IEC 60351-2:1976
(Main)Expression of the properties of cathode-ray oscilloscopes - Part 2: Storage oscilloscopes
Expression of the properties of cathode-ray oscilloscopes - Part 2: Storage oscilloscopes
Applies to storage oscilloscopes with special devices incorporated in the cathode-ray tube permitting the recording of a signal in another way than by the ability of the screen coating to ensure persistence of the display of information.
Expression des qualités des oscillographes cathodiques. Deuxième partie: Oscillographes à mémoire
S'applique aux oscillographes à mémoire comportant des dispositifs spéciaux incorporés dans le tube cathodique permettant l'enregistrement d'un signal autrement que par l'aptitude du revêtement de l'écran à assurer la persistance de la représentation de l'information.
Izražanje lastnosti osciloskopov s katodno cevjo – 2. del: Spominski osciloskopi
General Information
Standards Content (Sample)
SLOVENSKI SIST IEC 60351-2:2005
STANDARD
junij 2005
Izražanje lastnosti osciloskopov s katodno cevjo – 2. del: Spominski
osciloskopi
Expression of the properties of cathode-ray oscilloscopes – Part 2: Storage
oscilloscopes
ICS 17.220.20 Ref
...
This May Also Interest You
IEC 61557-13:2023 defines special performance requirements for hand-held and hand manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems up to 1 000 V AC and 1 500 V DC taking into account the influence of high external low-frequency magnetic fields and other influencing quantities. See Annex A for examples of measurement applications.
This document does not apply to current clamps or sensors that are used in combination with devices for insulation fault location in accordance with IEC 61557-9, unless it is specified by the manufacturer.
IEC 61557-13:2023 cancels and replaces the first edition published in 2011. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the term "fixing device" has been removed;
b) the measuring range was changed to a display range, the indication of DC or peak values has been added in 4.1;
c) the frequency for the test of sensitivity for low-frequency magnetic fields has been defined in 4.2;
d) the specified measuring range is now defined as the range of indicated values based on the operating uncertainty in 4.3;
e) alignment of the structure with that of the whole IEC 61557 series;
f) the variation E12 (maximum load current), may be specified according to the manufacturer’s specification.
- Standard41 pagesEnglish and French languagesale 15% off
IEC 61557-16:2023 specifies the requirements applicable to the performance for test and measurement equipment in order to determine the effectiveness of the protective measures for electrical equipment and/or medical electrical equipment described in IEC 62353.
This International Standard is to be used in conjunction with IEC 61557-1:2019.
IEC 61557-16:2023 cancels and replaces the first edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) splitting of uncertainty requirements for medical and non-medical electrical equipment in 4.2.1;
b) addition of a definition of ranges with defined uncertainty in 4.2.1 to 4.2.7;
c) addition of an optional measuring device (MD) for non-medical devices in 4.2.1;
d) addition of a limitation of the maximum intrinsic uncertainty for medical applications at leakage current in 4.2.1;
e) change of 4.2.3 from test sockets to sockets for service purposes;
f) addition of a warning in the operating instructions;
g) integration of former 6.3 into 6.2;
h) update of Table 1;
i) alignment of the structure with that of the whole IEC 61557 series.
- Standard42 pagesEnglish and French languagesale 15% off
IEC 61557-14:2023 defines special requirements for test and measurement equipment used to determine the electrical safety of electrical equipment of machinery in accordance with IEC 60204-1.
This International Standard is to be used in conjunction with IEC 61557-1:2019.
IEC 61557-14:2023 cancels and replaces the first edition published in 2013. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) clarifying the introduction;
b) replaced "dielectric strength" by "voltage test";
c) requirement for maximum output current has been added in 4.2.6.1;
d) tripping time at electrical switching activated by two-hand operation has been added in 4.2.6.1;
e) additional time limiting capability for the protection against electric shock for test persons and bystanders in 4.2.6.2;
f) updated references for safety testing;
g) alignment of the structure with that of the whole IEC 61557 series.
