans le Catalogue des publications de la CEI available in the IEC Catalogue of publications
(voir ci-dessous) en plus des nouvelles éditions, (see below) in addition to new editions, amendments
amendements et corrigenda. Des informations sur les and corrigenda. Information on the subjects under
sujets à l’étude et l’avancement des travaux entrepris consideration and work in progress undertaken by the
par le comité d’études qui a élaboré cette publication, technical committee which has prepared this
ainsi que la liste des publications parues, sont publication, as well as the list of publications issued,
également disponibles par l’intermédiaire de: is also available from the following:
• Site web de la CEI (www.iec.ch) • IEC Web Site (www.iec.ch)
• Catalogue des publications de la CEI • Catalogue of IEC publications
Le catalogue en ligne sur le site web de la CEI The on-line catalogue on the IEC web site
(www.iec.ch/searchpub) vous permet de faire des (www.iec.ch/searchpub) enables you to search by a
recherches en utilisant de nombreux critères, variety of criteria including text searches,
comprenant des recherches textuelles, par comité technical committees and date of publication. On-
d’études ou date de publication. Des informations en line information is also available on recently
ligne sont également disponibles sur les nouvelles issued publications, withdrawn and replaced
publications, les publications remplacées ou retirées, publications, as well as corrigenda.
ainsi que sur les corrigenda.
• IEC Just Published • IEC Just Published
Ce résumé des dernières publications parues This summary of recently issued publications
(www.iec.ch/online_news/justpub) est aussi dispo- (www.iec.ch/online_news/justpub) is also available
nible par courrier électronique. Veuillez prendre by email. Please contact the Customer Service
contact avec le Service client (voir ci-dessous) Centre (see below) for further information.
pour plus d’informations.
• Service clients • Customer Service Centre
Si vous avez des questions au sujet de cette If you have any questions regarding this
publication ou avez besoin de renseignements publication or need further assistance, please
supplémentaires, prenez contact avec le Service contact the Customer Service Centre:
clients:
Email: [e-mail] Email: [e-mail]
Tél: [phone] Tel: [phone]
Fax: [phone] Fax: [phone]
.
NORME CEI
INTERNATIONALE
IEC
60745-2-6
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2003-01
Outils électroportatifs à moteur –
Sécurité –
Partie 2-6:
Règles particulières pour les marteaux

Hand-held motor-operated electric tools –
Safety –
Part 2-6:
Particular requirements for hammers

 IEC 2003 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
N
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

– 2 – 60745-2-6  CEI:2005
SOMMAIRE
AVANT-PROPOS.6
1 Domaine d'application .10
2 Références normatives.10
3 Définitions .10
4 Exigences générales .10
5 Conditions générales d'essais .10
6 Vacant.12
7 Classification.12
8 Marquage et indications .12
9 Protection contre l'accès aux parties actives .12
10 Démarrage .12
11 Puissance et courant .12
12 Echauffements .12
13 Courant de fuite.12
14 Résistance à l'humidité.12
15 Rigidité diélectrique.14
16 Protection contre la surcharge des transformateurs et des circuits associés.14
17 Endurance.14
18 Fonctionnement anormal .16
19 Dangers mécaniques.16
20 Résistance mécanique .16
21 Construction .18
22 Conducteurs internes .18
23 Composants .18
24 Raccordement au réseau et câbles souples extérieurs .18
25 Bornes pour conducteurs externes .18
26 Dispositions en vue de la mise à la terre .18
27 Vis et connexions .18
28 Lignes de fuite, distances dans l'air et distances à travers l’isolation .20
29 Résistance à la chaleur, au feu et aux courants de cheminement .20
30 Protection contre la rouille.20
31 Rayonnement, toxicité et dangers analogues.20

Annexes .28
Annexe K (normative) Outils fonctionnant sur batteries et blocs de batteries .28
Annexe L (normative).28
Outils fonctionnant sur batteries et blocs de batteries équipés d’une connexion avec le
réseau ou avec des sources non isolées.28

Bibliographie.28

60745-2-6  IEC:2005 – 3 –
CONTENTS
FOREWORD.7
1 Scope.11
2 Normative references .11
3 Definitions .11
4 General requirements .11
5 General conditions for the tests .11
6 Void.13
7 Classification.13
8 Marking and instructions.13
9 Protection against access to live parts.13
10 Starting .13
11 Input and current .13
12 Heating .13
13 Leakage current .13
14 Moisture resistance .13
15 Electric strength .15
16 Overload protection of transformers and associated circuits .15
17 Endurance.15
18 Abnormal operation .17
19 Mechanical hazards.17
20 Mechanical strength .17
21 Construction .19
22 Internal wiring.19
23 Components .19
24 Supply connection and external flexible cords .19
25 Terminals for external conductors.19
26 Provision for earthing .19
27 Screws and connections .19
28 Creepage distances, clearances and distances through insulation.21
29 Resistance to heat, fire and tracking.21
30 Resistance to rusting.21
31 Radiation, toxicity and similar hazards.21

Annexes .29
Annex K (normative) Batter
...

