IEC TR 62629-51-1:2020
(Main)3D display devices - Part 51-1: Generic introduction of aerial display
3D display devices - Part 51-1: Generic introduction of aerial display
IEC TR 62629-51-1:2020 (E), which is a Technical Report, provides general information for the standardization of aerial displays. This document includes an overview of the technology, critical performance characteristics, issues of optical measurements, and other information.
General Information
This May Also Interest You
IEC 62595-1-2:2024 gives the preferred terms, their definitions and symbols, for display lighting units such as backlight units of transmissive and transflective displays, and frontlight units of reflective displays, with the objective of using standardized terminology when publications are prepared.
- Standard38 pagesEnglish languagesale 15% off
- Standard1 pageEnglish languagesale 15% off
IEC 62341-6-7:2024 specifies the standard measuring conditions and measuring methods for determining the optical characteristics of an OLED display with under-screen camera; other under-screen features, such as under-screen fingerprint or under-screen time of flight (TOF) can also be applied. This document applies to OLED displays such as mobile phone, monitor and TV with under-screen features.
NOTE Under-screen feature will want the display to be partially transparent and partially non-transparent, and this can be achieved only by certain types of display technology, for example OLED. This document mainly focuses on OLED display with under-screen feature.
- Standard21 pagesEnglish languagesale 15% off
IEC 62977-2-7:2024 specifies standard measuring conditions and measurement methods for determining the optical characteristics of tiled displays which consist of multiple display modules in order to form one screen. These methods apply to emissive and transmissive direct view flat displays that render real 2D images with all modules lying in the same plane. The methods are applicable in environments where the measuring conditions can be controlled, such as laboratory and production testing.
NOTE The measurement results are not specific values for the products. They can vary according to the measurement method and light measuring device (LMD) used in the calibration.
- Standard23 pagesEnglish languagesale 15% off
IEC 62629-52-1:2024 specifies the standard measurement methods and measurement conditions for determining the optical properties of aerial displays. This document excludes image quality of aerial displays, such as modulation transfer function (MTF) and resolution measurements.
- Standard24 pagesEnglish languagesale 15% off
IEC 62977-2-11:2023 specifies the local luminance and uniformity measurement methods of emissive displays. The light measuring device’s (LMD) measurement field will cover more than 500 pixels of TVs, monitors or signage displays. The local luminance and uniformity measurement methods identify optical variations within the local block where over 500 emission pixels are regularly placed.
- Standard20 pagesEnglish languagesale 15% off
IEC 62977-3-5:2023 specifies standard evaluation methods for determining the colour capabilities of electronic display modules and systems with respect to colour accuracy, colour gamut volume, and their intersection with a reference colour space. Also included is evaluation with respect to the chromaticity gamut area. These methods apply to emissive and transmissive direct view displays that render real 2D images on a flat panel or on a curved panel with a local radius of curvature larger than 1 500 mm. This document evaluates the optical characteristics of these displays under darkroom conditions. This document applies to the testing of display performance in response to standard analogue or digital input signals that are not absolute luminance encoded. The input signal is relative RGB without metadata information that codes for real luminance, colour space or colour coordinates. These methods are limited to input signals with typical opto-electronic transfer functions (OETFs) such as defined in IEC 61966‑2‑1, Recommendation ITU-R BT.601 [18][1], Recommendation ITU-R BT.709, and Recommendation ITU-R BT.2020. The tests in this document are not suitable for use with HDR input signals.
This document contains attached files in the form of Microsoft Excel spreadsheet and App installer. These files are intended to be used as a complement and do not form an integral part of the standard.
The content of the corrigendum 1 (2024-10) has been included in this copy.
- Standard63 pagesEnglish languagesale 15% off
IEC 62977-3-9:2023 specifies standard measurement conditions and methods for determining the sparkle contrast of direct-view displays which comprise display matrix elements to render real 2D images on a flat panel and an anti-glare layer. This document excludes measurement of sparkle, which is intentionally obtained by the specular reflection from reflecting flakes in coatings and paints.
- Standard32 pagesEnglish languagesale 15% off
IEC 62977-3-4:2023 specifies the standard evaluation methods for determining the optical characteristics of HDR electronic display modules and systems. These methods apply to emissive and transmissive direct-view displays that render real 2D images on a flat panel or on a curved panel with a local radius of curvature larger than 1 500 mm. This document evaluates the optical characteristics of these displays under darkroom conditions. This document applies to the testing of display performance in response to HDR digital input signals that are absolute luminance encoded such as the HDR signal comprising RGB component values of Recommendation ITU-R BT.2020 colorimetry with SMPTE ST 2084 PQ luminance encoding and SMPTE ST 2086 metadata.
- Standard44 pagesEnglish languagesale 15% off
IEC TR 62595-1-5:2022(E), which is a Technical Report, provides information for the future standardization of the electrical signal interface of LED backlight units for liquid crystal display television sets, which include control signals, control data and LED driver interface. This document only provides information about 2-D local dimming LED backlight units, with or without local boosting.
NOTE All values and parameters of this document are examples.
- Technical report16 pagesEnglish languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.