- Standard33 pagesEnglish and French languagesale 15% off
IEC 61557-7:2019 is available as IEC 61557-7:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61557-7:2019 specifies the requirements applicable to measuring equipment for testing the phase sequence in three-phase distribution systems. Indication of the phase sequence can be mechanical, visual and/or audible. This document does not apply to additional measurements for other quantities. It does not apply to monitoring relays. IEC 61557-7:2019 cancels and replaces the second edition published in 2007. This edition constitutes a technical revision. This edition includes the following changes with respect to the previous edition:
a) alignment of the structure with that of the whole IEC 61557 series;
b) updated requirements in 4.3 in accordance with new editions of IEC 61010-1 and IEC 61010-031;
c) the information on markings was extended;
d) the information on the operating instructions was extended;
e) complement to the information on the testing of leads;
f) test leads for insulated conductors were introduced;
g) Annex B was added with information on phase sequence tests and indications.
- Standard28 pagesEnglish and French languagesale 15% off
- Standard75 pagesEnglish and French languagesale 15% off
- Standard9 pagesEnglish and French languagesale 15% off
IEC TS 63383:2022 deals with cybersecurity related to measuring devices (PMD according to IEC 61557-12 and PQI according to IEC 62586-1) and devices for data collection (devices according to IEC 62974-1) that are intended to be installed in restricted access areas.
This document deals with cybersecurity aspects (e.g. device hardening or device resilience) of device(s) used for power metering and monitoring, power quality monitoring, data collection and analysis, but does not cover requirements for organisational cybersecurity (e.g. end-user security policy).
This document is a first attempt to develop awareness by manufacturers and other relevant stakeholders about cybersecurity aspects and provide basic guidance for achieving the appropriate security mitigation against vulnerabilities to security threats:
– in coherence with device/system approaches described in relevant standards such as IEC 62443 (all parts) and ISO/IEC 27001,
– based on generic system use-cases.
This document does not cover billing meters covered by the IEC 62053-2x set of standards.
- Technical specification30 pagesEnglish languagesale 15% off
- Standard2 pagesEnglish and French languagesale 15% off
- Standard2 pagesEnglish and French languagesale 15% off
IEC 60477-2:2022 applies to resistors intended as laboratory AC resistors for use over a range of frequencies from DC up to a stated frequency which is not in excess of 1 MHz. Such resistors are hereinafter referred to as "AC resistors".
In addition to satisfying the requirements of IEC 60477-1, resistors satisfying the requirements of this document are designed to have a small variation of resistance and a small phase displacement over the stated frequency range.
IEC 60477-2:2022 cancels and replaces the first edition published in 1979, and Amendment 1:1997. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) extended the AC resistor frequency range to 1 MHz;
b) updated the terms and definitions according to IEC 60050 series;
c) added the definition of AC/DC difference of an AC resistor;
d) added the resistor classification according to the AC resistance or AC/DC difference index;
e) updated the classification according to the AC resistor construction;
f) updated the safety symbols and requirements according to IEC 60477-1;
g) added the three-element equivalent circuits of an AC resistor in Annex C;
h) added the annex on constructions of AC resistors.
- Standard54 pagesEnglish and French languagesale 15% off
IEC 60477-1:2022 applies to resistors intended for use as laboratory DC resistors (hereinafter referred to as "resistors") comprising standard resistors, single or multiple resistors of accuracy Classes 0,000 05 to 10 and single or multi-dial resistors of accuracy Classes 0,000 5 to 10.
This document does not apply to:
1) resistors which are intended for use solely as permanently mounted circuit components,
2) resistors used on alternating current or on pulsed current,
3) active resistors,
4) series resistors and shunts which are considered as accessories of electrical measuring instruments in the relevant IEC document (examples of these are as follows).
IEC 60477-1:2022 cancels and replaces the first edition of IEC 60477 published in 1974, and its Amendment 1:1997. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) extended the resistor accuracy classes;
b) deleted the resistor accuracy class expression in parts per million (ppm);
c) excluded the active resistor from the scope of this document;
d) updated the terms and definitions according to new IEC 60050 series;
e) changed the term "resistance decade" to "resistance dial" to cover the multi-dial resistors with other resistance step values;
f) updated the intrinsic error to intrinsic uncertainty according to IEC 60359;
g) added the limits of relative stability for resistors of classes 0,000 05 to 0,01;
h) added the requirements of high voltage resistors;
i) updated the safety symbols and requirements according to the new IEC 61010 series;
j) updated the insulation resistance requirements of resistors;
k) added the requirements of temperature coefficient;
l) updated the temperature requirements for transport and storage of resistors.
- Standard55 pagesEnglish and French languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.