iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 61628-2:1998/AMD1:2007

(Amendment)

Amendment 1 - Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test

Amendment 1 - Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test

Amendement 1 - Cartons et papiers comprimés ondulés à usages électriques - Partie 2: Méthodes d'essais

General Information

Status
Published
Publication Date
05-Jun-2007
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
29.035.10 - Paper and board insulating materials
Technical Committee
TC 15 - Solid electrical insulating materials
Drafting Committee
MT 14 - TC 15/MT 14
Current Stage
PPUB - Publication issued
Start Date
15-Nov-2007
Completion Date
06-Jun-2007
Ref Project

Relations

Amends
IEC 61628-2:1998 - Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test
Effective Date
05-Sep-2023

Buy Standard

IEC 61628-2:1998/AMD1:2007 - Amendment 1 - Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of testIEC 61628-2:1998/AMD1:2007 - Amendment 1 - Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test
PreviousNext
Standard
IEC 61628-2:1998/AMD1:2007 - Amendment 1 - Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test
English and French language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


INTERNATIONAL IEC
STANDARD
CEI
61628-2
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
2007-06
Amendment 1
Corrugated pressboard and presspaper
for electrical purposes –
Part 2:
Methods of test
Amendement 1
Cartons et papiers comprimés ondulés
à usages électriques –
Partie 2:
Méthodes d’essais
Reference number
Numéro de référence
IEC/CEI 61628-2 Amend. 1:2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de
référence, texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou
remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
INTERNATIONAL IEC
STANDARD
CEI
61628-2
NORME
INTERNATIONALE
AMENDEMENT 1
AMENDMENT 1
2007-06
Amendment 1
Corrugated pressboard and presspaper
for electrical purposes –
Part 2:
Methods of test
Amendement 1
Cartons et papiers comprimés ondulés
à usages électriques –
Partie 2:
Méthodes d’essais
PRICE CODE
C
CODE PRIX
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
Pour prix, voir catalogue en vigueur

– 2 – 61628-2 Amend. 1 © IEC:2007
FOREWORD
This amendment has been prepared by IEC technical committee 15: Solid electrical insulating
materials.
The text of this amendment is based on the following documents:
CDV Report on voting
15/293/CDV 15/340/RVC
Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the maintenance result d
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60763-2:2007(Main)
Specification for laminated pressboard - Part 2: Methods of test

IEC 60763-2:2007 gives methods of test applicable for the material classified in IEC 60763-1. This edition includes the following significant technical changes with respect to the previous edition:
The standard has generally been revised editorially and brought into line with IEC 60641-2;
The test method for the determination of the internal ply strength has been replaced with an alternative method; and
The test method for the determination of the thermal resistance has been enlarged in its scope.

  • Standard
    19 pages
    English language
    sale 15% off
  • Standard
    37 pages
    English and French language
    sale 15% off
  • Standard
    80 pages
    English and French language
    sale 15% off
IEC
IEC 60667-2:2020(Main)
Vulcanized fibre for electrical purposes - Part 2: Methods of test

IEC 60667-2:2020 gives methods of test for vulcanized fibre sheets for electrical purposes. Material made by combining with an adhesive several thicknesses of vulcanized fibre is not covered by this document. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application is based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. Safety warning: It is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner. This second edition cancels and replaces the first edition published in 1982. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) added Terms and definitions
b) added General notes on tests
c) added Thickness instead of dimension
d) changed Apparent density from Density
e) added Arc resistance
f) deleted Sulphate content
g) added method (Bending) for flexibility
h) changed test method for internal ply adhesion
i) added Shrinkage

  • Standard
    28 pages
    English and French language
    sale 15% off
IEC
IEC 60667-1:2020(Main)
Vulcanized fibre for electrical purposes - Part 1: Definitions and general requirements

IEC 60667-1:2020 gives the definitions and general requirements for vulcanized fibre sheets for electrical purposes. Materials made by combining with an adhesive several thicknesses of vulcanized fibre are not covered by this document. Materials that conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application is based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. Safety warning: it is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner. This second edition cancels and replaces the first edition published in 1980. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
deletion of "corrugated, round rods, and round tubes" from the Scope;
types A, B and C replaced by general and fishpaper types and addition of a symbol for each type in the classification;
addition of white, blue, brown, and addition of a symbol for each colour;
deletion of the thickness of 15,0 mm, the length, the mass and the dimension of rolls from the general requirements;
addition of the manufacturer's name, trademark (if any), nominal thickness, manufacture date, and lot number in the conditions of supply.

