IEC 62148-11:2009

Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin active device modules

IEC 62148-11:2009 covers physical interface specification for modulator integrated laser diode transmitters. The object of this standard is to adequately specify the physical requirements of an optical transmitter that will enable mechanical interchangeability of transmitters complying with this standard both at the printed circuit board and for any panel mounting requirement. This second edition cancels and replaces the first edition. The first edition was limited to 14-pin modulator-integrated laser diode transmitters. The second edition has been expanded to include 14-pin pump lasers and the title changed to reflect the new scope.
This publication is to be read in conjunction with IEC 62148-1:2002.

Composants et dispositifs actifs en fibres optiques - Normes de boîtier et d'interface - Partie 11: Modules de dispositifs actifs de 14 broches

La CEI 62148-11:2009 couvre les spécifications de l'interface physique des émetteurs à diode laser à modulateur intégré. Le but de la présente norme est de spécifier de façon adéquate les exigences physiques applicables aux émetteurs optiques de façon à permettre l'interchangeabilité mécanique des émetteurs conformes à cette norme à la fois sur les cartes à circuits imprimées et pour toutes les exigences concernant le montage des panneaux. Cette deuxième édition annule et remplace la première édition. La première édition ne concernait que les émetteurs à diode laser de 14 broches à modulateur intégré. Cette deuxième édition a été étendue afin d'inclure les lasers pompés de 14 broches, et le titre adapté afin de refléter le nouveau domaine d'application.
Cette publication doit être lue conjointement avec la CEI 62148-1:2002.

General Information

• Status: Published
• Publication Date: 24-Jun-2009
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: SC 86C - Fibre optic systems and active devices
• Current Stage: PPUB - Publication issued
• Start Date: 31-Jul-2009
• Completion Date: 25-Jun-2009

Relations

• Revises: IEC 62148-11:2003 - Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator-integrated laser diode transmitters
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 62148-11 ®
Edition 2.0 2009-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic active components and devices – Package and interface standards –
Part 11: 14-pin active device modules

Composants et dispositifs actifs en fibres optiques – Normes de boîtier et
d'interface –
Partie 11: Modules de dispositifs actifs de 14 broches

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
IEC 62148-11 ®
Edition 2.0 2009-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic active components and devices – Package and interface standards –
Part 11: 14-pin active device modules

Composants et dispositifs actifs en fibres optiques – Normes de boîtier et
d'interface –
Partie 11: Modules de dispositifs actifs de 14 broches

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
M
CODE PRIX
ICS 33.180.20 ISBN 978-2-88910-629-5
– 2 – 62148-11 © IEC:2009
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope and object.6
2 Normative references .6
3 Abbreviations .6
4 Classification.6
5 Specification of fibre optic transmitter module .6
5.1 Pigtail interface .6
5.2 Electrical interface.7
5.2.1 General .7
5.2.2 Numbering of electrical terminals.7
5.2.3 Pin function definition .7
6 Outline and footprint of fibre optic transmitter module.9
6.1 Drawing of case outline .9
6.2 Drawing of case outline .10
6.3 Drawings of footprint .11
Bibliography.12

Figure 1 – Electrical terminal numbering assignments (viewed from the top of the
module) .7
Figure 2 – Case outline for 14-pin modulator integrated laser transmitters .9
Figure 3 – Case outline for 14-pin pump lasers .10
Figure 4 – Footprint .11

Table 1 – Pin-function definitions for modulator integrated laser diode device.7
Table 2 – Pin-function definitions for pump laser diode device .8

62148-11 © IEC:2009 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PACKAGE AND INTERFACE STANDARDS –

Part 11: 14-pin active device modules

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62148-11 has been prepared by subcommittee 86C: Fibre optic
systems and active devices, of IEC technical committee 86: Fibre optics.
This standard is to be read in conjunction with IEC 62148-1.
This second edition cancels and replaces the first edition, published in 2003, and constitutes
a technical revision.
The first edition was limited to 14-pin modulator-integrated laser diode transmitters. The
second edition has been expanded to include 14-pin pump lasers and the title changed to
reflect the new scope.
– 4 – 62148-11 © IEC:2009
The text of this standard is based on the following documents:
FDIS Report on voting
86C/882/FDIS 86C/898/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 62148 series, published under the general title Fibre optic active
components and devices – Package and interface standards, can be found on the IEC
website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
62148-11 © IEC:2009 – 5 –
INTRODUCTION
Modulator integrated laser diode transmitters are used to convert electrical signals into optical
signals. Pump diode lasers are used to supply optical pump power in the rare earth doped
optical fibre amplifiers. This standard covers the physical interface for modulator integrated
laser diode transmitters and pump diode lasers. These transmitters and lasers are designed
as a pigtailed 14-pin butterfly package with thermo-electric cooler.

– 6 – 62148-11 © IEC:2009
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PACKAGE AND INTERFACE STANDARDS –

Part 11: 14-pin active device modules

1 Scope and object
This part of IEC 62148 covers physical interface specification for modulator integrated laser
diode transmitters.
The object of this standard is to adequately specify the physical requirements of an optical
transmitter that will enable mechanical interchangeability of transmitters complying with this
standard both at the printed circuit board and for any panel mounting requirement.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 60793-2-50: Optical fibres – Part 2-50: Pr
...