NORME CEI
INTERNATIONALE
IEC
60745-2-6
INTERNATIONAL
Edition 2.1
STANDARD
2006-03
Edition 2:2003 consolidée par l'amendement 1:2006
Edition 2:2003 consolidated with amendment 1:2006
Outils électroportatifs à moteur –
Sécurité –
Partie 2-6:
Règles particulières pour les marteaux

Hand-held motor-operated electric tools –
Safety –
Part 2-6:
Particular requirements for hammers

Numéro de référence
Reference number
CEI/IEC 60745-2-6:2003+A1:2006

Numérotation des publications Publication numbering

Depuis le 1er janvier 1997, les publications de la CEI As from 1 January 1997 all IEC publications are

sont numérotées à partir de 60000. Ainsi, la CEI 34-1 issued with a designation in the 60000 series. For

devient la CEI 60034-1. example, IEC 34-1 is now referred to as IEC 60034-1.

Editions consolidées Consolidated editions

Les versions consolidées de certaines publications de la The IEC is now publishing consolidated versions of its

CEI incorporant les amendements sont disponibles. Par publications. For example, edition numbers 1.0, 1.1

exemple, les numéros d’édition 1.0, 1.1 et 1.2 indiquent and 1.2 refer, respectively, to the base publication,
respectivement la publication de base, la publication de the base publication incorporating amendment 1 and
base incorporant l’amendement 1, et la publication de the base publication incorporating amendments 1
base incorporant les amendements 1 et 2. and 2.
Informations supplémentaires Further information on IEC publications
sur les publications de la CEI
Le contenu technique des publications de la CEI est The technical content of IEC publications is kept
constamment revu par la CEI afin qu'il reflète l'état under constant review by the IEC, thus ensuring that
actuel de la technique. Des renseignements relatifs à the content reflects current technology. Information
cette publication, y compris sa validité, sont dispo- relating to this publication, including its validity, is
nibles dans le Catalogue des publications de la CEI available in the IEC Catalogue of publications
(voir ci-dessous) en plus des nouvelles éditions, (see below) in addition to new editions, amendments
amendements et corrigenda. Des informations sur les and corrigenda. Information on the subjects under
sujets à l’étude et l’avancement des travaux entrepris consideration and work in progress undertaken by the
par le comité d’études qui a élaboré cette publication, technical committee which has prepared this
ainsi que la liste des publications parues, sont publication, as well as the list of publications issued,
également disponibles par l’intermédiaire de: is also available from the following:
• Site web de la CEI (www.iec.ch) • IEC Web Site (www.iec.ch)
• Catalogue des publications de la CEI • Catalogue of IEC publications
Le catalogue en ligne sur le site web de la CEI The on-line catalogue on the IEC web site
(www.iec.ch/searchpub) vous permet de faire des (www.iec.ch/searchpub) enables you to search by a
recherches en utilisant de nombreux critères, variety of criteria including text searches,
comprenant des recherches textuelles, par comité technical committees and date of publication. On-
d’études ou date de publication. Des informations en line information is also available on recently
ligne sont également disponibles sur les nouvelles issued publications, withdrawn and replaced
publications, les publications remplacées ou retirées, publications, as well as corrigenda.
ainsi que sur les corrigenda.
• IEC Just Published • IEC Just Published
Ce résumé des dernières publications parues This summary of recently issued publications
(www.iec.ch/online_news/justpub) est aussi dispo- (www.iec.ch/online_news/justpub) is also available
nible par courrier électronique. Veuillez prendre by email. Please contact the Customer Service
contact avec le Service client (voir ci-dessous) Centre (see below) for further information.
pour plus d’informations.
• Service clients • Customer Service Centre
Si vous avez des questions au sujet de cette If you have any questions regarding this
publication ou avez besoin de renseignements publication or need further assistance, please
supplémentaires, prenez contact avec le Service contact the Customer Service Centre:
clients:
Email: [e-mail] Email: [e-mail]
Tél: [phone] Tel: [phone]
Fax: [phone] Fax: [phone]
.
NORME CEI
INTERNATIONALE
IEC
60745-2-6
INTERNATIONAL
Edition 2.1
STANDARD
2006-03
Edition 2:2003 consolidée par l'amendement 1:2006
Edition 2:2003 consolidated with amendment 1:2006
Outils électroportatifs à moteur –
Sécurité –
Partie 2-6:
Règles particulières pour les marteaux

Hand-held motor-operated electric tools –
Safety –
Part 2-6:
Particular requirements for hammers

 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
CE
Commission Electrotechnique Internationale
PRICE CODE
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