  • Standard
    17 pages
    English and French language
    sale 15% off
IEC
IEC 60667-3-1:2020(Main)
Vulcanized fibre for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Flat sheets

IEC 60667-3-1: 2020 gives requirements for vulcanized fibre sheets for electrical purposes. Materials made by combining with an adhesive several thicknesses of vulcanized fibre are not covered by this document. Materials that conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application is based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. Safety warning: it is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner. This second edition cancels and replaces the first edition published in 1986. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
change to the range of thickness deviation in Table 1;
addition of apparent density in Table 1;
change to the range of thickness for tensile strength in Table 1;
addition of flexibility and shrinkage in Table 1;
change test method and property value of internal ply adhesion on Table 1.

  • Standard
    16 pages
    English and French language
    sale 15% off
IEC
IEC 60819-3-4:2013(Main)
Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles

IEC 60819-3-4:2013 specifies requirements for two types of aramid fibre paper containing mica particles and designated as PAaM:
- type 1: calendered aramid paper containing mica particles;
- type 2: uncalendered aramid paper containing mica particles. Materials which conform to this specification meet established levels of performance. However, the selection of material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. SAFETY WARNING: It is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: the document was updated including new thicknesses and relevant values as from Table 1. Keywords: aramid fibre paper containing mica particles, PAaM, calendered, uncalendered

  • Standard
    17 pages
    English and French language
    sale 15% off
IEC
IEC 60819-3-3:2011(Main)
Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers

IEC 60819-3-3:2011 is a sheet of IEC 60819-3 specifies requirements for four types of unfilled aramid papers:
- Type 1: calendered paper;
- Type 2: calendered paper, with improved tearing resistance and conformability;
- Type 3: uncalendered paper;
- Type 4: calendered paper, with lower density for laminating.
This edition includes the following significant technical changes with respect to the previous edition:
- normative references change: all the requirements are now determined according the clauses of test methods from IEC 60819-2 specific for non cellulosic papers, instead of IEC 60554-2:2001 generally valid for cellulosic papers;
- and some new, very thin thicknesses, of type 4, calendered paper with lower density for laminating, were added.

  • Standard
    16 pages
    English and French language
    sale 15% off
IEC
IEC 60763-1:2010(Main)
Laminated pressboard for electrical purposes - Part 1: Definitions, classification and general requirements

IEC 60763-1:2010 contains the definitions required for the understanding of all three parts of IEC 60763, the classification of material into types, and the general requirements applicable to all material covered by the standard. The main changes with respect to the previous edition is that the specification was brought in line with the second edition of IEC 60641-1(2007).

  • Standard
    12 pages
    English and French language
    sale 15% off
IEC
IEC 60763-3-1:2010(Main)
Laminated pressboard for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for laminated precompressed pressboard, Types LB3.1A.1 and LB3.1A.2

IEC 60763-3-1:2010 gives the requirements for laminated precompressed boards comprised of 100 % sulphate wood pulp. The main changes with respect to the previous edition are:
- requirements for the new properties in Part 2 have been integrated;
- specifications for type LB3.3.1 and LB3.3.2 have been deleted.

  • Standard
    9 pages
    English and French language
    sale 15% off
IEC
IEC 60819-1:2009(Main)
Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements

IEC 60819-1:2009 gives the definitions and general requirements for non-cellulosic papers for electrical purposes. The main changes from the previous edition are as follows: the list of materials to be used in combination was updated with the addition of new materials made available by progress in technology and described in Subclauses 2.7 and 2.8.

  • Standard
    16 pages
    English and French language
    sale 15% off
IEC
IEC 60641-3-1:2008(Main)
Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and B.6.1

IEC 60641-3-1:2008 gives the requirements for pressboard for electrical purposes comprised of 100 % sulphate wood pulp or a mixture of sulphate wood pulp and cotton. The main changes with respect to the previous edition are:
- Requirements for types B.0.3 and B.5.3 were added;
- The precompressed type B.3.1 was divided in B.3.1A and B.3.1B (higher flexibility);
- Types B.6.1 has been replaced with a new type, but the designation has been kept;
- Type B.7.1 has been deleted;
- The thickness relation of the properties has been simplified; and
- The values were adjusted to today's needs of users.

  • Standard
    21 pages
    English and French language
    sale 15% off