IEC TR 62629-51-1:2020
(Main)3D display devices - Part 51-1: Generic introduction of aerial display
3D display devices - Part 51-1: Generic introduction of aerial display
IEC TR 62629-51-1:2020 (E), which is a Technical Report, provides general information for the standardization of aerial displays. This document includes an overview of the technology, critical performance characteristics, issues of optical measurements, and other information.
General Information
This May Also Interest You
IEC TR 62595-1-6:2025 is a technical report that provides general information for future standardization of quantum dot light converting unit (including quantum dot films and quantum dot diffuser plates) used in backlight units and provides examples of the effect of quantum dot light converting unit on the optical characteristics of backlight after environmental test.
- Technical report21 pagesEnglish languagesale 15% off
IEC 62977-2-8:2025 specifies standard measurement conditions and methods for determining the optical characteristics of reflective direct view displays that render real 2D images on a flat panel. This document applies to flat panel displays operated in a reflective mode with any integrated light sources turned off during measurement. The input signal is unbounded and encodes either monochrome or colour images.
- Standard65 pagesEnglish languagesale 15% off
IEC 62977-3-6:2025 specifies the measuring and evaluation methods of spatial resolution of flat panel emissive displays, by determining their contrast modulation and modulation transfer function (MTF).
- Standard30 pagesEnglish languagesale 15% off
IEC 62629-62-12:2025 specifies the standard measuring conditions and measurement methods for determining image quality for 3D displays that produce virtual images, such as 3D heads‑up displays in which the 3D visual information is superimposed with the outside world. Eyewear displays are however beyond the scope of this document.
The scope of this document does not intend to include eyewear displays considering the difference between a head-up display and an eyewear display in the aspect of eye box size and field of view. The eye-tracking function is disabled in the image quality measurement of this document.
- Standard28 pagesEnglish languagesale 15% off
IEC 62906-6-1:2025 specifies a two-dimensional visualization method of the colour gamuts of a device under test (DUT) and a reference (REF) in the CIE 1976 L*a*b* (CIELAB) colour space and the intersection between them. This document applies to front projection displays which use either lasers or laser hybrid, or both light sources. The hybrid light sources can use both lasers and spontaneous emission-based light sources. Both full-frame projection technologies and raster-scanning projection displays are included.
- Standard36 pagesEnglish languagesale 15% off
IEC 62341-6-1:2025 specifies the standard measurement conditions and measuring methods for determining the optical and electro-optical parameters of organic light emitting diode (OLED) displays. Except for the power consumption method, all methods are intended for unbounded input signals measured in the flat regions of the display in a dark room. This fourth edition cancels and replaces the third edition published in 2022. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- The standard average picture level (APL) RGBCMY test pattern is modified, and the variable signal loading RGBCMY test pattern is added.
- Chromaticity gamut area and colour gamut volume are modified.
- Standard52 pagesEnglish languagesale 15% off
IEC 62595-1-2:2024 gives the preferred terms, their definitions and symbols, for display lighting units such as backlight units of transmissive and transflective displays, and frontlight units of reflective displays, with the objective of using standardized terminology when publications are prepared.
- Standard38 pagesEnglish languagesale 15% off
- Standard1 pageEnglish languagesale 15% off
IEC 62341-6-7:2024 specifies the standard measuring conditions and measuring methods for determining the optical characteristics of an OLED display with under-screen camera; other under-screen features, such as under-screen fingerprint or under-screen time of flight (TOF) can also be applied. This document applies to OLED displays such as mobile phone, monitor and TV with under-screen features.
NOTE Under-screen feature will want the display to be partially transparent and partially non-transparent, and this can be achieved only by certain types of display technology, for example OLED. This document mainly focuses on OLED display with under-screen feature.
- Standard21 pagesEnglish languagesale 15% off
IEC 62977-2-7:2024 specifies standard measuring conditions and measurement methods for determining the optical characteristics of tiled displays which consist of multiple display modules in order to form one screen. These methods apply to emissive and transmissive direct view flat displays that render real 2D images with all modules lying in the same plane. The methods are applicable in environments where the measuring conditions can be controlled, such as laboratory and production testing.
NOTE The measurement results are not specific values for the products. They can vary according to the measurement method and light measuring device (LMD) used in the calibration.
- Standard23 pagesEnglish languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...