– 2 – 60745-2-6  CEI:2003+A1:2006

SOMMAIRE
AVANT-PROPOS.6

1 Domaine d'application .10

2 Références normatives.10

3 Définitions .10

4 Exigences générales .10

5 Conditions générales d'essais .10
6 Vacant.12
7 Classification.12
8 Marquage et indications .12
9 Protection contre l'accès aux parties actives .12
10 Démarrage .12
11 Puissance et courant .12
12 Echauffements .12
13 Courant de fuite.12
14 Résistance à l'humidité.12
15 Rigidité diélectrique.14
16 Protection contre la surcharge des transformateurs et des circuits associés.14
17 Endurance.14
18 Fonctionnement anormal .16
19 Dangers mécaniques.16
20 Résistance mécanique .16
21 Construction .18
22 Conducteurs internes .18
23 Composants .18
24 Raccordement au réseau et câbles souples extérieurs .18
25 Bornes pour conducteurs externes .18
26 Dispositions en vue de la mise à la terre .18

27 Vis et connexions .20
28 Lignes de fuite, distances dans l'air et distances à travers l’isolation .20
29 Résistance à la chaleur, au feu et aux courants de cheminement .20
30 Protection contre la rouille.20
31 Rayonnement, toxicité et dangers analogues.20

Annexes .28
Annexe K (normative) Outils fonctionnant sur batteries et blocs de batteries .28
Annexe L (normative) Outils fonctionnant sur batteries et blocs de batteries équipés
d’une connexion avec le réseau ou avec des sources non isolées .28

60745-2-6  IEC:2003+A1:2006 – 3 –

CONTENTS
FOREWORD.7

1 Scope.11

2 Normative references .11

3 Definitions .11

4 General requirements .11

5 General conditions for the tests .11
6 Void.13
7 Classification.13
8 Marking and instructions.13
9 Protection against access to live parts.13
10 Starting .13
11 Input and current .13
12 Heating .13
13 Leakage current .13
14 Moisture resistance .13
15 Electric strength .15
16 Overload protection of transformers and associated circuits .15
17 Endurance.15
18 Abnormal operation .17
19 Mechanical hazards.17
20 Mechanical strength .17
21 Construction .19
22 Internal wiring.19
23 Components .19
24 Supply connection and external flexible cords .19
25 Terminals for external conductors.19
26 Provision for earthing .19

27 Screws and connections .21
28 Creepage distances, clearances and distances through insulation.21
29 Resistance to heat, fire and tracking.21
30 Resistance to rusting.21
31 Radiation, toxicity and similar hazards.21

Annexes .29
...

IEC 60745-2-6 ®
Edition 2.2 2008-08
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Hand-held motor-operated electric tools – Safety –
Part 2-6: Particular requirements for hammers

Outils électroportatifs à moteur – Sécurité –
Partie 2-6: Règles particulières pour les marteaux

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 15 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: [e-mail].
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 20 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 15
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC
65 000 entrées terminologiques électrotechniques, en anglais
en utilisant différents critères (numéro de référence, texte,
et en français, extraites des articles Termes et Définitions des
comité d’études,…). Elle donne aussi des informations sur les
publications IEC parues depuis 2002. Plus certaines entrées
projets et les publications remplacées ou retirées.
antérieures extraites des publications des CE 37, 77, 86 et

CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Restez informé sur les nouvelles publications IEC. Just Service Clients - webstore.iec.ch/csc
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
[e-mail].
IEC 60745-2-6 ®
Edition 2.2 2008-08
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Hand-held motor-operated electric tools – Safety –

Part 2-6: Particular requirements for hammers

Outils électroportatifs à moteur – Sécurité –

Partie 2-6: Règles particulières pour les marteaux

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.140.20 ISBN 2-8318-9912-5

– 2 – 60745-2-6  IEC:2003+A1:2006
+A2:2008
CONTENTS
FOREWORD . 4

1 Scope . 6
2 Normative references . 6
2 3 Terms and definitions. 6
4 General requirements . 6
5 General conditions for the tests . 6
6 Void. 7
7 Classification . 7
8 Marking and instructions . 7
9 Protection against access to live parts . 7
10 Starting . 7
11 Input and current . 7
12 Heating . 7
13 Leakage current . 7
14 Moisture resistance . 8
15 Electric strength . 8
16 Overload protection of transformers and associated circuits . 8
17 Endurance . 8
18 Abnormal operation . 9
19 Mechanical hazards . 9
20 Mechanical strength . 9
21 Construction . 10
22 Internal wiring . 10
23 Components . 10
24 Supply connection and external flexible cords . 11
25 Terminals for external conductors . 11
26 Provision for earthing . 11
27 Screws and connections . 11
28 Creepage distances, clearances and distances through insulation . 11
29 Resistance to heat, fire and tracking . 11
30 Resistance to rusting . 11
31 Radiation, toxicity and similar hazards . 11

Annexes . 15
Annex K (normative) Battery tools and battery packs . 15
Annex L (normative) Battery tools and battery packs provided with mains connection
or non-isolated sources. 15

Bibliography . 15

60745-2-6  IEC:2003+A1:2006 – 3 –
+A2:2008
Figure 101 – Single-hand support . 12
Figure 102 – Double-hand support . 13
Figure 103 – Testing apparatus for hammers . 14

– 4 – 60745-2-6  IEC:2003+A1:2006
+A2:2008
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS –
SAFETY –
Part 2-6: Particular requirements for hammers

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or fo
...